User Manual

2/23
Siemens ET D1 · 2018/2019
2
i-system
Motion detectors
Version Order No.
Selection and ordering data
5TC1503 (front view)
5TC150 (rear view)
Versions
• Mounting height 1.10 m
- Titanium white (similar to RAL 9010) 5TC1503
• Mounting height 2.20 m
- Titanium white (similar to RAL 9010) 5TC1504
- Aluminum metallic (similar to RAL 9006) 5TC15030AM
- Aluminum metallic (similar to RAL 9006)
- Carbon metallic (similar to RAL 7016) 5TC15030CM
- Carbon metallic (similar to RAL 7016)
5TC1500
5TC1501
5TC1502
General information
• Size of tops: 55 mm x 55 mm
• Degree of protection: IP20
Note
Download the operating and mounting instructions at:
http://support.automation.siemens.com/WW/view/en/17738210/133300
Motion detector tops
• The motion detector top responds to heat motions and initiates a switching
operation
• The lighting remains switched on as long as the motion detector top detects
movement, otherwise it is switched off after the fixed delay time of approx.
2 min
• The lighting is only switched on again after a locking time of 3 s
• Depending on technical requirements (relay, triac or extension unit insert),
the motion detector top is operated in combination with a motion detector
insert
• The sensing range can be extended if
combined with a motion detector
extension unit insert
• 2 different versions are avail
able, depending on the required mounting
height (1.10 or 2.20 m)
• Thanks to their modular design, tops and inserts can be freely comb
ined
• The sensing range of a center unit can be extended by connecting a
maximum of 10 motion detector extension units
• The number of connectable passive extension units is unlimited (e.g. push-
button, 1 NO contact, 5TD2 120)
• The sensitivity is infinitely adjustable between 20 and 100 %
Inserts Section Page
• Motion detector relay inserts Functions / Motion
Detectors
10/2
• Motion detector triac inserts
dto. 10/2
• Motion detector extension unit inserts
dto. 10/3
Technical specifications
• Sensing angle Approx. 180°
• Mounting height
1.10 m/2.20 m (depending on the
version)
• Sensing field
- 1.10 m lens approx. 12 m x 12 m
- 2.20 m lens approx. 12 m x 12 m
• Number of lenses/ lens levels
- 1.10 m lens 18 / 2
- 2.20 m lens 26 / 3
• Rated voltage flush-mounting inserts 230 V AC, 50 Hz
• Operating temperature Approx. –20 ... +45 °C
• Delay time, permanently set Approx. 2 min
• Locking time after switch-off Approx. 3 s
• Brightness threshold value Approx. 0 ... 80 lux / day mode
• Sensitivity Approx. 20 … 100 %
• Number of extension units at the
flush-mounting insert
- Motion detector extension units Max. 10
- Mechanical pushbuttons
(without glow lamps)
Unlimited
5TC15040AM
5TC15040CM