User Manual

5/18
Siemens ET D1 · 2018/2019
5
DELTA profil
Motion detectors
Version Order No.
Selection and ordering data
5TC1503 (front view)
5TC1503 (rear view)
5TC1503
5TC1504
5TC1500
5TC1501
5TC1502
5TG1893
General information
• Size of tops: 55 mm x 55 mm
• Degree of protection: IP20
Motion detector tops
• In i-system design
• The motion detector top responds to heat motions and initiates a switching
operation
• The lighting remains switched on as long as the motion detector top detects
movement, otherwise it is switched off after the fixed delay time of approx.
2 min
• The lighting is only switched on again after a locking time of 3 s
• Depending on technical requirements (relay, triac or extension unit insert),
the motion detector top is operated in combin
ation with a motion detector
insert
• The sensing range can be extend
ed if combined with a motion detector ex-
tension unit insert
• 2 different versions are available, depending on the required mounting
height (1.10 or 2.20 m)
• Thanks to their modular design, tops and inserts can be freely comb
ined
• The sensing range of a center unit can be extended by connecting a max-
imum of 10 motion detector extension units
• The number of connectable passive extension units is unlimited (e.g. push-
button, 1 NO contact, 5TD2 120)
• The sensitivity is infinitely adjustable be
tween 20 and 100 %
Versions
• Mounting height 1.10 m
)0109 LAR ot ralimis( etihw muinatiT-
• Mounting height 2.20 m
)0109 LAR ot ralimis( etihw muinatiT-
Inserts Section Page
• Motion detector relay inserts Functions / Motion Detec-
tors
10/2
• Motion detector triac inserts dto. 10/2
• Motion detector extension unit
inserts
dto. 10/3
Note Section Page
• Cutout frames must be ordered
separately, see ...
Frames 5/5
• The following intermediate frames,
55 mm x 55 mm, must be ordered
separately:
- Titanium white (similar to RAL 9010)
F
dto.
rames
5/5
Note
Download the operating and mounting instructions from:
http://support.automation.siemens.com/ww/view/en/5tc1503/all
Technical specifications
• Sensing angle Approx. 180°
• Mounting height 1.10 m / 2.20 m (depending on the
version)
• Sensing field
- 1.10 m lens Approx. 12 m x 12 m
- 2.20 m lens Approx. 12 m x 12 m
• Number of lenses/ lens levels
- 1.10 m lens 18 / 2
- 2.20 m lens 26 / 3
• Rated voltage flush-mounting inserts 230 V AC, 50 Hz
• Operating temperature Approx. -20 ... +45 °C
• Delay time, permanently set Approx. 2 min
• Locking time after switch-off Approx. 3 s
• Brightness threshold value Approx. 0 ... 80 lux / day mode
• Sensitivity Approx. 20 ... 100 %
• Number of extension units at the
flush-mounting insert
- Motion detector extension units Max. 10
- Mechanical pushbuttons Unlimited
5TG1762 - Silver or aluminum metallic
(similar to RAL 9006)
5/5