User Manual

16/15
Siemens ET D1 · 2018/2019
Technical Information
Dimmers
sys pushbuttons
16
Technical specifications
Dimensional drawings
Power supply Over 230 V user interface (230 V PEI) of the switch or sys dimmer inserts
Terminals
10-pole pin connector (230 V PEI) for connection to the switch or sys dimmer insert
Mechanical specifications
• Enclosure Plastic
• Dimensions (L x W x D)
i-system
DELTA profil
DELTA style
55 x 55 x 24 mm (incl. spring)
65 x 65 x 25 mm (incl. spring)
68 x 68 x 27 mm (incl. spring)
• Weight
Approx. 30 g
• Fire load
Approx. 950 kJ
• Mounting
Mounted on the switch or sys dimmer insert
Electrical safety
• Pollution degree (acc. to IEC 60664-1) 2
• Degree of protection (acc. to EN 60529)
IP20
• Overvoltage category (acc. to IEC 60664-1)
III
• Standard
According to EN 50090-2-2 and IEC 60664-1
EMC requirements
According to EN 50090-2-2, EN 61000-6-3, EN 61000-6-1
Environmental specifications
• Resistance to climate EN 50090-2-2
• Ambient operating temperature
-5 … +45 °C
• Storage temperature
-25 … +70 °C
• Relative humidity (non-condensing)
5 … 93 %
CE marking
According to EMC Directive (residential buildings), Low Voltage Directive
A
I2_08605a
B
D
C
A B C D
55 55 24 13
i-system
DELTA profil
DELTA style
65 65 25 14
68 68 27 16,5