User Manual

16/59
Siemens ET D1 · 2018/2019
16
Technical Information
Shutter/Blind Controls
Comfort shutter/blind controls
Surface-mounting routing of the sun sensor cable
The plug at the sun sensor must be removed. The individual
wires of the sensor cable are stripped and routed through the
insulating tube (supplied with the sun sensor).
The cable , together with the insulating tube, is then routed
directly underneath the supporting frame through the cable
duct to the terminal .
Connection of the sun sensor cable by plugs
The sun sensor cable is connected by plugging the plug of the
sensor into the socket of the Comfort shutter/blind clock.
Schematics
I2_08805a
2
1
3
4
2
1
4
3
1
5TC1526
Cable
Support frame
Cable duct
Terminal
L
N
N
L
AC 230 V ~
I2_08785
PE
M
1
~
Motor
2
1
3
4