Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslIVZ.fm / 02.07.2008 Contents Schablone 2005_07_27 Contents The Giga762SX WLAN dsl . . . . . . . . . . . . . . . . . . . . . 7 Do your part for the environment (ECO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Local area networks with Gigaset products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Wired local area network (Ethernet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslIVZ.fm / 02.07.2008 Contents Schablone 2005_07_27 Basic Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Regional Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuring Internet connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslIVZ.fm / 02.07.2008 Schablone 2005_07_27 Contents USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . File Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print Server . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslIVZ.fm / 02.07.2008 Schablone 2005_07_27 Contents Using the data on a USB mass storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checking network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Share Inter Process Communication for the network . . . . . . . . . . . . . . . . . . . . . Starting the computer browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Schablone 2005_07_27 The Giga762SX WLAN dsl The Siemens Giga762SX WLAN dsl is a powerful but simple communications device for connecting your PC or local area network (LAN) to the Internet (via DSL). It contains an integrated ADSL modem (ADSL /ADSL2+) enabling you to access the Internet easily.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 Schablone 2005_07_27 The Giga762SX WLAN dsl The Giga762SX WLAN dsl has an extensive range of functions but remains simple to use. It can be configured and operational within a few minutes. Note: This user guide is based on the software release 2.3.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Schablone 2005_07_27 Local area networks with Gigaset products You can use the Siemens Giga762SX WLAN dsl to set up a local area network, for example a home network. All PCs in this network can communicate with each other and have access to the Internet.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Schablone 2005_07_27 Wired local area network (Ethernet) In a wired local area network, PCs communicate with one another via an Ethernet cable. When the Siemens Giga762SX WLAN dsl is used, it establishes the connection between the PCs. For this it has four Ethernet LAN ports for connecting four PCs. The PCs have to be equipped with a network port (Ethernet). New PCs frequently already have this port.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Schablone 2005_07_27 Wireless local area network (WLAN) In a wireless local area network (WLAN), PCs are linked without wires or cables. The PCs have to be equipped with a wireless local area network adapter (WLAN adapter), for example a Gigaset USB Adapter 54.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 Linking wireless networks with the Internet The Giga762SX WLAN dsl has an ADSL interface that permits all stations within its local area network to access the Internet simultaneously. To be able to use this functionality, you need a DSL connection obtainable from an Internet service provider. Find out whether your service provider supports parallel access by several PCs.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Wireless local area networks can work easily together with existing Ethernet networks. If you wish to connect mobile stations to an existing wired network, you must group together all mobile stations into a wireless local area network in infrastructure mode.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Using the Gigaset WLAN Repeater, you can extend your wireless network's coverage. Set it up within the range of your network. The repeater will now transmit data traffic into its own wireless area. This technology allows you to set up wireless networks that cover a much larger area than is possible with a single Giga762SX WLAN dsl.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 Schablone 2005_07_27 The Giga762SX WLAN dsl Internet Fixed network You can choose whether to connect any two analogue phones, a fax machine or an answering machine to the phone ports. You can configure these ports using the Giga762SX WLAN dsl. The PABX of the Giga762SX WLAN dsl allows you to connect wireless SIP phones (WLAN handsets) and PCs with SIP clients (software for Internet telephony) as extensions.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Schablone 2005_07_27 WPS provides two possibilities for registration: u Via registration button The access point (e.g. the Giga762SX WLAN dsl) has a registration button. The registration button is available either: – as hardware: a specific button (labelled Scan) is provided on the device’s back panel. – as software: registration can be started via the WPS Registration page of the user interface.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 Schablone 2005_07_27 The Giga762SX WLAN dsl Further information you will find in chapter "Starting WPS registration and configuring WPS" on page 87. Access Point Repeater or WLAN network adapter Registering ((( SSID and pre-shared key Generating the PIN via configuration user interface Entering and activating the PIN via configuration user interface WLAN adapters without WPS can also be set up manually, i.e.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 Schablone 2005_07_27 The Giga762SX WLAN dsl server or printer. You can connect a USB hard disk or a printer to the USB interface of the Giga762SX WLAN dsl and make them available to all users in your network. The Giga762SX WLAN dsl supports DHCP for dynamic IP configuration of the local area network, and DNS for domain name mapping.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / introduction.fm / 02.07.2008 The Giga762SX WLAN dsl Schablone 2005_07_27 u Offering your own services on the Internet – If you want to offer your own services on the Internet, you can set up the Giga762SX WLAN dsl as a virtual server without permitting further access to the local area network. – DMZ (Exposed Host) This allows you to release a PC in your local area network for unlimited access from the Internet.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 c First steps System requirements You require the following components to operate your Giga762SX WLAN dsl: u A PC with – an 802.11g or 802.11b compatible wireless Network adapter. Note: An 802.11b-compatible network adapter has a maximum transmission speed of 11 Mbps. An 802.11g-compatible network adapter has a maximum transmission speed of 54 Mbps.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 Schablone 2005_07_27 First steps For experienced users The default settings for the Giga762SX WLAN dsl are: – IP address: 10.0.0.2 – Subnet mask: 255.255.255.0 – SSID: individually preset, see the label on the devices bottom Caution: The Giga762SX WLAN dsl is delivered with a preset individual encryption (WPA2-PSK/ WPA-PSK with pre-shared key). You will find the key at the label on the devices bottom.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 Schablone 2005_07_27 First steps 7. If you want to use the Giga762SX WLAN dsl for Internet telephony, you must configure your VoIP provider's registration data (refer to the section entitled "Setting up Internet telephony (VoIP)" on page 98). 8. If you wish to use other functions of the Giga762SX WLAN dsl, for example the comprehensive security features, use the Security Setup (page 50) or the Advanced Setup (page 60).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 LED State Status On Line Online USB LAN1 – LAN4 WLAN VoIP One of the connected phones' receivers has been lifted for a call (fixed network telephony). Flashing The phone is ringing and a fixed network call is being received or someone is waiting on the line. Off There is currently no fixed network connection. On Connection to the Internet has been established.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 LED State Status On The receiver of the phone connected to the port has been lifted. The phone is ringing and a call is being received or a call is being conducted. No phone is connected or the connection is idle. Phone 1/ Flashing Phone 2 Off The Giga762SX WLAN dsl can be set up in any suitable location in the home or office. You do not need any special wiring.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting and activating the Giga762SX WLAN dsl Ports on the rear panel The rear panel of the Giga762SX WLAN dsl houses the ports. Element Description PWR Socket for the mains adapter supplied Warning: Using the wrong power supply unit may damage the Giga762SX WLAN dsl. Scan USB Depending on the device variant, there may be an on/off button beside the PWR port. Button for WPS activation.