Operating instructions

ManualsBrandsSiemens ManualsConsumer electronicsGigaset 1054

Gigaset 1054: A30852-X954-B101-1-76191054TIT.FM28.10.96

Operating Instructions

8 mobile units

can be connected

2 non-cordless terminals

can be connected

Cordless Digital DECT Telephone System

Gigaset 1054

Note:

Please read these instructions, with their safety

precautions, before using this equipment!

Summary of content (169 pages)

PAGE 1
28.10.96 1054TIT.
PAGE 2
8.10.96 Gigaset 1054: A30852-X954-B101-1-7619 1054TIT.
PAGE 3
1054K10.IVZ 28.10.96 Gigaset 1054, GBR.: A30852-X954-B101-1-7619 Table of Contents Introduction Overview Figures Important Tips Safety Precautions ...................................................................................................................... 6 CE Mark of Approval and Certification for the Main Connection and Telephone Systems ......... 6 Putting Into Service Important Information ......................................................................................................
PAGE 4
1054K10.IVZ 28.10.96 Gigaset 1054, GBR.: A30852-X954-B101-1-7619 Table of Contents Operation with Standard Mobile Unit Standard Settings Saving / Changing the System Code ......................................................................................... 30 Enter / Change Mobile Unit PIN ................................................................................................ 31 Setting Tone Ring of the Mobile Unit .............................................................................
PAGE 5
1054K10.IVZ 28.10.96 Gigaset 1054, GBR.: A30852-X954-B101-1-7619 Table of Contents Lock Lock for Outgoing Calls (System Lock): Activate / Deactivate ................................................... 59 Emergency Numbers: Store / View ........................................................................................... 60 Delete Emergency Numbers ..................................................................................................... 60 Barred Numbers: Store ..........................
PAGE 6
1054K10.IVZ 28.10.96 Gigaset 1054, GBR.: A30852-X954-B101-1-7619 Table of Contents Outgoing Calls External Dialing with Dialpad ..................................................................................................... 89 External En-Bloc Dialing with Dialpad ........................................................................................ 91 Number Redial ...........................................................................................................................
PAGE 7
1054K10.IVZ 28.10.96 Gigaset 1054, GBR.: A30852-X954-B101-1-7619 Table of Contents Incoming Calls Call Pickup ................................................................................................................................ 125 Answer Call Waiting ................................................................................................................. 125 Switching Functions Set Internal Call Forwarding ...............................................................................
PAGE 8
1054K10.IVZ 28.10.96 Table of Contents 6 Gigaset 1054, GBR.
PAGE 9
28.10.96 Gigaset 1054,GBR: A30852-X954-B101-1-7619 1054K01.FM Introduction About this Device With the purchase of Gigaset 1054, you have selected a cordless system which combines the advantages of “unrestricted freedom of telephoning” with the convenience of a first rate telecommunications system. This device is equipped with modern digital technology based on the latest European standards for cordless telephones (DECT and GAP).
PAGE 10
28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 1054K01.
PAGE 11
28.10.96 1054K01.
PAGE 12
28.10.96 1054K01.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Important Tips Safety Precautions For your safety and protection, do not use the base station or mobile units in bathrooms or showers (damp areas); the telephones are not waterproof. Warning ● Use only approved rechargeable Nickel Cadmium batteries (NiCd) (See “Important Information about Using the Battery Cells,” page 15). Never use other rechargeable battery cells or normal (non-rechargeable) batteries.
PAGE 13
28.10.96 1054K01.FM Gigaset 1054,GBR: A30852-X954-B101-1-7619 Putting Into Service Important Information Dialing Mode The factory setting on your telephone system is for “tone dialing.” In some cases, it might be necessary to change the setting to the old dialing mode of “pulse dialing.” Instructions on how to determine and set the dialing mode are found on page 20 and on page 25.
PAGE 14
28.11.96 1054K02.
PAGE 15
28.11.96 .Putting 1054K02.
PAGE 16
28.11.96 1054K02.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Base Station Gigaset 1054 Tips for the Most Advantageous Installation of the Base Station If you are using non-cordless telephones along with this cordless telephone, we recommend that you keep as great a distance as possible between the telephone and the base station in order to prevent humming (technical source) noises on the telephone.
PAGE 17
28.11.96 1054K02.FM Putting Into Service Gigaset 1054, GBR: A30852-X954-B101-1-7619 Base Station Gigaset 1054 Range Depending on the surroundings, the outdoor range can be up to about 300 m. Within buildings, depending on spatial and structural conditions, a range of up to 50 m is possible. If you should leave the range, you will lose the radio contact to the base station and the symbol on the screen will blink.
PAGE 18
28.11.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 1054K02.
PAGE 19
28.11.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 1054K02.FM Putting Into Service Base Station Gigaset 1054 Connection Options at the Base Station E en 0221731550 S umm Rück E en 0221731550 F S umm 1 23 4 56 789 * 0 # ABC Rück D EF GH I JKL M NO P QRS T UV W X YZ F Mobile units 1 2 3 A BC DE F 456 GHI . - JK L M NO 7 8 9 * 0 # P QRS IN T T UV W XY Z .
PAGE 20
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Mobile Unit The Standard mobile unit can be used in temperature ranges between 10° C and 55° C, the Comfort mobile unit in ranges between 0° C and 45° C . Do not expose to water. Tips for Individuals with Hearing Aids Individuals with hearing aids should be aware that radio signals are projected into the hearing aid and, if strong enough, can result in a very disturbing humming tone.
PAGE 21
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Mobile Unit Mounting the Carrying Clip on the Mobile Unit The carrying clip can be mounted if desired. Grasp the mobile unit, holding the dialpad in the palm of your hand. You will see small holes parallel to the screen. Insert the clip first into the hole on one side and then snap it into the hole on the other side.
PAGE 22
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Standard Mobile Unit Displays uUPzAHn-88888888 A BCD E F G H The top lines display all numbers and symbols, the bottom lines display the symbols for different operating statuses. Symbol Explanation u Display after pushing the signal key, ekey. U Display of call forwarding, if programmed. P Manual dial pause z Memory empty.
