User Manual
5/19
Siemens ET D1 · 2018/2019
DELTA profil
Motion detectors
5
Version Order No.
5TC1505 (front view)
5TC1505 (rear view)
5TC1505
5TC1506
5TC1500
5TC1501
5TC1502
5TG1893
Comfort motion detector tops
same as motion detector top, plus:
• The Comfort motion detector top can also be set to short-time duty; this way
it is possible, for example, to control acoustic signal transducers (bells) for
the monitoring of an entry door
• The operating mode (continuous OFF/automatic/continuous ON) can be se-
lected by means of a slide switch which can also be secured in the auto-
matic position
• The delay time can be infinitely adj
usted between 10 s and 30 min
Versions
• Mounting height 1.10 m
)0109 LAR ot ralimis( etihw muinatiT-
• Mounting height 2.20 m
)0109 LAR ot ralimis( etihw muinatiT-
Inserts Section Page
• Motion detector relay inserts Functions / Motion Detec-
tors
10/2
• Motion detector triac inserts dto.
10/2
• Motion detector extension unit in-
serts
dto.
10/3
Note Section Page
• Cutout frames must be ordered
separately, see ...
Frames
5/5
• The following intermediate frames,
55 mm x 55 mm, must be ordered
separately:
- Titanium white (similar to RAL 9010) Frames
5/5
Note
Download the operating and mounting instructions from:
http://support.automation.siemens.com/ww/view/en/5tc1505/all
Technical specifications
• Sensing angle Approx. 180°
• Mounting height 1.10 m / 2.20 m (depending on the
version)
• Sensing field
- 1.10 m lens Approx. 12 m x 12 m
- 2.20 m lens Approx. 12 m x 12 m
• Number of lenses/ lens levels
- 1.10 m lens 18 / 2
- 2.20 m lens 26 / 3
• Rated voltage flush-mounting inserts 230 V AC, 50 Hz
• Operating temperature Approx. -20 ... +45 °C
• Delay time Approx. 10 s ... 30 min
• Locking time after switch-off Approx. 3 s
• Brightness threshold value Approx. 0 ... 80 lux / day mode
• Sensitivity Approx. 20 ... 100 %
• Number of extension units at the
flush-mounting insert
- Motion detector extension units Max. 10
- Mechanical pushbuttons Unlimited
dto.
5TG1762
- Silver or aluminum metallic
(similar to RAL 9006)
5/5