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 Schablone 2005_07_27 First steps Element Description LAN1 – LAN4/WAN (yellow) Four 10/100 Mbps switch ports with automatic recognition (RJ-45). You can connect up to four devices with Ethernet ports (such as PCs, a Hub or Switch). ADSL (black) Line (green) Phone1/2 You can connect an external modem (e.g. a VDSL or cable modem) to the LAN4 port. The integrated ADSL modem is then deactivated.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting to the splitter data port You can operate the Giga762SX WLAN dsl in two different operating modes in order to set up an Internet connection: – with an integrated ADSL modem – with an external modem, such as a VDSL or cable modem Using the integrated ADSL modem ì Connect the ADSL port (black) on the Giga762SX WLAN dsl to the ADSL socket on the splitter.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Using an external modem ì Connect the LAN4/WAN port on the Giga762SX WLAN dsl with an external modem. To do this, use the cable supplied (black). ì Then connect this modem to the relevant communications port (e.g. splitter).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting to the analogue phone port To make conventional calls via the fixed network, you must connect your Giga762SX WLAN dsl with the phone port of the splitter. ì Connect the Giga762SX WLAN dsl with the splitter as follows: – Insert one plug of the telephone cable supplied (green) into the Line port (green) on the Giga762SX WLAN dsl.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting to the phone ì Connect the Giga762SX WLAN dsl with the analogue phone as follows: – Insert the plug of the telephone into the Phone 1 or Phone 2 port on the Giga762SX WLAN dsl. Note: In the event of power failure you cannot make a VoIP call. In this case all outgoing calls are directed to the PSTN line via the analog line.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting wired to the PC You can connect wired or wireless PCs to your Giga762SX WLAN dsl to create a local area network (LAN). Wireless connection is possible after connecting the Giga762SX WLAN dsl to the power supply (see page 32). First connect just one PC to the Giga762SX WLAN dsl, wired connection is recommended. You can then carry out the general configuration.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting to the mains power supply Please remember: Only use the mains adapter supplied with the device (12V 1.5A DC). ì Connect the mains adapter cable to the PWR socket on the Giga762SX WLAN dsl. ì Plug the mains adapter into a mains socket. ì If your device has an on/off button, switch on the device. The Giga762SX WLAN dsl is now switched on and ready for operation.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting wireless to the PC Wireless via WPS If you are using WPS (see page 15), you can easily make a wireless connection to other WLAN devices via the Scan (registration) button. ì Press the registration button (Scan) for at least two seconds on the device’s back panel or activate the corresponding function in the user interface to start WPS registration (see page 87).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 ì Choose the encryption method WPA2-PSK/ WPA-PSK in the configuration settings of your network adapter and enter the pre-shared key of you Giga762SX WLAN dsl. If one of your network adapters do not provide this encryption method, you must change the encryption method at the Giga762SX WLAN dsl (see page 88) and then configure the encryption appropriatly for all network adapters.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Network configuration of the PCs In order to communicate via the Giga762SX WLAN dsl, the network configuration may have to be set up on the connected PCs. With u Windows Vista or u Windows XP or u Windows 2000 operating systems, this usually takes place automatically provided you have not made any changes to the standard settings for the network configuration.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / device.fm / 02.07.2008 First steps Schablone 2005_07_27 Connecting and configuring additional PCs (optional) Once you have configured one PC as described above you can connect additional PCs to the Giga762SX WLAN dsl. You will need an additional cable for each PC you want to connect via cable. For the wireless connection of additional PCs, you will need a wireless network adapter.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 The user interface Schablone 2005_07_27 The user interface You have connected a PC to the Giga762SX WLAN dsl and possibly made the settings in the local area network. You can now configure the Giga762SX WLAN dsl using this PC from the user interface of the Giga762SX WLAN dsl. We recommend for initial configuration that you connect the PC in wired mode. As Internet browser we recommend Microsoft Internet Explorer V 6.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 The user interface Schablone 2005_07_27 ì Click OK. Note: For security reasons you should change this password at a later stage (page 52). A page with security information will appear. You can skip this when configuring the device for the first time. If you carry out all the general and security settings using the wizard as described below, your device and network will be fully protected.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 The user interface Schablone 2005_07_27 The configuration program comprises the following functions: Basic Setup Wizard Use this wizard to make the settings required for connecting to the Internet. You can set up data for your region, make settings for your wireless and wired local network (including WPS registration) and configure Internet telephony. This is described from page 42.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 The user interface Schablone 2005_07_27 Selecting a language The user interface can be presented in various languages. ì Click Language at the top right of the start screen. ì If you wish to change the preset language, select the new language you require from the list. ì Click OK to apply the setting. Once the procedure has been concluded, the start screen will be displayed again.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 The user interface Schablone 2005_07_27 Elements in the user interface The user interface screens contain the following elements: Button Log Off The Log Off button is always displayed on the right of the user interface. If you click Log Off, the session is ended and the login screen appears again. Help Click the question mark to display explanations about the current user interface screen.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Basic Setup Wizard Schablone 2005_07_27 Basic Setup Wizard The Basic Setup Wizard wizard guides you step by step through the general configuration of the Giga762SX WLAN dsl. This includes settings for your region and your Internet access. Connection to the Internet is established via the Giga762SX WLAN dsl for all PCs connected to it. You need your Internet service provider's access data for the configuration.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Basic Setup Wizard Schablone 2005_07_27 Regional Options You can select your present location for the regional settings on this screen. ì Select the country in which you are currently located from the list. You can set the time so that it automatically switches to summer time and/or another time zone of your choice. ì Select the required option and/or the time zone for your location. ì Click Next >.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Basic Setup Wizard Schablone 2005_07_27 Configuring Internet connections You will find the access data you require for configuring the Internet connection in the documentation you received from your Internet service provider (ISP). You can perform the initial configuration of your Internet connection on this screen. If you want to change the data later on, you can do this in the Advanced Settings (page 61) menu.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Basic Setup Wizard Note: Connection to the Internet is only possible if you have entered all the data for your Internet service provider correctly. ì Your Internet service provider may disconnect and reconnect your Internet connection daily. In this case enable 24h reconnection and choose the period of time in which the reconnection should be performed from the Reconnection time option menu.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Basic Setup Wizard PPPoE pass-through This option is only available if you have chosen another Protocol than PPPoE. PPPoE pass-through allows you to use an additional Internet connection (through another service provider) on one PC. Further information about this can be found on page 66. ì Deactivate PPPoE pass-through if you do not wish to use this function. ì After entering the data click Next >.