PAGE 23
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Standard Mobile Unit ON OFF, LOCK Status The mobile unit can be set to three different statuses. • OFF No calls can be placed and no incoming calls are signalled. • ON Calls can be placed and received. In order to pick up a call, simply remove the mobile unit from the charging unit. C or If the mobile unit was not in the charging unit, then press the g key.
PAGE 24
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Standard Mobile Unit Switching the Status Switching from ON status: u ● ● to OFF status: Push the key until the display on the screen goes off. You will hear the key acknowledgment tone. to LOCK status: Push key briefly, until the display is updated. You will hear the key acknowledgment tone. C zzzz C Switching from OFF status: u ● to ON status: Push the key until the display appears on the screen.
PAGE 25
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Standard Mobile Unit Registering a Standard Mobile Unit at the Base Station Every additional mobile unit acquired must first be registered at the base station. For this, follow these steps: 1. The mobile unit must be switched off If necessary, turn it off by pushing the u key until the display on the screen goes off. 2. Push the registration key on the base station. Please use an object with a sharp point (e.g.
PAGE 26
28.10.96 1054K03.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Standard Mobile Unit Viewing and Setting the Dialing Mode The German Telekom AG offers two different dialing modes for telephone connections: ● Dial pulsing system (Dial Pulsing System = DPS) ● Dual-tone (multifrequency system = DTMF) A the time of initialization, your new telephone is set for tone dialing.
PAGE 27
1054K04.FM 8.11.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Comfort Mobile Unit Display External 1 0123456 CONSLT. MUTE F There are four lines on the graphics screen of your Comfort mobile unit. During dialing, the number which is being dialed is enlarged and displayed across two lines. The bottom lines contain the display fields for the dialog keys. All displays are shown in clear text. Some displays are illustrated with graphics; these are explained in the tables below.
PAGE 28
8.11.96 1054K04.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Comfort Mobile Unit ON, OFF, LOCK Status The mobile unit can be set to three different statuses. 1. OFF No calls can be placed and no incoming calls are signalled. 2. ON Calls can be placed and received. In order to answer a call, simply remove the mobile unit from the charging unit. Station 1 TEL.BOOK or REDIAL If the mobile unit was not in the charging unit, then press the g key. 3.
PAGE 29
8.11.96 1054K04.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Comfort Mobile Unit Switching the Status Switching from ON Status: Station 1 u ● to OFF status: Push the key until the display on the screen goes off.. You will hear the key acknowledgment tone. u ● to LOCK status: Push the key briefly, until the display is updated. You will hear the key acknowledgment tone. TEL.
PAGE 30
1054K04.FM 8.11.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Comfort Mobile Unit Registering the Comfort Mobile Unit at a Base Station Every additional mobile unit acquired must first be registered at the base station. For this, follow these steps: 1. Push the registration key on the base station. Please use an object with a sharp point (e.g. pencil, pen). The registration key begins to blink. Registration key 2.
PAGE 31
1054K04.FM 8.11.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service o NO Comfort Mobile Unit Enter the 4-digit system code. (Set at “0000” upon delivery). If necessary, correct with . Enter system code: * * - OK Push if you want to view but not register it. or NO OK Confirm that you want to register the Comfort mobile unit at the base station with that number. 1... 8 Select one of the internal numbers which is still available (for example, “4”).
PAGE 32
8.11.96 1054K04.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Comfort Mobile Unit Viewing and Setting the Dialing Mode The German Telekom AG offers two different dialing modes for telephones: ● Dial pulsing system (Dial Pulsing System = DPS) ● Dual-tone (multifrequency system = DTMF) At initialization, your telephone is set for tone dialing. Tone dialing (DTMF) is, however, only possible if your telephone lines are connected to a new digital switching exchange.
PAGE 33
28.10.96 1054K05.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Non-Cordless Devices Connection Jacks The Gigaset 1054 base station is equipped with two telephone jacks (B and C), for connecting non-cordless terminals. Internal station numbers are automatically allocated to the jacks: ● Jack B (upper) has the internal station number 0 ● Jack C (lower) has the internal station number 9 The connections of the auxiliary devices must have TAE plugs.
PAGE 34
1054K05.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Non-Cordless Devices Examples of Connections for Door Interphones via TFE (entrance telephone) The following example shows how Gigaset 1054 can be connected to different types of door stations via door interfaces, using the Siemens door interphone adapter. Door interphone adapters are available in retail stores. Doorstations RITTO 5760.
PAGE 35
1054K05.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Putting Into Service Non-Cordless Devices Connection Examples for Door Interphones via TFE The following examples show how Gigaset 1054 can be connected to different door station types with the help of the Siemens door interphone adapter (TFE/V).
PAGE 36
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Standard Settings Saving / Changing the System Code For your own protection, you can enter a new system code for the system. This protects your system settings and prevents registration of additional mobile units without the code. All entries are carried out from a mobile unit. The system code at the time of initialization is 0 0 0 0. w #( * Press these keys in sequence .
PAGE 37
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Standard Settings Enter / Change Mobile Unit PIN In addition, you can enter a new individual PIN for each mobile unit. This prevents unauthorized access, for example, to the personal data which you have stored. In addition, the mobile unit PIN is necessary for: Locking the mobile unit and enabling hotline, programming the hotline, unlocking the mobile unit and changing the mobile unit PIN.
PAGE 38
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Standard Settings Setting Tone Ring of the Mobile Unit Volume The tone ring volume of the mobile unit can be set at 6 levels. Level 1 = quiet, Level 6 = loud (status at initialization). w % o w Push the enter key. Push the 5 key. The tone ring which is set for the mobile unit rings and the volume level is shown; here, 2. Push any of the number keys (1 to 6). New setting; here, 6.
PAGE 39
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Standard Settings Activate / Deactivate Automatic Line Seizure If the automatic line seizure is activated (status at initialization), an external telephone line is immediately seized when the connect key is pressed, and a dial tone is heard. If this feature is deactivated, you must first dial a zero in order to get an outside line.
PAGE 40
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Standard Settings Activate / Deactivate Call Pickup Explanations of how to utilize the call pickup feature are found on page 36. w#!o . 0 Push the keys shown here in the sequence shown, and then enter the system code. 1____ CD Every digit entered replaces one dash on the screen. 1 CD Push 0 for both telephone lines. 012 z*/ Push these keys in sequence.
