User Manual

ManualsBrandsSiemens ManualsOtherDELTA cataloge 2018/19

2/20

Siemens ET D1 · 2018/2019

i-system

Shutter/blind controls

Version Order No.

5TC1270

5TC1271

Shutter/blind control flush-mounting isolating relays

• Double, with individual control

• Relay for the control of several shutters or blinds

• Two motors can be controlled per isolating relay, even if further isolat-

ing relays are connected downstream

• Option for individual control of connected motors over shutter/blind

pushbutton (e.g. 5TA2 114)

• The isolating relay is to be installed into a surface-mounting or ﬂush-

mounting box (ﬂush-mounting box from 70 mm ∅ or surface-mounting

boxes from 100 mm x 100 mm)

• Only for in-phase operation

• 8 A (AC-1) or 3 A (ind.), 230 V AC, 50 Hz

• 58 mm

x 59 mm x 22 mm

Note Section Page

For Technical speciﬁcations, see ... Technical Information /

Shutter/Blind Controls /

Shutter/blind control

ﬂush-mounting isolating

relays

16/62

Note

Download the operating and mounting instructions from:

http://support.automation.siemens.com/ww/view/en/5tc1270/all

Shutter/blind control flush-mounting isolating relays, compact

• Relay for the control of several shutters or blinds

• A maximum of two motors can be connected per compact isolating

relay, whereby the drive connected to the marked motor terminals can

also be individually controlled over a shutter/blind pushbutton

• If cascaded, a motor can be connected to each compact isolating

relay, which can also be individually controlled over a shutter/blind

push

button

• The isolating relay is to be installed into a surface-mounting or ﬂush-

mounting box (ﬂush-mounting box from 60 mm ∅, 40 mm deep or

surface-mounting boxes

from 75 mm x 75 mm)

• Only for in-phase operation

• 8 A (AC-1) or 3 A (ind.), 230 V AC, 50 Hz

• 50 mm x 53 mm x 22 mm