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Basic Setup Wizard Schablone 2005_07_27 Telephony You will find the access data you require for configuring Internet telephony (VoIP) in the documentation you received from your service provider. ì Select the option On for VoIP account if you wish to use Internet telephony (default setting).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Basic Setup Wizard Schablone 2005_07_27 ì Select Other from the Service provider selection menu (default setting) or, if required, use one of the suggested providers from the list. Enter the data you have received from your service provider: User name, Displayed name, Authorization user name, Password, SIP domain, SIP realm, Proxy server address and Registrar server address.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Basic Setup Wizard ì Click Register to start WPS registration. This function corresponds to pressing the Scan button on the device’s back panel. Once WPS registration is activated, the device searches for a WPS client within range.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 Summary The basic settings you have made through the wizard are shown in the next step for you to check. ì If you want to change the settings, click < Back. ì If you want to confirm the settings, click Finish to close the Basic Setup Wizard. The Giga762SX WLAN dsl is now configured and ready to connect to the Internet. The Security Setup Wizard then opens automatically.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Security Setup Wizard When using WPS please note the following: Your Giga762SX WLAN dsl is equipped with WPS (Wi-Fi Protected Setup). You can use it to set the security of your wireless network easily with one click only (see page 15). If no manual configuration of security data has been performed before, with the WPS registration the preset SSID and pre-shared key (WPA2-PSK/WPA-PSK) are used.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 Assigning a password In the first step of the configuration you can change the password for the user interface. When the device is supplied, the configuration of your Giga762SX WLAN dsl is protected with the admin password. To prevent unauthorised changes to the configuration, you should change the password at regular intervals.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 SSID For the wireless network components to be able to communicate with one another, you must use the same SSID (Service Set Identifier). The default SSID for the Giga762SX WLAN dsl is shown at the label on the bottom of the device. For security reasons you can change this SSID and deactivate SSID broadcast.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 Setting up security functions for the wireless network Wireless networks are even more susceptible to eavesdropping than wired networks. With conventional network adapters, an intruder only needs a device with a WLAN adapter (e.g.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Security Setup Wizard WPA-PSK is a special WPA mode for private users and users in small companies without their own authentication server. After a certain period of time (Rekey interval), encryption keys are automatically generated with the pre-shared key, automatically changed ("rekeying") and authenticated between the devices.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 WEP encryption WEP (Wired Equivalent Privacy) is an encryption for radio signals in wireless networks and meets the IEEE 802.11 standard. If you transmit data wirelessly and not all components in your wireless network support the higher security standard WPA (page 55), we recommend that you activate WEP Encryption.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 ì Confirm the key by entering it again in the Confirm key field. Generating a key by means of a Passphrase ì Enter a Passphrase (up to 32 characters) and confirm it by entering it again. The key is generated automatically. Note: u It is very important that you make a note of the key or passphrase.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Security Setup Wizard Schablone 2005_07_27 Access control within the wireless network In this step you can specify which PCs will have wireless access to the Giga762SX WLAN dsl and hence to the LAN. Access control is based on the MAC address of the PC network adapters. You can enter the MAC addresses for the PCs manually or select these from the list of PCs that are currently logged in.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Security Setup Wizard Note: If you activate MAC access control, you must at least add the PC on which you are configuring the Giga762SX WLAN dsl to the list. Otherwise, you will have no access to the user interface and will receive an appropriate error message. WPS registration is only possible for PCs in the list if you have activated MAC access control.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Note: If you have changes the encyption setting, you must now configure the WEP or WPA key for the wireless network adapter of the PC that has been configured with other values. After this you can again wirelessly log on to the Giga762SX WLAN dsl. Configuring Advanced Settings In the Advanced Settings menu, you can configure all the options for the Giga762SX WLAN dsl.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Internet If you have configured the Giga762SX WLAN dsl using the two wizards, you have also configured the WAN connection (Internet access). You can check or change these settings in the Internet menu.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Internet selection You can activate or deactivate the Internet connection for the Giga762SX WLAN dsl on this screen. You can choose the connection type and set up and edit a number of connection services. ì In the Advanced Settings menu, select: Internet ì Select the appropriate option to activate or deactivate the Internet function of the Giga762SX WLAN dsl.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì For an ADSL connection, make the following settings: – Enter the values for VPI / VCI for each connection service that you have received from your Internet service provider. – Enter a description to identify the respective connection service. – Click Add to create a new entry. – Click Delete to delete an entry. – Click OK to save and apply the changes.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Internet Connection You can set up or change the configuration of your Internet connection on this screen. All the settings you make here must coincide with the features your Internet service provider makes available to you. False information can lead to problems with your Internet connection.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Enter the data you have been given by your service provider: Protocol, User name, Password. Only if you have selected PPPoE as the protocol and if you want to set up a number of connection services with this protocol: ì Enter the name of the connection given to you by your service provider in the Access concentrator name field.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì You can show additional settings, depending on the selected service provider, by means of the Show Additional Settings button. You can also change the settings, if required. These settings are pre-set with appropriate default values. This button is not available for the Other selection since all available settings are displayed in this case.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Click OK to apply the settings. DNS server DNS is a decentralised service that assigns PC names or Internet addresses (Domain names) and IP addresses to one another. A DNS server has to administer this information for each server or each LAN with an Internet connection.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 MAC Address If you already had Internet access through the same Internet service provider before connecting the Giga762SX WLAN dsl, it is possible that the MAC address of one of your PCs was used for registration when the connection was being set up.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings – Use custom MAC address: Select this option if you have asked your Internet service provider to register a new MAC address and this is not the MAC address of the PC on which you are currently carrying out the configuration. ì Click OK to apply the settings.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Attack Detection If the firewall functions of the Giga762SX WLAN dsl are activated, the device monitors and limits access to incoming data traffic via the DSL connection with a function called "Stateful Packet Inspection" (SPI). This allows the Giga762SX WLAN dsl to detect and prevent certain types of attack from the Internet, such as Denial-of-Service (DoS).