PAGE 41
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Incoming Calls Accept/Terminate Calls An incoming call (external, internal) is signalled via tone ringing as well as on the screen of the mobile unit. Screen Display Before Call Pickup: 1 Incoming external call: Display blinks. (here, telephone line 1) C Incoming internal call (here, from mobile unit 2): Display blinks.
PAGE 42
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Incoming Calls Call Pickup You can pick up an external call within a call group (see page 69) even if the call is not signalled on your mobile unit (for example, in the case of call forwarding; see page 52). For this, call pickup must be activated (see page 34). g we 1 F CD 1 F CD F Push connect key.
PAGE 43
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Incoming Calls Answer Call Waiting During an Internal Call The call waiting tone signals, during a call, that an external call is waiting. Picking up the external call during an internal call terminates the internal call. You are engaged in an internal call and b 3 hear the call waiting tone.
PAGE 44
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Outgoing Calls External Dialing, Using Dialpad After putting Gigaset 1054 and the standard mobile unit into service, you can generally place calls with any mobile unit which is switched to ON. g Seize external line Push connect key CD Automatic line seizure is programmed (status at initialization) Line code (LKZ) of the available telephone line is shown.
PAGE 45
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Outgoing Calls Using the Dialpad for External Dialing as En-Bloc Dialing En-bloc dialing makes it possible to view the external number which has been entered -- before it is dialed. Automatic Line Seizure Programmed o g Enter the number to be called. Here, for example, 1 2 3 4 5 6. Press the connect key within 30 seconds. The seize symbol will blink on the screen.
PAGE 46
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Outgoing Calls Number Redial Number redial enables the user to redial the number which was last dialed. g Push the connect key. You will hear the dial tone. The telephone line is seized z Push the number redial key. The telephone number is shown on the screen; here, for example, the line code 1 and the telephone number 1 2 3 4 5 6 78; the number is then dialed.
PAGE 47
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Outgoing Calls Internal Call to Another Mobile Unit or Auxiliary Device ü o Push internal key. Your station number is displayed; here, for example, 1. Enter the station number to be called, 2 i.e. push one of the keys 0 to 9; here, for example, 2. The station number of the mobile unit being dialed is shown; here, for example, 2. You will hear the internal ring tone.
PAGE 48
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Outgoing Calls Dialing Speed Dial Numbers You can store 10 frequently-used numbers as speed dial numbers. The programming of speed dialing numbers is described on page 46. g ö Push the connect key. You will hear the dial tone. 1 CD F Push the speed dial key.
PAGE 49
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit During the Call Placing a Call on Hold An existing call can be placed on hold, for example in order to consult with someone in the room. During this time, the person on the other end of an external call hears music. Placing an Internal Call on Hold b ü e You are engaged in an internal call. 3 CD G Push the internal key. The station number of the internal station and INT blink.
PAGE 50
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit During a Call Setting the Handset Volume You can set the handset volume on your mobile unit; it has three levels (1=normal to 3=loud) . This adjustment is possible either during a call or when the unit is in ON status. b w = !...§ w You are engaged in a call... 12345678 CD F The current setting is shown. (initialization status) 01 A CD F Push the keys (1...3) (e.g.
PAGE 51
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit During a Call Temporary Switch to Tone Dialing If your Gigaset 1054 is connected to a telephone line with tone dailing, then the following is not relevant for you. If your Gigaset 1054 is connected to a line with pulse dialing (DPS), you have the option of temporarily switching the dialing mode of your Gigaset 1054 from DPS to DTMF (tone dialing).
PAGE 52
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Speed Dial Speed Dial Numbers: Storing, Viewing or Changing You can save 10 frequently-used telephone numbers. The procedure for dialing speed dial numbers is described on page 42. Notebook Feature: You can also program telephone numbers as speed dial numbers during a call. wö o Push the enter and speed dial keys. Push one of the digit keys -- 0 to 9 -- to select a memory location for example, 8.
PAGE 53
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Speed Dialing Delete Speed Dial Numbers w (“ o w Push the enter key. Push the 8 and 2 keys. Enter the mobile unit PIN (see “Enter Mobile Unit PIN”). Every digit entered replaces one dash on the screen. Push the enter key again. All speed dial numbers are deleted.
PAGE 54
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Switching Features Consultation / Transfer Call With your Gigaset 1054 system, you have the option of carrying on external as well as internal consultation calls if the second telephone line is free. This feature could be used, for example, to consult an external business partner. Internal Consultation b ü =...) You are engaged in an external call.
PAGE 55
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Switching Features External Consultation You have the option, with this system, of transferring an external call to another external number as long as the second telephone line is available. b You are engaged in an external call.
PAGE 56
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Switching Features Toggle During a consultation call, you can toggle back and forth between two existing calls as often as you like. External toggle is also possible, if the second telephone line is available. Toggle Between an Internal and External Station: b ü =...) ,* ü# You are engaged in an external call. Push the internal key. The line code is displayed; here, 1.
PAGE 57
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Switching Features 3-Way Conference During a consultation call, you can connect the two partners, thus setting up a 3-way conference. An external 3-way conference is possible, as long as the 2nd telephone line is available. 3-Way Conference from Within an Internal Consultation Call: b ü You are engaged in an external call. Push these keys in sequence in order to set up a 3-way conference.
PAGE 58
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Switching Features Activate Internal Call Forwarding You can forward an external call to another internal station. The call can only be forwarded to a station which also has call forwarding activated. w#) ! Push these keys in sequence. =...) =...) w Use the digit keys to enter the station number of the internal station to which the call is to be forwarded.
PAGE 59
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Switching Features. Connection with the Door Interphone The door interphone can only be connected to auxiliary devices which have the internal station number 9. g ü) g Push the connect key. This connects you with the door interphone. Push these keys in sequence to activate the door opener. The door opener is activated for 3 seconds. You can activate the door opener repeatedly.
PAGE 60
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Call Charges, Call Length Display of Call Length: Activate / Deactivate The automatic call length display is activated after the last digit is dialed. The display remains visible for 4 seconds after the end of the call. w#!o Push these keys in sequence and then enter the system code . Every digit entered replaces one dash on the screen.
PAGE 61
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Call Charges, Call Length Activate / Deactivate Display of Call Charge or Call Charge Unit Before you can use this feature, you must first request from the German Telekom AG the transmission of the call charge data, if this service has not already been requested for your phone. However, please note that, for technical reasons, the charges on your telephone bill may differ from those shown on the screen.
