User Manual

16/60
Siemens ET D1 · 2018/2019
Technical Information
Shutter/Blind Controls
Comfort shutter/blind controls
16
Programming
Operating and display elements
Factory settings
While program memories A and B are factory-assigned, they
can also be user-defined if required. Operating times that are no
longer required must be deleted.
Default factory settings:
• Memory A
- Switching time 1: 07:00, Mo to Fr, astro function active
- Switching time 2: 09:00, Sa to Su, astro function active
- Switching time 3: 20:00, Mo to Fr, astro function active
- Switching time 4: 21:00, Sa to Su, astro function active
• Memory B
- Switching time 1: 07:00, Mo to Fr, astro function not active
- Switching time
2: 09:00, Sa to Su, astro function not active
- Switching time 3: 20:00, Mo to Fr, astro function not active
- Switching time 4: 21:00, Sa to Su, astro function not active
• Memory C
- Not factory assigned.
Independent programs can be stored in the three program
memories A, B and C (e.g. for everyday, weekend,
vacations etc.).
All three program memories support a maximum of 18 switching
times.
The factory settings can be reset at any time.
Daylight savings
To implement daylight savings, the "Set" button must be briefly
pressed at the appropriate times on the respective dates in
spring and fall.
It can also be used to set whether or not any configured individ-
ual motor runtimes are to be executed.
Operating modes
The Comfort shutter/blind clock can be set to the "automatic" and
"manual" mode. It has three program memories (A, B, C), which
can be alternatively selected in the automatic mode.
• Automatic mode
The set switching times of the program memory A, B or C are
executed. Manual operation is also possible using the and
buttons. A, B or C is shown on the display.
• Manual operation
Manual operation is only possible by means of the and
buttons. The set switching times of the program mem
ories A,
B or C are not executed. A, B or C are not shown on the dis-
play.
Automatic mode with program memories A, B, C
In the three program memories, three individual switching time
programs can be generated. By selecting the A, B or C program
memory, the desired switching time program is activated.
By pressing the "Mode" button, it is possible to change between
the prog
ram memories (A, B, C) and manual operation.
Manual operation
A manual operation is possible with any operating mode. The
shutters/blinds are raised using the button and lowered using
the button.
During operation, a distinction is made between short and long
button strokes:
• Short button stroke (< 1 s)
A pulse is generated in accordance with the duration of the
key oper
ation. This function serves to adjust the blind slats.
• Long button stroke (> 1 s)
The shutter/blind control is set to maintained function (contin-
uous operation). If no other motor runtimes are programmed,
a runtime of approx. 2 min is executed.
Mo
Di
Mi
Do
Fr
Sa
So
Prog Zufall Astro
Uhr
Dat
Mode Set
A,B,C,/,Hand s / w
71
2
3
4
5
6
8
6
10
11
1213
14
15
16
17
18
19
20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
I2_08808
Lowering of shutter/blind activated
Raising of shutter/blind activated
Time display
Configuration mode activated
Random function activated
Astro function activated
Minute display
Set day of week
Twilight value underrun
Brightness value exceeded
Manually execute lowering of shutter/blind
Set values
Select mode
Manually execute raising of shutter/blind
Mode of operation daylight saving time
Learn function activated
Mode of operation winter time
Set date
Set time
Program memories A/B/C are activated
11
11
11
14
14
14