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Setting up access control to the Internet The Access Control function allows you to block access to various services for one or more PCs. You can permit or block access to services at certain times. ì In the Advanced Settings menu, select: Internet – Firewall – Access Control ì Activate the Access Control function by selecting On.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Select the Access rule type from the list: – Apply to all clients: The rule applies to all PCs in the network. – Specify IP address or Specify MAC address: The rule applies to a PC you have selected via the IP address or MAC address. ì Enter a name for the Comment for the access rule. ì Define the Access level.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Setting up the NAT function The Giga762SX WLAN dsl comes equipped with the NAT (Network Address Translation) function. With address mapping, several users in the local network can access the Internet via one or more public IP addresses. All the local IP addresses are assigned to the router's public IP address by default.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Note: u An application that is configured for port triggering can only be run by one user in the local network at a time. u As long as the public ports are open, they can be used by unauthorised persons to gain access to a PC in the local network. When the Giga762SX WLAN dsl is supplied, the NAT function (Network Address Translation) is activated, i.e.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Select the required option. Port Triggering If you configure port triggering for a certain application, you must identify a trigger port and the protocol (TCP or UDP) this port uses. You can then assign the public ports that must be opened for the application and this trigger port.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Select the required application from the Predefined applications list. ì Click the Add button. The data for the required service is entered on the screen. ì Select the chekbox in the Enabled column.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Internet services are addressed via defined port numbers. The Giga762SX WLAN dsl needs a mapping table of the port numbers to redirect the service requests to the servers that actually provide the service. Port Forwarding has been configured for this purpose.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 You can use – – – – a single port number, several port numbers separated by commas, port blocks consisting of two port numbers separated by a dash, or any combination of these (for example 80,90-140,180). ì In the Local port field, enter the internal port number to which service requests are to be forwarded. You can only specify one port number here.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings ì In the Advanced Settings menu, select: Internet – Address Translation (NAT) – Schablone 2005_07_27 Exposed Host ì ì ì ì Enter the Local IP address of the PC that is to be enabled as an Exposed Host. Enter a name for the PC in the Comment field. Activate Enabled by ticking the check box. Click the Add button to add the entry to the list.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings One possible service is DynDNS.org (http://www.DynDNS.org). If you have activated the device's DynDNS function, it will monitor its public IP address. When this changes, the device will open a connection to DynDNS.org and update its IP address there. Note: You must have an account with the service you have chosen (e.g. DynDNS.org) before you can use the DynDNS function.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Routing Your Internet service provider can permit you to set up a number of connection services. The entire data traffic between your local network and the Internet uses the first connection service (route) by default.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 LAN configuration You can use the LAN configuration to define an IP address for the Giga762SX WLAN dsl and configure the DHCP server. ì In the Advanced Settings menu, select: Local Network Defining the private IP address for the Giga762SX WLAN dsl On this screen you can change the device's IP address. The preset IP address is 10.0.0.2.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings We recommend that you use an address from a block that is reserved for private use. This address block is 10.0.0.1 to 10.255.255.254. ì Adjust the Subnet mask if necessary. The Subnet mask specifies how many address parts of the IP address must be identical for all network components (including routers).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Your Internet service provider will usually provide you with a DNS server that makes this assignment when an Internet connection is set up. If necessary, you can manually define the DNS server to be used for the Internet connections. ì Enter the IP addresses for your preferred DNS servers (Preferred DNS server and Alternate DNS server).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Configuring wireless connections If you have implemented wireless PC communication via the Giga762SX WLAN dsl, you should improve the security of your wireless network via the Advanced Settings – Wireless Network menu.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Channel All clients in the network use the set radio channel for wireless data transfer. You can choose between various channels, depending on your current location. ì Select Automatic so that the best channel for transmitting the data is used automatically.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Sending power ì Select the required sending power for your device. It is recommended that you select a sending power with a range to suit the spatial environment of your local network. A much greater range makes it easier to eavesdrop on your wireless data transfer. ì Click OK to apply the settings.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 receives the Giga762SX WLAN dsl security data (SSID and pre-shared key) and is thereby registered. The registration progress is shown in the window. You can also follow the registration process via the LED display (see page 33). If more than one client tries to register within the two minutes, an error message is displayed.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings WPA with a pre-shared key (WPA-PSK) WPA-PSK is a special WPA mode for private users and users in small companies without their own authentication server. After a certain period of time (Rekey interval), encryption keys are automatically generated with the pre-shared key, automatically changed ("rekeying") and authenticated between the devices.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Select the required option in the Security field. ì Enter the IP address of the RADIUS server in the RADIUS server IP address field. ì Enter the port of the RADIUS server in the RADIUS server port field. ì In the RADIUS server secret key field, enter a keyword that conforms to the conventions of the RADIUS servers that the server is to use for authentication.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 WEP encryption If WPA is not supported by all components in your wireless network, we recommend that you activate WEP Encryption on the components. Note: You cannot use WEP together with WPS. ì Choose the WEP option in the Security field. ì Select the Authentication type: – Select Shared to require that each client log in to the network with a specified key.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Select the Input type, i.e. whether the key is to be entered manually or generated automatically by means of a Passphrase. Manual key entry ì Select the Key type, Hex or ASCII. If you select Hex as the key type you can use the characters 0 to 9 and A to F. – With a 64-bit encryption depth, the key is 10 characters long.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Generating a key by means of a Passphrase ì Enter a Passphrase (up to 32 characters) and confirm it by entering it again. The key is generated automatically. ì Click OK to apply the settings.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Permitted clients On this screen you can specify the PCs that are to have wireless access to the Giga762SX WLAN dsl and hence to your LAN and WLAN. The default setting for access control is deactivated. This means that all PCs that use the correct SSID can be logged in. Access control is based on the MAC addresss of the PC network adapters.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Note: If you activate MAC access control, you must at least add the PC on which you are configuring the Giga762SX WLAN dsl to the list. Otherwise, you will have no access to the user interface and will receive an appropriate error message.