PAGE 62
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Call Charges, Call Length Call Charge Display of Previous Call: Activate / Deactivate If this feature is activated (the call charge display must also be activated), the charges for the previous call are shown after the line is seized. This is ideal, for instance, for hotels or inns which wish to see the call charges for a guest.
PAGE 63
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Call Charges, Call Length Call Charge Totals per Internal Station: View / Delete w#(§o Push these keys in the sequence shown. Then enter the system code. Every entry replaces one dash. 8 ____ 3 A CD The registered internal stations are displayed. n12 A 456 A 33.00 CD 2.00 A CD 5.60 1.00 CD View Total Charges 0...) . ü 0...) w Enter the internal number.
PAGE 64
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Call Charges, Call Length Call Charge Totals per Telephone Line: View / Delete w#(§o Press these keys in the sequence shown, and then enter the system code. Every entry replaces one of the dashes. The registered internal stations are displayed. 8____3 A CD n12 A 456 012 A CD A CD CD View the Total Charges * 0!“ Select external telephone line 1 or 2; Press 0 to select both.
PAGE 65
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Lock for Outgoing Calls (System Lock): Activate / Deactivate Using the system lock, you can lock your base station. This ensures that no outgoing calls can be made. Exception: Calls to an emergency number are possible if these numbers are stored. Up to four 16-digit numbers can be stored (page 60). Incoming calls can still be accepted when the system is locked.
PAGE 66
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Emergency Numbers: Store / View In an emergency, it is important to be able to dial emergency numbers even if the system is locked. You can program four 16-digit numbers for this. w#“%o Push these keys in the sequence shown and enter the system code. Every digit entered replaces one dash on the screen. z 0...
PAGE 67
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Barred Numbers: Store The storage of barred numbers enables you to prevent numbers from being dialed which begin with a barred number. Thus, for example, if the barred number “00” is stipulated, international calls cannot be made. For each mobile unit and for each telephone, you can store up to three barred numbers (1 to 8 digits in each case).
PAGE 68
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Activate / Deactivate Barred Numbers More information about the barred numbers is found on page 61. w#($o Push the keys in the sequence shown here and then enter the system code . Every digit entered replaces one dash on the screen. =...) 1 or = w 8 ____4 A 8 A CD __4 CD A list of the registered stations is displayed. 01234 A CD Push these keys to select stations.
PAGE 69
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Set Class of Service for the Internal Stations By setting the COS for every registered mobile unit and telephone, you can stipulate which stations are allowed to place toll calls. At initialization, all devices have full trunk authorization. 1. Full trunk authorization (= initialization status) The device is capable of making outgoing and receiving incoming external calls. 2.
PAGE 70
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Locking the Mobile Unit / Activate Hotline You can lock your mobile unit, thus preventing unauthorized or unintentional use. If you have programmed a hotline number, then only this hotline number can be dialed. If no hotline number is programmed, only incoming calls are possible. To unlock the mobile unit, see page 66. . A C 8 C w Press the enter key. ( Press the 8 key.
PAGE 71
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Hotline Number: View / Delete / Store You can lock your telephone to prevent outgoing calls while still allowing one hotline number to be dialed. In this case, only this stored hotline number can be dialed. This can, for instance, be the number under which you can be reached during your vacation. w Push the enter key. ( Push the 8 key. ( Push the 8 key. o View Enter the mobile unit PIN.
PAGE 72
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Lock Dial Hotline Number o g Mobile unit is locked. 0123 C Push any key. The hotline number is dialed. 0123 CD To terminate the call: Push the connect key. Mobile unit remains locked. 0123 C H 0123 A C H 8 C H F H Unlock Mobile Unit Mobile unit is locked. w ( 0 o w Push the enter key. The memory is opened. Display without hotline number or with hotline number.
PAGE 73
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Set the Connection Configuration for Internal Stations You can stipulate which types of devices can be connected at each station. Cordless devices (1 to 8) can be mobile units, or devices such as Gigaset 1000TAE which can, for example, be used to connect telephones and fax machines to Gigaset 1054 without cords. For these stations, “mobile unit” is pre-set.
PAGE 74
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Ring Allocation for External Calls With the ring allocation for external telephone lines, you can stipulate which mobile unit or auxiliary devices should be rung when an external call arrives. The ring allocation is carried out by entering the internal number in the list of the collective call group or in the group list of the ring allocation.
PAGE 75
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Ring Allocation: Enter or Change Collective Call Group For more information about this, see page 68. If more than 6 cordless stations are in operation at once, the telephone number will only be displayed at the first five devices which are rung. The last registered stations are affected by this. w#!o Push the keys shown in the sequence shown here and then enter the system code.
PAGE 76
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Ring Allocation: Enter or Change Group Call For more information about this, see page 68. If more than 6 cordless stations are in operation at once, the telephone number will only be displayed at the first five devices when they are rung. The last registered stations are affected by this.
PAGE 77
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Ring Allocation: Enter or Change Number of Ring Cycles for Group Call For more information about this, see page 68. You can set the number of ring cycles after which group 1 should answer. If there is no answer after this number of rings, call group 2 is automatically rung. The factory setting at initialization is 3 ring cycles. You can choose anywhere from 1 to 9 tone rings.
PAGE 78
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Ring Allocation for the Door Interphone If you want to set up a door interphone, you can stipulate which internal stations should be rung from the door interphone. These internal stations can then activate the door opener. w#!o 1____ A CD Push the keys shown here in the sequence shown and then enter the system code. Every digit entered replaces one dash on the screen.
PAGE 79
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit System Settings Resetting the Base Station to the Status at Initialization You can reset the base station to its initialization status, for example if you feel that you no longer have a clear overview of the current settings. In order to keep this as simple as possible, however, not all settings are reset.
PAGE 80
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Mobile Unit Settings Advisory and Alarm Tones: Activate / Deactivate The mobile units are pre-set for optimum ease of operation. You can change these settings individually for each mobile unit. Key Acknowledgment Tone: Activate / Deactivate When this tone is activated, a tone is heard whenever a key is pushed. w§! Push enter and keys 3, 1. The current setting is shown.
