User Manual

5/14
Siemens ET D1 · 2018/2019
DELTA profil
Shutter/blind controls
5
Version Order No.
5TC1520
Shutter/blind controls
• In i-system design
• For controlling a blind or shutter motor with mechanical or electronic
limit switches
• Operation is by means of 4 control buttons
Versions
• Titanium white (similar to RAL 9010) 5TC1520
• Silver or aluminum metallic (similar to RAL 9006) 5TC1522
Note Section Page
• Cutout frames must be ordered
separately, see ...
Frames 5/5
• The following intermediate frames,
for inserting devices with cover plate
55 mm x 55 mm must be ordered
separately:
- Titanium white (similar to RAL 9010) Frames 5/5 5TG1893
- Silver or aluminum metallic
(similar to RAL 9006)
dto. 5/5 5TG1762
Note
Download the operating and mounting instructions from:
http://support.automation.siemens.com/ww/view/en/5tc1520/all
Product features
• Flush-mounting device without an extension unit input
• 230 V AC, 50 Hz (N conductor required)
• For screw and claw fixing
• Type of connection: screw terminals
• 2 relays which are electrically interlocked against each other with a
minimum switchover time of approx. 1 s
• Bridging of voltage interruptions < 0.2 s
• Connected load: max. 1 motor up to 1000 W
• Pulse duration: approx. 2 min
• Accuracy: ± 1 min per month
• Reserve power: > 6 h
• Switching times: max. 4 (in 2 blocks: Mo ... Fr / Sa ... Su)
• Factory preset switching times for faster commissioning
• Possible reset to factory settings
• Manual operation possible at any time
5TC1521
5TC1521
5TC1523
5TC1526
5TG1893
5TG1762
Comfort shutter/blind controls
• In i-system design
• For controlling a blind or shutter motor with mechanical or electronic
limit switches
• With comprehensive functionality (see the product features)
• Menu-controlled operation by means of 4 control buttons
Versions
)0109 LAR ot ralimis( etihw muinatiT•
)6009 LAR ot ralimis( cillatem munimula ro revliS•
Note Section Page
• The sun sensor must be ordered
separately, see ...
Accessories and spare
parts
5/27
• Cutout frames must be ordered
separately, see ...
Frames 5/5
• The following intermediate frames,
for inserting devices with cover plate
55 mm x 55 mm must be ordered
separately:
- Titanium white (similar to RAL 9010) Frames 5/5
- Silver or aluminum metallic
(similar to RAL 9006)
dto. 5/5
Note
Download the operating and mounting instructions from:
http://support.automation.siemens.com/ww/view/en/5tc1521/all