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings All repeaters/access points in range are displayed with the following information: – SSID – MAC address – Channel – Type (11b or 11g) The Signal strength of the connection to the repeater, if one exists, is shown as a percentage. You can use this data to determine the best possible location for your repeater.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Note: u WDS can only be used with WEP encryption or without encryption. You may have to change the encryption of your wireless network, if applicable. u The encryption settings on the repeater have to correspond to the settings on your Giga762SX WLAN dsl. u The Giga762SX WLAN dsl and the repeaters must use the same channel.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 VoIP settings You will receive the access and configuration data for Internet telephony from your service provider. ì In the Advanced Settings menu, select: Telephony – VoIP ì Select On if you wish to use Internet telephony (default setting).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings – Fixed gain control (input/output): To adjust the volume for call input (hear) or output (speak), simply enter a different value. The value range is -24 to +24. The higher the value, the higher the volume. -24 0 24 qiet normal loud The real value range which can be used depends on your device.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì To set up a new account, select On. ì In the Service provider menu, select the Other option or otherwise select one of the preconfigured providers. ì Enter the data you have received from your service provider: If you choose a preconfigured service provider, the only options are generally User name and Password.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings If you have selected the Other option, enter the data for Displayed name, Authorization user name, SIP domain, SIP realm, Proxy server address and Registrar server address.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì In the Advanced Settings menu, select: Telephony – Extensions Phone connectors The two telephone ports Phone 1 and Phone 2 of the Giga762SX WLAN dsl have the internal phone number *A1 or *A2. ì Click Edit to adapt the settings for an entry (page 104).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Configuring extensions The Extension shows either the selected port of the Giga762SX WLAN dsl (Phone 1 or Phone 2) or the SIP client. The Extension number for the extension is preset and is displayed as a call number. ì Enter a name for identifying the port in the User name field. You can also leave the default setting for Phone 1 and Phone 2.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Select the Call pickup option to have the option to accept all incoming calls on this extension. ì Select Hide own number for outgoing calls (CLIR) if you want to prevent the number of this extension being displayed for outgoing calls. (Only for Phone 1 and Phone 2 ports). Note: Many service providers either do not support this function at all or only unreliably.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Dialing Plans On this screen you can: u Enter your area code, u Define for Internet telephony whether the area code should be automatically dialled, u Specify whether certain phone numbers or prefixes are to be dialled via the Internet or the fixed network, u Enter a call-by-call provider for the fixed network.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Enter the provider's number in the Preselection number field. ì Choose whether you want to use dialling plans. ì In the Phone number field, enter an individual number or also the first digits of phone numbers (e. g. 0800 or a specific area code) for which the dialling plan is to apply.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Click On to activate the Quick Dial option. ì Enter the quick dial number in the Quick Dial field and/or a name or combination of letters in the Vanity field. ì Enter the phone number in the Phone number / user name field. ì Click Add to save the entry. More empty lines will then be added. ì Click OK to confirm the settings.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings Notes: u If you connect a USB hub to the USB port of the Giga762SX WLAN dsl, you can connect and use a USB memory and a USB printer at the same time. u If connecting a device without its own power supply directly to the USB port, please note that the power consumption must not exceed 500 mA. u The Giga762SX WLAN dsl supports USB V 2.0. Devices that support USB V 1.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 Safely Remove Hardware ì Click this button and wait until any connected USB storage device are fully deactivated before disconnecting them from your device. ì Click OK to save the changes.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Enter a User name, a Password, and confirm it in the next line. ì Click OK. The File Server start page is shown again. ì Click Add to define Shared Folders for the Users defined above. ì ì ì ì Enter a name for the new file share. Choose the directory for the share via the Browse button. Enter a comment in the next line. Click OK.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Choose the Access Rights for each user: no access, read-write access, or readonly access. ì Click OK. The File Server start page is shown again. ì You can edit or delete a user by clicking the Edit or Delete button. ì You can edit or delete a file share by clicking the Edit or Delete button. ì Click OK to save your settings.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Connect the USB mass storage device containing the data to be published to the USB port. You can check the status of the connection to the USB device on the Advanced Settings – USB screen.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì You can change the Port via which Internet users can access your data, to mask your data and protect it from unauthorised users, for example. ì Choose the Directory in which the data is stored on the USB mass storage device using the Browse button.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Configuring Advanced Settings Schablone 2005_07_27 ì Enter the name in the Specified user field. Define different user names for the different access type and directory. ì Enter the password for the user and confirm it by entering it again in the field below. The password is case-sensitive. Avoid using proper names and obvious terms. Instead, use upper case and lower case letters, numbers and special characters.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008 Schablone 2005_07_27 Configuring Advanced Settings ì Activate your devices integrated print server. You can set up the connected printer on your PC by using the IP address of the Giga762SX WLAN dsl shown here when configuring the printer. ì Click OK to accept the changes. You will find information on setting up the printer connected to the Giga762SX WLAN dsl in the section entitled "Using the USB port" on page 137.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / telefone.fm / 02.07.2008 Call guide Schablone 2005_07_27 Call guide Your Giga762SX WLAN dsl allows you to make calls via the Internet (VoIP) and your fixed line. A description of how to configure your Giga762SX WLAN dsl for using the telephone functions is provided under "Telephony" on page 47 and "Setting up Internet telephony (VoIP)" on page 98.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / telefone.fm / 02.07.2008 Call guide Schablone 2005_07_27 Toggling telephone calls Key combination Effect R Consultation Phone number R2 Accept call waiting/ toggle between two calls R0 Reject call waiting R1 Terminate one call and return to the waiting call Description Press R to initiate a consultation with another phone number during a call. Dial the desired (internal or external) number for the consultation.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / telefone.fm / 02.07.2008 Call guide Schablone 2005_07_27 Key combination R4 Effect End conference call and set up the connection between call parties End conference call Description If you press R4 during a conference call, you end your call and set up a connection between the other two external call parties. You can then replace the receiver. In the case of an internal conference call, you simply need to hang up.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 Administration The Giga762SX WLAN dsl user interface includes several helpful functions for administration.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 Regional Options For operating your Giga762SX WLAN dsl, you can select the location, time zone and format for entering the time and date, and you can also configure a time server for the Internet time (system time). ì In the Advanced Settings menu, select: Administration – Regional Options ì Select the country you are currently in from the list.