PAGE 81
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Mobile Unit Settings Battery Alarm Tone: Activate / Deactivate If this tone is activated, an alarm is sounded when the battery needs to be exchanged. w§" Push enter and keys 3, 2. The current setting is shown. =or 1 w 32 1 A C Press the 1 to activate (initialization status). Press the 0 to deactivate. C Push enter key.
PAGE 82
28.10.96 1054K06.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Standard Mobile Unit Mobile Unit Settings Resetting the Mobile Unit to Initialization Status This procedure accomplishes the following: a) Reset to initialization status: • Tone ring volume • Tone ring pitch • Battery alarm tone • Range alarm tone • Synchronization tone • Automatic call acceptance • Acknowledgment tones b) Delete: • Repeat dial memory • Speed dial memory C Mobile unit is ON. w ( Press enter key.
PAGE 83
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Using the Menu Using the Dialog Keys External 1 0123456 MUTE CoNSLT. The bottom line of the Comfort mobile unit display has two fields with dark backgrounds. These show the features, which are based on the status. These features can be activated, when needed, using the dialog keys below them. Example: F Dialog keys To set up a consultation call, use the dialog key ture “CONSLT.
PAGE 84
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Using the Menu Menu Structure for System Settings The menu structure for settings is set up as a hierarchy. Generally, settings are first made in idle status. Additional settings options are also offered in other operating statuses (see “StatusDependent Menus“). You can move to the desired setting step by step.
PAGE 85
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Using the Menu Status-Dependent Menus Using the ß key, appropriate menus can also be activated from different operating statuses, such as call status, internal call, external call or consultation status. Example 1 “In Internal Call” You are engaged in an an internal call... Internal Call with 2 MUTE ß Handset Volume Telephone Book Ext. Consultation ------------------------- Push.
PAGE 86
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Standard Settings Enter / Change System Code For your own protection, you can enter a new four-digit system code for the system. This protects your settings and prevents registration of additional mobile units. All entries are carried out from a mobile unit. At the time of initialization, the system code is set at “0000“ . a ß The Comfort mobile unit is in idle status. Push this key; main menu appears..
PAGE 87
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Standard Settings Set Dialog Language If you would like the display texts to appear in a language other than the one which is already set (German), you can select between either German, English, French, Italian or Spanish for each device. a ß Settings The Comfort mobile unit is in idle status.
PAGE 88
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Standard Settings Enter / Change Mobile Unit PIN For your protection, you can enter a new four-digit PIN for each mobile unit. This protects your settings such as ,for example mobile unit lock, and your stored personal data. The mobile unit PIN setting at initialization is “0 0 0 0“. a ß The Comfort mobile unit is in idle status. Push this key; main menu appears.. Scroll with NEXT ...
PAGE 89
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Standard Settings Activate / Deactivate Call Pickup In order to be able to use the call pickup, it must be activated (status at initialization). The activation or deactivation of call pickup is valid for the entire system. Details on how to use call pickup are found on page 87. 1. In idle status, push the ß key and select “Service” from the main menu. 2.
PAGE 90
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Standard Settings Activate / Deactivate Automatic Line Seizure Push the g key to be able immediately seize an external line (status at initialization). If this function is deactivated, you must first dial a zero to place an external call. This setting can be adjusted for every internal station. 1. In idle status, push the ß key and select Service” from the main menu. 2.
PAGE 91
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Standard Settings Mobile Unit Settings a The mobile unit is in idle status. ß Push the F-key; main menu appears. Settings Handset volume Tone ringing Display contrast Register Language Auto. backlight Multicell config Initialisation - - - - - - - Handset volume Scroll through main menu with NEXT ... until “Settings” appears on the 1st line and then select with OK.
PAGE 92
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Incoming Calls Accept / Terminate Call An incoming call (external, internal) is signalled acoustically via the tone ring and visually on the screen of the mobile unit. Display Before Call Pickup RING OFF Incoming external call: (here, on line 1) Push this to switch off tone ring. You can still accept the call, as long as it remains visible on the screen.
PAGE 93
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Incoming Calls Call Pickup You can pick up an external call within your call group even if the call is not signalled on your mobile unit (for example, in the case of call forwarding, page 105). In order to do this, call pickup must be activated (see page 83). g Push the connect key Call on Ext 1 EXT 2 PICKUP Push this key, to pick up the external call. Pickup Ext 1 MUTE CONSLT.
PAGE 94
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Incoming Calls Answer Call Waiting During an Internal Call The call waiting tone signals that an external call is waiting while you are engaged in another call. If you answer the external call while you are engaged in an internal call, the internal call is terminated. b You are engaged in an internal call and hear the call waiting tone.
PAGE 95
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Outgoing Calls External Dialing with Dialpad After putting the base station and Comfort mobile unit into service, you can generally place calls with a mobile unit which is switched ON. a g The Comfort mobile unit is in idle status. Push connect key. You will hear the dial tone. Station 1 TEL.
PAGE 96
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Outgoing Calls To Terminate the Call: g Push the connect key or return the mobile unit to the charging unit. The length of time which elapsed during the call appears on the display. After 4 seconds, the screen again shows the following. 00:03:21 Station 1 TEL.
PAGE 97
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Outgoing Calls External En-Bloc Dialing with Dialpad En-bloc dialing allows you to view the external telephone number which you have entered before the number is dialed and to correct it, if necessary. a The Comfort mobile unit is in idle status . Automatic Line Seizure Activated o Enter the external telephone number. It is displayed in an enlarged form; here, 1234567. if necessary, correct with .
PAGE 98
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Outgoing Calls Number Redial Number redial allows you to automatically redial the last external number dialed from the mobile unit. a The Comfort mobile unit is in idle status . Station 1 TEL.BOOK REDIAL Push this key to activate number redial. The telephone number is shown on the display; here, 12345678. 12345678 DIAL Push this key to start dialing 12345678 b The subscriber answers.
PAGE 99
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Outgoing Calls Internal Dialing to Another Mobile Unit or Auxiliary Device a ü The Comfort mobile unit is in idle state. Station 1 REDIAL Push internal key. TEL.BOOK Your station number is displayed; here, 1. Internal Your own no.: 1 Coll.call @...9 Enter the desired internal station number, i.e. push one of the digit keys between 0 and 9; here, the 2.
