User Manual

16/32
Siemens ET D1 · 2018/2019
16
Technical Information
Dimmers
Electronic potentiometers, switch (5TC8424)
Electronic potentiometers, pushbutton (5TC8425)
Electronic potentiometers for dimmer control
Technical specifications
N
L
PE
N
L
-
+
1
2
3
4
N
L
-
+
1
2
3
4
N
L
-
+
1
2
3
4
+
–
L N
+
PE
I2_12392
–
x
x
x
5TC8424
l.v. controller
ECG dynamic
ECG dynamic
ECG dynamic
Power supply
• Control voltage 1 ... 10 V
• Maximum control current
50 mA
• Load connection
2 A
Protection against short-circuits
With miniature fuse (the fuse holder contains a spare fuse)
Switching capacity
• Number of ECGs load output Depending on the remote control switch or installation contactor selected
• Number of ECGs control output
- Osram DIMM-ECG Max. 50
Terminals
4 screw terminals with anti-slip terminal body, the following conductor/cross-sections are permissible:
• 0,5 ... 4.0 mm² solid
• 0,5 ... 2.5 mm² finely stranded, with or without end sleeve (without insulating collar, gas-tight crimp
connection)
Mechanical specifications
• Enclosure Plastic
• Dimensions
Modular width: 71 mm x 71 mm, mounting depth: 32 mm
• Weight
Approx. 55 g
• Fire load
Approx. 1000 kJ
• Mounting
Installation in device boxes 60 mm Ø, 40 mm deep according to DIN 49073-1
Electrical safety
• Pollution degree (acc. to IEC 60664-1) 2
• Degree of protection (acc. to EN 60529)
IP20
• Overvoltage category (acc. to IEC 60664-1)
III
• Standard
According to EN 60669-2-1
EMC requirements
According to EN 60669-2-1
Environmental specifications
• Ambient operating temperature –5 ... +45 °C
• Storage temperature
–25 ... +70 °C
• Relative humidity (non-condensing)
5 ... 93 %
Approvals
VDE certification and KEMA certification
1