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 Internet Time The System time of the device is automatically synchronised with the time server on the Internet. The time of the Last synchronization with time server is displayed for your information. ì If you would like to use your own time server, activate the On option next to the Use custom time servers field.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Schablone 2005_07_27 Administration After installation, the Giga762SX WLAN dsl user interface is protected by the System Password admin. To prevent unauthorised changes being made to the configuration, you should set a new System Password from time to time. You may already have set a System Password when you set up the Security Setup Wizard. If so, you can change it here.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 System management Your Giga762SX WLAN dsl offers you the option of using remote management and phone-based management in addition to the configuration program that you access via a PC in your local network.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 ì You can change the Port via which you can access the configuration program from the Internet, for example in order to mask and protect the configuration program against unauthorised access. ì Access: You can select Read only if you only wish to activate remote management for reading or you can select Full control if you wish to activate it for reading and writing.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 Backing up and restoring a configuration When the Giga762SX WLAN dsl has been configured, it is recommended that you back up the settings. This means you can restore the settings at any time if they are accidentally deleted or overwritten. You can also reset the configuration to the factory settings. You should always do this before handing the device to an external person.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 ì Click OK. The configuration will now be updated. Restoring factory settings You can reset the Giga762SX WLAN dsl to the factory settings. You should do this before making the device available to others or exchanging it through the dealer. Otherwise unauthorised persons may use the Internet access data at your expense.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 System Log The System Log is displayed in the Status – Device menu. It contains important information about how the device functions and possible problems. This information can also be automatically transferred to a system log server. ì In the Advanced Settings menu, select: Administration – System Log ì Log level: Specify how much information is to be contained in the system log.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Administration Schablone 2005_07_27 ì System log server – Activate this function if the device system log is to be automatically transferred to a system log server in the local network. – Server address type Choose if you want to enter the server address as IP address or domain name. – Server address Enter the IP address or the domain name for the system log server.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Status information Schablone 2005_07_27 Status information Information about configuration and the status of the Giga762SX WLAN dsl is displayed in the Status menu of the Giga762SX WLAN dsl. On the first screen you will find an overview of the status of the Internet connection, the local and wireless network, the telephony, the USB interface and the device.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Status information Schablone 2005_07_27 u Registration Button Shows if the registration button (Scan button) on the device’s back panel is enabled or disabled. Telephony u VoIP accounts Shows the number of VoIP accounts and the connection status. USB u Status Status of the USB connection of the device. It can be enabled (On) or disabled (Off).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Schablone 2005_07_27 Status information rity risk is given in the section "Starting WPS registration and configuring WPS" on page 87. u Access to your wireless network not restricted to allowed clients Users can access the wireless network from any PC. Information on how to avoid this security risk is given in the section "Permitted clients" on page 95.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Status information Schablone 2005_07_27 Shows the public MAC address of the device. u Default gateway Shows the IP address of the assigned default gateway. u Preferred DNS server Shows the IP address of the assigned DNS server. u Alternate DNS server Shows the IP address of the alternate DNS server, if available. u Downstream rate Shows the current transmission rate for incoming traffic.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Status information Schablone 2005_07_27 Local Network You will find information about the local network settings on the Local Network screen in the Status menu. In the Status menu, select Local Network: u IP address Shows the local IP address of the device. u Subnet mask Shows the subnet mask used in the local network. u MAC address Shows the local MAC address of the device for wired data transfer.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Status information Schablone 2005_07_27 u Wireless clients Shows all clients in the wireless network that are currently connected to the device. The Host name, MAC address and IP address are specified for identifying each client. You will also see information about the Uptime to date of the current connection for each client in the wireless network.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / admin_router.fm / 02.07.2008 Status information Schablone 2005_07_27 Device You will find the most important device data on the Device screen in the Status menu. In the Status menu, select Device: u System uptime Show's your device's operating time since the last time the system was started. u System time Shows the system time for your device. u Firmware version Shows the firmware version currently installed on your device.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 Using the USB port Your Giga762SX WLAN dsl is equipped with a USB port that can be used, for example, to connect a printer for use as a network printer or a USB mass storage device for use as a file server. This chapter describes which settings you have to define on your computer to use these functions.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port Note: Before starting to set up the printer please make sure that a printer is connected to the USB port of the Giga762SX WLAN dsl and that the printer has been identified. You can check this in the user interface via Advanced Settings – USB – Print Server.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì In the Add Printer Wizard, click the option Add a local printer. ì Select the Create a new port option button. ì Then select Standard TCP/IP Port from the selection menu in the field Type of Port. ì Click Next.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Choose TCPI/IP as Device type. ì In the Host Name or IP Address input field, enter the IP address of the printer server (Giga762SX WLAN dsl): e.g. 192.168.2.1. This entry is transferred into the Port Name field. This name will later appear in the list of printer ports. ì To change the name, click in the Port Name field and enter a name. Name this port, for example, Gigaset_Port.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Select the Custom option and click on Settings. ì ì ì ì Select the LPR option box. For Queue name enter lp0 (lower case: lima, papa, number 0). LPR Byte Counting Enabled should not be selected. Click on OK and then on Next.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 Windows is searching for the appropriate driver model. ì Choose the appropriate driver for your printer and click on Next. After successfully installing the driver you can now define a name for your printer. This is the name which is used to display the printer in the printer list. ì Enter a printer name and select the option Set as the default printer. ì Click Next.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Click the button to print a test page. ì Click Finish. Note: The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does not evaluate any of the printer's response messages. For this reason please make sure that your printer is also only configured uni-directionally.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 Installing a standard TCP/IP printer port under Windows XP/2000 You can use the standard TCP/IP port driver available in this operating system. Make sure that the Giga762SX WLAN dsl is connected and can be reached in the network. A printer need not be connected to the USB port on your Giga762SX WLAN dsl at this point. The following illustrations show installation on Windows XP.