PAGE 100
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Outgoing Calls Dialing from the Telephone Book You can enter up to 100 names and accompanying telephone numbers in the telephone book (depending on the length of the number or the name). Saving and administering the entries is described on page 99. The stored names can be found either via scrolling or by entering the letters of the name, using the alphanumeric keyboard on your Comfort mobile unit. a TEL.
PAGE 101
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit During the Call Call on Hold You can place an ongoing call on hold in order to, for instance, hold a consultation with someone in the room. Placing an Internal Call on Hold: b You are engaged in an internal call. Internal call with 5 MUTE ü RESUME e or Push this key. The internal station 5 is then placed on hold. Push this in order to retrieve the call from hold . Push this key. CONSLT.
PAGE 102
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit During the Call Temporary Switchover to Tone Dialing If your Gigaset 1054 is connected to a telephone line with tone dialing, then the following explanation has no relevance for you . If your Gigaset 1054 is connected to a telephone connection with pulse dialing (DPS), you have the option of temporarily switching your Gigaset 1054 from DPS to tone dialing (DTMF) during a call.
PAGE 103
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit During the Call Change Handset Volume You can change the volume of your mobile unit during a call. There are 3 levels (1=normal to 3=loud). Handset volume Telephone book Push this key; a menu appears. ß Cancel call park NEXT OK Push this to select the “Handset volume.” OK Display shows the current setting; here, Handset volume level 1 (normal).
PAGE 104
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Telephone Book Entering Names and Characters The following explains how you can enter letters and digits to administer the telephone book. After selecting, for example, “New entry” in the telephone book menu, enter the telephone number. The dialpad automatically switches to letter entry so that you can enter the name.
PAGE 105
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Telephone Book Dialing Convenience with the Telephone Book Up to about 100 entries can be stored in the electronic telephone book of the Comfort mobile unit (58 when all spaces are used; names up to 16 characters, tel.numbers up to 22 characters). Before using the “Telephone book” menu, please read the chapter “Menu Techniques” which describes how to enter digits and letters.
PAGE 106
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Change entry Change or view entry. Telephone Book Scroll to names to be changed, using NEXT, and select with OK. BAIER BRUNNER C˜SAR NEXT First the telephone number is offered (for changes). (if necessary, delete with reverse) BAIER 01234567_ Tel No? OK ... then the name. BAIER_ 01234567 Complete process with SAVE. Delete entry DELETE Delete tel. book 100 Delete entries individually.
PAGE 107
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Switching Functions Internal Consultation / Transfer of Call With this system, it is also possible to make consultation calls and to transfer an external call to another internal station. Activate Internal Consultation: b You are engaged in an external call. External 1 00:12:10 MUTE CONSLT. Ext. 1 waiting ü 1...9 Push this key; The external call is placed on hold.
PAGE 108
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Switching Functions External Consultation / Transfer Call With this system, you can carry on a consultation call and transfer an external call to another external station, if the 2nd telephone line is available. Activate External Consultation: b CONSLT. You are engaged in an external call. External 1 00:00:39 MUTE Push this key to activate external consultation . External 2 Please dial TEL.
PAGE 109
1054K07A.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Switching Functions Toggle During a consultation call, you can toggle back and forth between the two established calls as often as you like. External toggle is possible as long as the 2nd telephone line is available. Toggle with Internal and External Stations: b TOGGLE TOGGLE TOGGLE You switch back to the original external call partner. External 1 Int.
PAGE 110
28.10.96 1054K07A.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Switching Functions 3-Way Conference During a consultation call, you can set up a 3-way conference call with two call partners. When this function is in use, charges and length of call are not displayed. An external 3-way conference is possible, as long as the 2nd telephone line is available. External Call Parallel to an Internal Consultation: b CONF.
PAGE 111
1054K07B.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Switching Functions Activate/ Deactivate Internal Call Forwarding Using internal call forwarding, you can forward external calls to other internal stations. The call can only be forwarded to internal stations which have call forwarding activated. a ß Service The mobile unit is in idle status . Push this key; the main menu appears. Scroll through main menu with NEXT...
PAGE 112
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Switching Functions Connection to the Door Interphone The door interphone should be connected only to the auxiliary device connection with the internal station number 9. This feature is only available for stations which are listed in the door interphone ring allocation list. Tone ring is signalled by the door interphone (3 short tones). g Push the connect key. You are connected to the door interphone.
PAGE 113
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Charges, Call Length Display of Charges / Display of Call Length You can use any mobile unit to view the total charges as well as the charges for the most recent call. The charge total includes only the charges occurring on that particular mobile unit. The setting of the unit cost is described on pages 108 and 109.
PAGE 114
1054K07B.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Charges, Call Length Activate and Deactivate Call Length and Call Charge Display / Set the Unit Cost In order to be able to use this feature, you must first apply to the German Telekom AG to have your phone lines set up for “unit measurement”. Your Gigaset 1054 can display either the telephone units, the charges or the call length. At the time of initialization, the call length display is activated.
PAGE 115
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit ChargFactor-.-- Charges, Call Length Stipulate unit cost with decimal point. Any time the unit cost is changed, the total charges are reset to zero.! Thus, any change in the unit cost should only be carried out at the end of a billing period.. ChargFactor--- Stipulate unit cost without decimal point. Any time the unit cost is changed, the total charges are reset to zero.
PAGE 116
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Lock Lock to Prevent Outgoing Calls / Emergency Numbers Using the system lock, you can prevent the base station from being used for outgoing calls. Calls can still be received. Exception: Connection setup with an emergency number is possible even if the system lock is activated. Up to four 16-character emergency numbers can be stored. 1.
PAGE 117
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Lock Enter, View, Delete Restricted Numbers / Activate or Deactivate Lock By storing restricted numbers, you can ensure that telephone numbers which begin with one of these restricted numbers cannot be dialed. Thus, for example, if “00” is stipulated as a restricted number, no international calls can be made.
PAGE 118
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Lock Delete All Barred Numbers Using this function, all restricted numbers are deleted at once. 1. In idle status, push the ß key and select “Service” from the main menu. 2. In the Service menu, select “System settings” and enter the system code. (see also page 115).
