User Manual

16/58
Siemens ET D1 · 2018/2019
16
Technical Information
Shutter/Blind Controls
Comfort shutter/blind controls
Overview
Form of delivery for the Comfort shutter/blind control
Design
The shutter/blind control insert is mounted in a DIN 49073-
compliant device box (recommendation: deep box).
The terminals of the insert must be directed downwards.
The Comfort shutter/blind clock is plugged onto the insert
with the frame .
The electrical contacting is achieved over the plug .
The additional plug-in contacts or the socket contact of the
Comfort shutter/blind clock are used for the adaptation of the
sensor cable.
Connection options for the sun sensor cable
There are three ways to connect the sun sensor cable to the
Comfort shutter/blind control:
• Flush-mounting routing of the sun sensor cable
• Surface-mounting routing of the sun sensor cable
• Connection of the sun sensor cable by plugs
Flush-mounting routing of the sun sensor cable
When choosing the flush-mounting routing of the sun sensor
cable, a suitable cable must be selected. Re
commendation:
J-Y(ST)Y 2 x 2 x 0.6 mm (telephone cable). The plug at the sun
sensor must be removed. The individual wires of the sensor
cable are isolated and connected with the selected cable in a
suitable manner (soldering, screw terminals or similar).
In this context, it must be en
sured that the insulating tube (sup-
plied with the sun sensor) encloses the individual wires from the
external cable insulation to the terminal. The cable, together with
the insulating tube, is plugged through the drill hole of the
insert and passed through the cable duct to the terminal .
The terminal (supplied with the sun sensor) is put in the insert as
shown in the illustration.
I2_08802a
LN
Motor
Mo
Di
Mi
Do
Fr
Sa
So
Prog Zufall Astro
Uh
Da
C
Mode Set
A,B,C,/,Hand s / w
Mo
Di
Mi
Do
Fr
Sa
So
Prog Zufall Astro
Uh
Da
C
Mode Set
A,B,C,/,Hand s / w
5TC1526
Comfort shutter/
blind clock
Shutter/blind
control insert
Comfort shutter/
blind control
Sun sensor
(optional)
1
2
1
2
3
4
6
4
I2_08803
3
5
6
5
Shutter/blind control insert
Comfort shutter/blind clock
Frame
Plug
Plug-in contacts
Socket contact
I2_08804
2
1
3
2
1
3
Drilling
Cable duct
Terminal
1
2
3
4
5
6
1
2
3