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì In the Add Printer Wizard, click Next. The printer port you are installing will behave like an additional parallel port on the PC. For this reason you must click the option button next to Local printer in this window. The Automatically detect and install my Plug and Play printer check box must not be selected. ì Click Next.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Click the Create a new port option button. ì Then select Standard TCP/IP Port from the selection menu in the field next to this option. ì Click Next. ì In the wizard for setting up a standard TCPI/IP port, click Next.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì In the Printer Name or IP Address input field, enter the IP address of the print server (Giga762SX WLAN dsl): e.g. 192.168.2.1. A copy of your entry is displayed in the second field. ì Double-click in the Port Name field and enter a name. This name will appear in the list of printer ports. Name this port, for example, Gigaset_port. ì Click Next.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Enter the following data in the relevant fields: – – – – Printer name or IP address: Enter the IP address of the print server. Protocol Choose the option LPR. Queue name: lp0 (lower case: lima, papa, number 0) LPR Byte Counting Enabled should not be selected. ì Click OK ì Click Next. The window for finishing the wizard is opened and shows you all the settings you have made.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Click Finish. Once the wizard for installing the printer port is finished, the Add Printer Wizard is opened. ì If you wish to install a printer for this port immediately, click Next and follow the instructions of the Add Printer Wizard.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 ì If you do not wish to install a printer until later, click Cancel. Note: The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does not evaluate any of the printer's response messages. For this reason please make sure that your printer is also only configured uni-directionally.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 Instructions for setting up a printer on the PC Once you have installed the printer port you still cannot start printing. The printer port is nothing more than an additional interface on your PC, comparable with the USB port. It means that any printer you install on this port is also regarded as a local printer even though it is located in the network and possibly not directly near you.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 Using the data on a USB mass storage device To view directories and files which are shared via the Giga762SX WLAN dsl file server on the USB port within the Windows network, some parameters on your PC must be set correctly. For most PCs these settings are already defined correctly on delivery, i.e. you usually do not have to do anything.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port The check boxes next to the entries u Internet Protocol Version 4 (TCP/IPv4) and u File and Printer Sharing for Microsoft Networks must be marked. ì If one of these components is not installed it will have to be installed subsequently. You may need your Windows installation CD.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Using the USB port Schablone 2005_07_27 Share Inter Process Communication for the network The Inter Process Communication (IPC) functions are used to interchange data between processes on a computer or between multiple computers in a network. To be able to share data on the USB mass storage device on the Giga762SX WLAN dsl, the IPC must be set to access resources shared in the network (network share).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port ì Click on Start. If an error message appears with a content like "..has been started and then stopped again..", you still have to allow file and printer sharing in the Windows firewall (see next section). Enabling file and printer sharing in the Windows firewall The Windows firewall must be set to allow file and printer sharing. You can check it as follows: ì Open the Control Panel.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008 Schablone 2005_07_27 Using the USB port The File and Printer Sharing entry must be marked. Now your Windows system should be able to access the shared data on the Giga762SX WLAN dsl.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Appendix Schablone 2005_07_27 Appendix Troubleshooting This section describes common problems and their solution. Any problems can be identified from the different LED displays. If you cannot solve the connection problem after checking the LED displays, consult of the following table. Further information is available on the Internet at http://www.siemens.com/gigasetcustomercare.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Schablone 2005_07_27 Appendix Symptom Possible cause and solutions The LAN LED on a connected device does not light up. No LAN connection ì Make sure the connected device is turned on. ì Check whether the Ethernet cable is plugged in. ì Check that you are using the right cable type (CAT5) and that the cable is not too long (<100m). ì Check that the network card on the connected device and the cables are not defective.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Schablone 2005_07_27 Appendix Symptom Possible cause and solutions After a WPS registration attempt, the WLAN LED continues to flash for some time and the required client was not registered. u More than one client has tried to register. ì Repeat registration after a short interval. u MAC access control is activated, but the desired cli- ent is not in the MAC address list.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Schablone 2005_07_27 Appendix Symptom Possible cause and solutions You cannot open a connection to the Giga762SX WLAN dsl from a wireless device. u Either encryption has been activated on the Giga762SX WLAN dsl but not on the wireless network adapter, or an incorrect key is in use. ì Activate the required encryption (WPA-PSK or WEP) on the network adapter with the correct key.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Appendix Schablone 2005_07_27 Symptom The Giga762SX WLAN dsl or other PCs cannot be reached by a PC in the connected LAN using a ping command. Possible cause and solutions ì Make sure that TCP/IP has been installed and configured on all the PCs in the local network. ì Check that the IP addresses have been correctly configured.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Appendix Schablone 2005_07_27 Symptom You cannot conduct VoIP telephone calls. Possible cause and solutions ì The phone or the Giga762SX WLAN dsl is not con- nected properly to the DSL port. Check the cabling and the ports. ì The access data for your VoIP phones is not entered correctly. Check the access data. ì You have not assigned the VoIP phone numbers to the telephone port.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Schablone 2005_07_27 Appendix Giga762SX WLAN dsl functions and their interdependency The following table shows which functions of your device are possible in which combination.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Schablone 2005_07_27 Appendix ì ì ì ì In the Internet Options window, click the Connections tab. Click LAN Settings. Deactivate all options in the LAN Settings window. Click OK and then OK again to close the Internet Options window. u Mozilla Firefox ì Open Mozilla Firefox. Click Tools and then Settings. ì In the Settings window, click Connection Settings...
