Brochure

Physical sensors
with KNX connection
Temperature, humidity
341
Siemens Switzerland Ltd www.siemens.com/gamma 2021
Smart Infrastructure
11
Front module for base modules, humidity and temperature (active)
 Front module with humidity and temperature sensor for plugging onto the Base module
 Matching the DELTA line and DELTA miro frame program
Data sheet
N1411
Measurement range humidity
0…100 % r.h.
Sensing element, temperature
Active
Measuring range, temperature
0…50 °C
Signal output temperature
Active
Color
Titanium white
Degree of protection
IP30
Dimensions (W x H x D)
55 x 55 x 12 mm
Warranty
5 Years
AQR2535NNW
Stock no.
Product no.
S55720-S141
AQR2535NNW
Matching the DELTA line and DELTA miro frame program. See chapter Display and Operation Units.
The relevant base modules must be ordered separately. See chapter Physical sensors.
Dual sensor for brightness measurement, temperature measurement, sun
protection control, lighting control
 Brightness measurement, temperature measurement, sun protection control, lighting control
 For the detection and transmission of brightness and temperature
 Temperature measuring range -25 °C...+55 °C
 Brightness measuring range 1 Lux...100 kLux
 Horizontal sensing angle -60°...+60°, vertical -35°...+66.5°
 For the control of switch, dimming and shutter/blind actuators, depending on the ambient luminosity
and/or ambient temperature
 One sun protection channel for the automatic control of sun protection equipment, with
 Starting and stopping of automation by means of an object or a dusk threshold
 Up to three brightness thresholds for determining the height and position of the shutters/blinds or
roller shutters
 Optional teach-in of dusk thresholds and brightness thresholds by means of a teach-in facility
 Blocking object for the temporary deactivation of the sun protection channel function
 Up to four universal channels for the control of switch, dimming and shutter/blind actuators,
depending on ambient luminosity and/or temperature. Optionally available with:
 Threshold switches for brightness
 Threshold switches for temperature
 Threshold switches with logical combination of brightness and temperature
 Optional teach-in of brightness threshold for each universal channel by means of an associated teach-
in facility
 Deactivation option for each universal channel by means of an associated blocking object (1 bit)
 Optional second object for transmission of a second telegram on fulfillment of threshold conditions
 Bus-powered electronics
 Integrated bus coupling units
 Bus connection via bus terminal
 Surface mounting
 Degree of protection: IP54
Data sheet
A6V10416100
Dimensions (W x H x D)
72 x 110 x 54 mm
AP 254/02
Stock no.
Product no.
5WG1254-3EY02
AP 254/02