PAGE 119
28.10.96 1054K07B.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Lock Set the COS for Internal Stations By setting the Class of Service for every registered mobile unit, you can stipulate which internal stations can place external toll calls. At the time of initialization, all devices are fully trunk authorized. 1. Full Trunk Authorization (= status at initialization) Incoming and outgoing external calls are permissible. 2.
PAGE 120
1054K07B.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Lock Lock Mobile Unit /Change Hotline Number / Mobile Unit PIN In the “Telephone lock” menu, you can make/change settings for hotline numbers or mobile unit PIN which are valid in connection with the mobile unit lock. a ß Telephone lock The Comfort mobile unit is in idle status. Push this key;. main menu appears. Scroll through the main menu with NEXT ....
PAGE 121
1054K07B.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings First Steps for System Settings The following procedure is generally the first step to be taken in making most system settings. After completing this procedure, select the desired system settings from the menu. a ß Service Station 2 The Comfort mobile unit is in idle status. TEL.BOOK REDIAL Push the F-key, the main menu appears: Scroll through the main menu using NEXT...
PAGE 122
28.10.96 1054K07C.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings Set Connection Configuration for Internal Stations You can stipulate which different types of devices are to be used at the different stations. Cordless terminals can be mobile units or cordless connections such as Gigaset 1000TAE . For these stations, “mobile unit” is pre-set. For non-cordless devices, the device type “Telephone” is set.
PAGE 123
28.10.96 1054K07C.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings Resetting the Base Station to the Status at Initialization You can reset the base station to the initialization status, for example if you no longer have a clear overview of your settings. In order to keep this as simple as possible, however, not all settings are reset.
PAGE 124
1054K07C.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings Ring Allocation for External Calls Using the ring allocation (allocation to telephone numbers), you can stipulate which mobile units or auxiliary devices should be signalled when an external call comes in. The ring allocation is carried out by entering the internal numbers in the list of the collective call group or group call list.
PAGE 125
28.10.96 1054K07C.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings Set / Change Ring Allocation and Ring Cycles For more information about this, see page 118. If more than 6 cordless stations are in operation, the telephone number of an incoming call is displayed only at the first five stations. The stations which were the last to be registered are affected by this. 1. In idle status, push the ß key and select “Service” from the main menu. 2.
PAGE 126
1054K07C.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings Set / Change the Number of Rings for Group Call By selecting the number of rings, you can stipulate the number of tone rings which are signalled at call group 1 before the call is diverted to call group 2. External 1/2 After choosing “External 1/2” (see previous page), the menu shown here appears: Scroll, using NEXT... No.of ring cycles until “No.
PAGE 127
1054K07C.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit System Settings Cancel Registration for Mobile Unit Every mobile unit can be unregistered, using that mobile unit or any other. To cancel the registration of a mobile unit, see page 24. a The Comfort mobile unit is in idle state. ß Push the F key; main menu appears. Scroll through the main menu with NEXT ...
PAGE 128
1054K07C.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Comfort Mobile Unit Mobile Unit Settings Activate / Deactivate Advisory and Alarm Tones ß Push the F key; the main menu appears. Scroll through main menu with NEXT until ... Tones “Tones“ appears in the 1st line; select with OK. Key click Batt.warn.tone Range tone Acknowldg tone Error tone Synchr. tone ------------- The menu to set the tones appears (complete menu at left).
PAGE 129
28.10.96 1054K08.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Outgoing Calls General The following operating instructions apply to a connected non-cordless telephone. Other auxiliary devices such as, for example, fax machines, VTX and modems can be operated in the same manner as long as they have a handset or a connect key and a dialpad. When using an auxiliary device, the keys should be pressed relatively quickly in order to retain the dialing connection.
PAGE 130
28.10.96 1054K08.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Outgoing Calls Temporary Switchover to Tone Dialing If your Gigaset 1054 has a tone dialing connection, then the following does not apply to you. If your Gigaset 1054 has a pulse dialing connection (DPS), you can switch your Gigagset 1054 temporarily from DPS to tone dialing (DTMF) during a call.
PAGE 131
1054K08.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Incoming Calls Call Pickup You can pick up an external call even if the call is not directly signalled on your telephone. This situation can occur, for example, in the case of internal call forwarding ( page 126), if the internal call has already been forwarded. For this, your station must be part of the call group and call pickup must be activated (status at initialization).
PAGE 132
1054K08.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Switching Functions Set Internal Call Forwarding You can forward an external call to another internal station. The call can only be forwarded to a station which has call forwarding activated. c 79 1 o 0 ... 9 a Pick up the handset. Push these keys in sequence to initiate call forwarding. Dial the station number of the internal station to which the call is to be forwarded.
PAGE 133
1054K08.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Switching Functions Consultation / Transferring a Call With your Gigaset 1054, you can set up not only internal but also external consultation calls, as long as the 2nd telephone line is available. This can be used, for example, to consult with an external business partner. Fundamentally, an internal consultation is initiated with the digit keys external consultation is initiated with R 90 .
PAGE 134
1054K08.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Switching Functions Toggle During a consultation call, you can toggle between the two existing calls as often as you like. External toggle is also possible if the 2nd telephone line is available. Toggle with a Telephone with Pulse Dialing b 5 5 a You are engaged in a consultation call. Push this key to return to the original call. Push this key to return to the consultation call, etc.
PAGE 135
1054K08.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation with Auxiliary Device Switching Functions Connection with the Door Interphone The door interphone can only be connected to an auxiliary device with the internal station number 9. Call is signalled from the door interphone. (3 short tones) c R 9 Pick up the handset. You are now connected with the door interphone. Push these keys to activate the door opener. The door opener is activated for 3 seconds.
PAGE 136
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System General Information In Gigaset 1054 multicell systems, you can use a mobile unit to reach multiple base stations. With the proper placement of your Gigaset 1054, you can expand the radio range within which you can use the mobile unit. ● You can register and operate your mobile units on up to 4 base stations of Gigaset 1054. ● Up to 8 mobile units can be registered on every Gigaset 1054 base station.
PAGE 137
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System Standard Mobile Unit Registering the Standard Mobile Unit on Multiple Base Stations Up to 8 mobile units can be registered on one base station. 1. The mobile unit must be switched off If necessary, switch off by pushing the u key until the display goes off. Registration key 2. Push the registration key on the base station. For this, please use a sharp object (e.g. pencil, ballpoint pen).