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Appendix Schablone 2005_07_27 Specifications Interfaces 1 DSL RJ11, RJ-45 4 LAN RJ45, 10Base-T/100Base-TX, Auto-sensing 1 USB USB 2.0, for printer server or file server (max. 500 mA) 1 FXO RJ45, for connecting to the analogue telephone network 2 FXS RJ11, for connecting analogue terminals (phone, fax, answering machine) WLAN 802.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Appendix Schablone 2005_07_27 Software Browser-based configuration environment NAT, PPPoE, PPPoA VPN pass-through, L2TP, IPSec DHCP server and client, DynDNS NAT, virtual server, DMZ Security setup Firewall, prevention of hacker attacks MAC address filtering Log file WEP encryption WPA encryption WPA2 encryption IEEE 802.1x Integrated SIP client Authorisation This device is intended for analogue phone lines worldwide.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / appendix.fm / 02.07.2008 Appendix Schablone 2005_07_27 Open Source Software used in the product The product contains, among other things, embedded Open Source Software, licensed under an Open Source Software License and developed by third parties. These embedded Open Source Software files are protected by copyright.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Glossary Schablone 2005_07_27 Glossary Access point An access point, such as the Giga762SX WLAN dsl, is the centre of a wireless local network (WLAN). It handles the connection of the wireless linked network components and regulates the data traffic in the wireless network. The access point also serves as an interface to other networks, for example an existing Ethernet LAN or via a modem to the Internet.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary BSSID Basic Service Set ID BSSID permits unique differentiation of one wireless network (WLAN) from another. In Infrastructure mode, the BSSID is the MAC address of the Access point. In wireless networks in Ad-hoc mode, the BSSID is the MAC address of any one of the participants. Client A client is an application that requests a service from a server.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary DNS Domain Name System DNS permits the assignment of IP addresses to computers or Domain names that are easier to remember. A DNS server must administer this information for each LAN with an Internet connection. As soon as a page on the Internet is called up, the browser obtains the corresponding IP address from the DNS server so that it can establish the connection.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary DynDNS Dynamic DNS The assignment of Domain names and IP addresses is handled by the Domain Name Service (DNS). This service is now enhanced with so-called Dynamic DNS (DynDNS) for Dynamic IP addresses. This enables the use of a network component with a dynamic IP address as a Server on the Internet.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary Gateway A gateway is a device for connecting networks with completely different architectures (addressing, protocols, application interfaces etc.). Although it is not totally correct, the term is also used as a synonym for Router. Global IP address See Public IP address Half duplex Operating mode for data transmission. Only one side can send and/or receive data at the same time.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary Internet The Internet is a wide-area network (WAN) linking several million users around the world. A number of Protocols have been created for exchanging data, and these are known collectively as TCP/IP protocol stack. All participants on the Internet can be identified by an IP address. Servers are addressed by Domain names (e.g. siemens.com).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary IP pool range The Giga762SX WLAN dsl's IP address pool defines a range of IP addresses that the router's DHCP server can use to assign Dynamic IP addresses. ISP (Internet Service Provider) Internet service provider LAN Local network A local area network (or local network) links network components so that they can exchange data and share resources.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary NAT Network Address Translation NAT is a method for converting IP addresses (Private IP addresses) within a network into one or several Public IP addresses on the Internet. With NAT, several network components in a LAN can share the router's public IP address to connect to the Internet. The network components of the local network are hidden behind the router's IP address registered on the Internet.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary Port forwarding In port forwarding, the Giga762SX WLAN dsl directs data packets from the Internet that are addressed to a particular Port to the corresponding port of the appropriate network component. This enables servers within the local network to offer services on the Internet without them needing a Public IP address.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary Rekey interval The rekey interval is the period after which new keys are automatically generated for data encryption with WPA-PSK. Remote management Remote management refers to the ability to manage a network from a network component that is actually outside the local network (LAN).
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary network in wireless or wired mode. Wireless SIP phones (WLAN handsets) can likewise be used via the local network for Internet telephony. SMTP Simple Mail Transfer Protocol The SMTP Protocol is part of the TCP/IP protocol family. It governs the exchange of electronic mail on the Internet. Your Internet service provider provides you with access to an SMTP server.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary Switch A switch, like a Hub, is an element used to link different network segments or components. Unlike a hub however, the switch has its own intelligence that enables it to forward packets to only the subnet or network component they are meant for. See also: Bridge, Hub, Router, Gateway TCP Transmission Control Protocol The TCP Protocol is part of the TCP/IP protocol family.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary VCI Virtual Channel Identifier Part of an address in an ATM network. Virtual server A virtual Server provides a service on the Internet that runs not on itself, but on another network component. The Giga762SX WLAN dsl can be configured as a virtual server. It will then direct incoming calls for a service via Port forwarding directly to the appropriate Port of the network component in question.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / glossary.fm / 02.07.2008 Schablone 2005_07_27 Glossary WLAN Wireless LAN Wireless LANs enable network components to communicate with a network using radio waves as the transport medium. A wireless LAN can be connected as an extension to a wired LAN or it can form the basis for a new network. The basic element of a wireless network is the cell. This is the area where the wireless communication takes place.
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslSIX.fm / 02.07.2008 Index Schablone 2005_07_27 Index Numerics 10/100 Mbps switch port . . . . . . . . . . 26 128-bit encryption . . . . . . . . . . . . . . . 93 128-bit key . . . . . . . . . . . . . . . . . 56, 92 64-bit key . . . . . . . . . . . . . . . . . . 56, 92 Bridge . . . . . . . . . . . . . . . . . . . . . . . 168 Broadcast . . . . . . . . . . . . . . . . . . 86, 168 Browser . . . . . . . . . . . . . . . . . . . . . . . 37 BSSID .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslSIX.fm / 02.07.2008 Schablone 2005_07_27 Index DSL . . . . . . . . . . . . . . . . . . . . . . . . . 170 DSL interface configuring . . . . . . . . . . . . . . . . . . 42 Dynamic DNS see DynDNS Dynamic Host Configuration Protocol, see DHCP Dynamic IP address . . . . . . . . . . . . . 170 DynDNS . . . . . . . . . . . . . . . . . . . 79, 171 DynDNS service, see DynDNS DynDNS.org. . . . . . . . . . . . . . . . . 79, 80 E ECO . . . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslSIX.fm / 02.07.2008 Schablone 2005_07_27 Index menu . . . . . . . . . . . . . . . . . . . . . . . 61 service provider . . . . . . . . . . . . . . . 64 setting up access control . . . . . . . . 71 setting up multiple connection services . . . . . . . . . . . . . . . . . . . 62 Internet access . . . . . . . . . . . . . . . . . . 8 Internet connection changing configuration . . . . . . . . . 64 closing manually . . . . . . . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslSIX.fm / 02.07.2008 Schablone 2005_07_27 Index wireless . . . . . . . . . . . . . . . . . . . . . 11 Network Address Translation . . . 73, 175 Network component mobile . . . . . . . . . . . . . . . . . . . . . . 11 Network printer . . . . . . . . . . . . . . . . 137 network share . . . . . . . . . . . . . . . . . 154 New encryption . . . . . . . . . . . . . . . . . 90 O Open Source Software . . . . . . . . . . . 167 P Passphrase . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslSIX.fm / 02.07.2008 Index Schablone 2005_07_27 S Scan button . . . . . . . . . . . . . . . . . 25, 49 Security architecture, WEP . . . . . . . . . 92 Security measures . . . . . . . . . . . . . . . 18 Security settings . . . . . . . . . . . . . 39, 50 saving . . . . . . . . . . . . . . . . . . . . . . 59 Server . . . . . . . . . . . . . . . . . . . . . . . 177 virtual . . . . . . . . . . . . . . . . . . . . .
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / SX76x_dslSIX.fm / 02.07.2008 Schablone 2005_07_27 Index User interface buttons . . . . . . . . . . . . . . . . . . . . . 41 elements . . . . . . . . . . . . . . . . . . . . 41 Help . . . . . . . . . . . . . . . . . . . . . . . . 41 idle time . . . . . . . . . . . . . . . . . . . . 123 logout . . . . . . . . . . . . . . . . . . . . . . 41 starting . . . . . . . . . . . . . . . . . . . . . 37 V Vanity . . . . . . . . . . . . . . . . . . . . . . .