User Manual

1/15
Siemens ET D1 · 2018/2019
Introduction
Perfect down to the very last detail
1
Whichever way you look at it: our inserts are perfect down
to the very last detail.
Our new combination screws for Torx and slotted screw drivers
ensure that there is no slipping of the screwdriver blade. The
screw is screwed with metric thread into the metal. Minimum
torques enable the secure fastening of the insert even when
mounted manually using a screwdriver. It is virtually impossible
to strip the thread.
Stripping lengths with tolerance specifications are clearly
labeled on the mounting bracket and the bottom of the base.
This helps prevent faults caused if the strip length of the wire is
too short. Thanks to the uniform stripping length of 10 mm for
all switch models, in
cluding SCHUKO socket outlets, there are
no more tedious length adjustments required on the stripping
tool.
®
You can instantly see how the insert is connected:the circuit
diagram and item number on the back of the base with topo-
graphical wiring diagram preclude mounting errors due to
incorrect connection.
A rod spring ensures that the retracting claws are resistant to
ageing and reversible – even when repeatedly dismantled and
remounted.
If using deeper device boxes,
you can also retrofit our
extension claws. These
enable secure fastening
even in the event of struc-
tural changes – for example
if the area is subsequently
tiled. What's more: the
extension claws are
mounted as is – no need to
remove the normal claws
first
.