User Manual
9/14
Siemens ET D1 · 2018/2019
Switching/Pushbutton Control/Dimming
Inserts
9
Version Order No.
5TC8211-0
Led Dimmer
•
Power supply 230V~ 50/60Hz.
•
Consumption 2VA. Valid for... Dimmable LED lamps:
- 230V~ LED lamp 4W ~ 100W
- 2V~ LED lamp (with electronic transformer)
•
1 lamp/transfo & max. 6 transformers (50W).
•
Admits up to...3 lighted pushbuttons &unlimited non-lighted.
•
Dimensions 45 x 45 x 12 mm. Weight: 23 g..
•
Working temperature 0ºC ~ +40ºC.
•
Storage temperature -30ºC ~ +70ºC.
•
Environmental protection
•
IP20 according to DIN EN 20324. According to the Standard DIN EN 60669-2-1
5TC8211-0
5TC8212-0
Dimmer for Led 12-48vcc
•
Power supply: 12 - 48V DC *.
•
Consumption: <12mA. Valid for... LED lamps 12-48V DC.
•
Maximum load 8A. Minimum brightness level: 1% ~ 60%.
•
Dimming speed 0% a 100%: 3seg ~ 10seg.
•
Control: Pushbutton referred to ground or pushbutton isolated referred
to 230V~.
•
Dimensions: 45 x 45 x 12mm.
•
Weight: 23g.
•
Operation temperature. 0ºC to +40ºC.
•
Storage temperature: -30ºC to +70ºC.
•
Protection degree: IP20 according to UNE 20324. According to the
Standard: EN 60669-2-1
5TC8212-0
Note Section Page
For Technical specifications, see ... Technical Information /
Dimmers / Led Dimmer
16/24
Note Section Page
For Technical specifications, see ... Technical Information /
Dimmers / Dimmer for Led
12-48Vcc
16/25
5TC8213-0
Dimmer for dimmable compact fluorescent lamps
•Power supply 230V~ 50Hz.
•Consumption 3VA.
•Valid for Dimmable Compact Fluorescent lamps.
•Load 20W ~ 200W.
•Dimensions 45 x 45 x 12 mm.
•Weight: 40g.
•Working temperature 0ºC ~ +40ºC.
•Storage temperature -30ºC ~ +70ºC.
•Environmental protection IP20 according to EN 60529.
•According to the Standard DIN EN 60669-2-1.
5TC8213-0
Note Section Page
For Technical specifications, see ...
16/26
Technical Information /
Dimmers / Dimmer for
Dimmable Compact ...
T5 C8424
5TC8424
Inserts for lighting control/switching
Electronic potentiometers, switch
• Control device for the brightness of fluorescent lamps
• Connection to electronic primary switching devices (ECG) with control
input 1 ... 10 V DC
• With pushbutton ON/OFF switch and rotary operation
• For claw and screw fixing
• Screw terminals with anti-slip terminal body for solid and finely stranded
conductors
• Control voltage: 1 ... 10 V DC
• Max. control current: 50 mA
• Load connection: 230 V AC/4 A
• Trimming potentiometer for setting basic brightness
• Rotary potentiometer with soft notching
• V
DE
and KEMA certification
Switching capacity
• OSRAM Quicktronik, dimmable,
1 x 58 W LL
Max. 6 units
• OSRAM Quicktronik, dimmable,
1 x 36 W LL
Max. 9 units
Symbol For tops see section Page (ff.)
Design / i-system / Lighting Controls
Note Section Page
For Technical specifications, see ... Technical Information /
Dimmers / Electronic poten-
tiometers, switches
Design / DELTA profil/Lighting Controls
Design / DELTA style/Lighting Controls
2
/21
5/16
6/16
16/31