User Manual

2/24
Siemens ET D1 · 2018/2019
i-system
Motion detectors
2
Version Order No.
5TC1505 (front view)
5TC150. (rear view)
Versions
• Mounting height 1.10 m
5TC1505
- Electrical white (RAL 1013) 5TC1530
• Mounting height 2.20 m
- T itanium white (similar to RAL 9010)
-
T itanium white (similar to RAL 9010)
5TC1506
- Aluminum metallic (similar to RAL 9006) 5TC15050AM
- Aluminum metallic (similar to RAL 9006)
- Carbon metallic (similar to RAL 7016)
- Carbon metallic (similar to RAL 7016)
5TC1500
5TC1501
5TC1502
Comfort motion detector tops
same as motion detector top, plus:
• The Comfort motion detector top can also be set to short-time duty
• This way it is possible, for example, to control acoustic signal transducers
(bells) for the monitoring of an entry door
• The operating mode (continuous OFF/automatic/continuous ON) can be
selected by means of a slide switch which can also be secured in the auto-
matic position
• The delay time can be infinitely adjusted between 10 s and 30 min
Inserts Section Page
• Motion detector relay inserts Functions / Motion
Detectors
10/2
• Motion detector triac inserts dto. 10/2
• Motion detector extension unit inserts dto. 10/3
Technical specifications
• Sensing angle Approx. 180°
• Mounting height 1.10 m / 2.20 m (depending on the
version)
• Sensing field
- 1.10 m lens approx. 12 m x 12 m
- 2.20 m lens approx. 12 m x 12 m
• Number of lenses/ lens levels
- 1.10 m lens 18 / 2
- 2.20 m lens 26 / 3
• Rated voltage flush-mounting inserts 230 V AC, 50 Hz
• Operating temperature Approx. –20 … +45 °C
• Delay time Approx. 10 s ... 30 min
• Locking time after switch-off Approx. 3 s
• Brightness threshold value Approx. 0 ... 80 lux / day mode
• Sensitivity Approx. 20 … 100 %
• Number of extension units at the
flush-mounting insert
- Motion detector extension units Max. 10
- Mechanical pushbuttons
(without glow lamps)
Unlimited
5TC15060AM
5TC15050CM
5TC15060CM