Owner's manual

en
20
Safety and warning
information
Before you put the appliance
into operation
Carefully read through the instructions
for use and assembly instructions. They
contain important information on setting
up, using and maintaining the appliance.
The manufacturer is not liable for any
damage caused by users ignoring the
information and warnings contained in
the instructions for use.
Retain all documents for later use or for
subsequent owners.
Technical safety
The appliance contains a small quantity
of the environmentally-friendly, though
flammable, refrigerant R600a. Make sure
that the pipes of the refrigerant circuit
are not damaged during transport or
installation. If refrigerant shoots out, it
may ignite or cause eye injuries.
In the event of damage:
n Keep open flames or sources of
ignition away from the appliance.
n Switch off the appliance and unplug it
from the mains.
n Ventilate the room well for a few
minutes.
n Inform the after-sales service.
The more refrigerant an appliance
contains, the larger the room must be in
which it stands. If there is a leak and the
room is too small, a flammable gas-air
mixture may form.
The room must be at least 1 m
3
in size
for each 8 g of refrigerant. The volume
of refrigerant in your appliance is listed
on the rating plate inside the appliance.
If the mains connection cable for this
appliance is damaged, it must be
replaced by the manufacturer, the
after-sales department or a similarly
qualified person. Incorrect installations
and repairs may put the user at
considerable risk.
Repairs must only be carried out by the
manufacturer, after-sales service, or a
similarly qualified person.
Only original parts from the
manufacturer must be used. The
manufacturer can only guarantee that
the safety requirements are met if these
parts are used.
A mains cable extension lead must only
be procured from the after-sales service.