Data Sheet for Product

PE200-1/
PE200-7
Product
Specifications
APPLICATION
• Leviton’s PE200-1 Power Extender allows a
dimming zone’s power handling capacity to be
extended to a full 1920VA on 120V input power.
The PE200-1 will drive 120V Advance Mark X™ or
equivalent dimmable fluorescent ballasts only.
• Leviton’s PE200-7 Power Extender allows a
dimming zone’s power handling capacity to be
extended to a full 3000VA on 277V input power.
The PE200-7 will drive 277V Advance Mark X or
equivalent dimmable fluorescent ballasts
FEATURES & BENEFITS
• Works with Mark X or Hi-lume® 120V
(Cat. No. PE200-1) and 277V
(Cat. No. PE200-7) dimmable ballasts
• Low-end trim available for setting the minimum
brightness level
• Emulates the characteristics of the dimmer that it
is connected to in terms of dimming range and
resolution
• Works with any Dimensions Multizone
Controller/Dimmer when zone is set-up as
fluorescent dimmer to extend load capacity
on any zone
Mark X is a trademark of the Advance Transformer Company.
Hi-lume is a registered trademark of Lutron Electronic Co., Inc.
PE200-1/PE200-7 Power Extenders
PE200-1/PE200-7 Power Extenders
1
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: [phone]
Visit our Website at: www.leviton.com
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
SPECIFICATION SUBMITTAL
SPECIFICATIONS
Compatibility
• For Box Mounted Dimmers: Must use a 120V, 600VA Mark X
version from the following families: Monet™, IllumaTech™, Mural™,
and TouchPoint™
• For dimmers that include a Neutral wire (such as some scene-
capable dimmers), the dimmer Neutral wire must be connected
• For Architectural Systems: Works with all families
Electrical
Input Voltage: 120V, 50/60Hz (PE200-1); 277V 50/60Hz (PE200-7)
Load Rating: 1920VA@120VAC fluorescent (PE200-1);
3000VA@277VAC fluorescent (PE200-7)
Load Output Power: Phase independent of control device
Dimmer Input: 120V 50/60Hz for PE200-1 and PE200-7
Testing/Code Compliance: UL Listed, CSA Certified and FCC Part 15
Physical
Color: Aluminum clear anodized extruded heat sink with a snap-on
molded white cover
Size: 4.72"L x 4.5"W x 0.5"H (120mm x 114mm x 12.7mm)
Environmental
Operating Temperature Range: 0ºC to 40ºC
Storage Temperature Range: -10ºC to 85ºC
Relative Humidity: 20%-90% non-condensing
Warranty: Limited 2-Year Warranty
2.06
(52.3 mm)
2.80
(71.1 mm)
4.72
(119.9 mm)
4.50
(114.3 mm)