Data Sheet for Product

PRODUCT DATA
ODS10
FEATURES
• Fits in standard wallbox and replaces single-pole
wall switch. Gangable with other units.
• Low-profile design eliminates obtrusive “scan-
ning-device” look. Elegant Decora wallplates
complement any interior for sleek aesthetics;
uses Decora wallplates and coordinates with
Leviton’s popular line of Decora wiring devices.
• 180° field-of-view provides approximately 2100
square feet of coverage suitable for small offic-
es, conference rooms, classrooms, lounges and a
variety of commercial areas.
• Convenient pushbutton provides manual-ON/OFF
light switching at any time.
• Two dual element PIR sensors used to widen
detection range.
• Segmented Fresnel lens provides optimum sensi-
tivity and performance. Designed with an exten-
sive “minor motion” area where even slight body
movements will be detected.
• Vandal resistant PIR lens.
• Patented Blinders - horizontal field-of-view may
be adjusted between 180° and 60° of arc by
using integral blinders located on either side of
the lens. No masking tape required.
• Manual-ON/auto-OFF mode for installations where
manual-ON switching is required but auto-OFF
switching is still desired for CA Title 20/24 energy
savings.
• To comply with CA Title 20, red LED indicator
light flashes wh en sensor detects motion to
verify detection is active.
•Time Delay adjustment for delayed-OFF time set-
tings of 30 seconds (for walking test), 10 minutes,
20 minutes, and 30 minutes. Allows customized
adjustments to maximize energy savings.
• Light Sensor Adjustable Ambient Light Override
ranges from approximately 2 foot-candles (20
lux) to 500+ foot-candles (5000+ lux) to prevent
lights from turning ON automatically during peri-
ods of ample natural light, increasing energy sav-
ings.
• Light sensor enables the load hold-OFF feature
once level has been set.
• Vacancy confirmation - when the time out expires
and the lights turn OFF a 30 second vacancy con-
firmation exists to turn the lights back ON.
• False detection circuitry.
• Presentation Mode feature for slide or film pre-
sentations allows push buttons to turn lights OFF
and keep them OFF while the room is occupied.
• One unit can be used for 120V through 277V
lighting. Compatible with both electronic and
magnetic ballasts.
• Relay switches at the zero crossing point of the
AC power curve to ensure maximum contact life
and compatibility with electronic ballasts.
• Exclusive Leviton H.I.S. Circuitry. Specifically
designed to handle today’s high inrush electronic
ballast loads and offer unmatched durability and
service.
• No neutral design is optional for retrofit applica-
tions.
ODS10-ID
Field-of-View (in feet)
FIELD-OF-VIEW
The ODS10-ID provides a 180° field-of-view with a
maximum coverage area of approximately 2100
square feet. The maximum sensing distance in
front of the sensor is 40 feet, and at each side is
30 feet. A “minor motion” zone detects relatively
small body movements and allows the lights to
stay ON even though a person may not be mov-
ing or walking around the room. The remainder of
the field-of-view, the “major motion” zone, exhibits
a lesser degree of sensitivity and requires larger
movements.
TOP VIEW
SIDE VIEW
15 40
0
0
15
15
30
30
40
40
4
Minor Motion, IR
Major Motion, IR
5
0