PAGE 138
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System Standard Mobile Unit Base Station Selection, Automatic / Manual / Combined If you are using multiple base stations, you can stipulate which base station your mobile unit should use. The options are manual, automatic or combined search; the setting is carried out from the mobile unit in idle state. 1.
PAGE 139
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System Standard Mobile Unit Activate / Deactivate the Base Station Number If the display is activated, the current base station is signalled. w§& Press these keys in sequence. The previous setting is displayed. 0or ! w 36 1 A C Push the 1 to activate, push the 0 to deactivate. (Status at initialization) Push the enter key again. Display of the base station; here, 1.
PAGE 140
1054K09.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System Comfort Mobile Unit Register Comfort Mobile Unit on Multiple Base Stations Up to 8 mobile units can be registered on a base station. 1. Push the registration key on the base station , Use a sharp object (such as a pencil or ballpoint pen). The registration key begins to blink. 2. Then, (within 1 minute) on the Mobile Unit): ß Push the F key; main menu appears.
PAGE 141
1054K09.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System OK Comfort Mobile Unit Confirm the internal number. if necessary, correct with OK Close the registration procedure. The screen of the Comfort mobile unit shows the internal number with which it is registered. Own internal no.: 4 OK Registered with internal no.4 Note: ● You can register your Comfort mobile unit on up to 4 base stations. ● Up to 8 mobile units can be registered on one base station.
PAGE 142
1054K09.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Multicell System Comfort Mobile Unit Base Stations Selection: Automatic / Manual / Combined If you are using multiple base stations, you can stipulate which base station your mobile unit should use. The options are manual, automatic or combined search. The setting is carried out from the mobile unit in idle state. 1.
PAGE 143
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Standard Mobile Unit General Information The Gigaset 1054 can be connected to telephone systems with tone dialing (DTMF) or pulse dialing (DPS). Enter Trunk Code (AKZ) At the time of first start up on a telephone system, you must program a dialing timeout for the through connection to the public network.
PAGE 144
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Standard Mobile Unit Enter Main Trunk Code (HAKZ) If your telephone system is being operated as a subsystem on a main telephone system, you must also program the code for the main telephone system (HAKZ) when first putting it into service. Please also note the operating instructions for your telephone system. The 0 ... 9 keys as well as the star, pound and signal keys can be used for the HAKZ.
PAGE 145
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Standard Mobile Unit Change Length of Timeout after AKZ / HAKZ The dialing timeout, at initialization, is set at 3 seconds. If your telephone system requires a different setting, you can change the setting as follows: w# 1 o Push the enter key and the # key. - A CD Push the 1. 1____ CD 1 CD Enter the system code. Every digit entered replaces one dash on the display.
PAGE 146
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Standard Mobile Unit Deleting AKZ and HAKZ w#!o Push the keys in the sequence shown and enter the system code. Every digit entered replaces one dash on the display. 0 Push 0 for both telephone lines. z"%§ Push these keys in the sequence shown to return to the status at initialization. w Push the enter key. AKZ / HAKZ is / are deleted.
PAGE 147
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Standard Mobile Unit Set / Change Time for Flash At the time of initialization, the time for the flash is set at .25 seconds. If a different setting is necessary for your telephone system, you can change it as follows: w# 1 o Push the enter key and the # key. - A CD Push the 1. 1____ CD 1 CD A Enter the system code. Every digit entered replaces one dash on the screen.
PAGE 148
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Comfort Mobile Unit General Information The Gigaset 1054 can be connected to telephone systems with tone dialing (DTMF) or pulse dialing (DPS). Enter the Trunk Code (AKZ) At the time of first start up on a telephone system, you must program a dialing timeout for the through connection to the public network.
PAGE 149
28.10.96 1054K09.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Using the Features Activating Features of the Telephone System Gigaset 1054 can use the range of features available within a telephone system on which it is operating; it does this via code procedures. You can, for example, take advantage of features such as consultation, call switching, toggle, 3way conference, call forwarding, etc. These features can, as a rule, be activated using a code procedure.
PAGE 150
1054K09.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Operation on Telephone Systems Using the Features Example: Setting Up a Consultation with Comfort Mobile Unit You can set up a consultation call to another station within the telephone system during a call. For this, please see the operating instructions for your telephone system. b You are engaged in a call .... External 1 34567 MUTE CONSLT. Push the dialog key. You will hear the dial tone. External 2 Please dial TEL.
PAGE 151
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Acoustic Signalling Signal Tones External Call ring ring .8 sec tone Internal Call 2 sec pause ring ring ring ring .5 sec tone .5 sec tone .8 sec pause 4.2 sec pause Call from the Door Interphone tüüt ring tüüt ring tüüt ring 3 x .2 sec tone and .3 sec pause Automatic Recall/ Callback ring ring .8 sec tone .8 sec pause Internal Dial Tone ring ring ring 3 x .2 sec tone and .3 sec pause; repeat after .
PAGE 152
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 General Information Taking Care of the System Wipe the mobile units and base station with a damp cloth or an anti-static cloth. Never use a dry cloth (danger of static electricity). Technical Data Standards No.
PAGE 153
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 General Information Tips for Troubleshooting Not every problem signifies an actual defect in your telephone. You may be able to save time and money by correcting simple problems yourself. The following information can help you in doing this.
PAGE 154
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 General Information Warranty Siemens AG guarantees this device for 6 months from the date of purchase. Please keep your receipt as proof of this date. Within this warranty period, Siemens AG will repair, free of charge, all defects stemming from faulty material or manufacturing. Siemens AG reserves the right to decide whether the defective device should be repaired or replaced.
PAGE 155
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 General Information Connection Configuration The Gigaset 1054 system conforms to the regulations used by the German Office for Telecommunication Certification (Bundesamt für Zulassungen in der Telekommunikation (BZT)).
PAGE 156
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Glossary ADPCM Adaptive Delta Pulse Code Modulation Digital transmission method; an analog signal is depicted in digital values and the difference between the two values is transmitted. Call Waiting If, during a call, a call arrives from another station, call waiting is signalled via a tone. The telephone number of the call which is waiting is, in some cases, displayed.
PAGE 157
28.10.96 1054K10.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Glossary LED Light-emitting diode (Registration key on the base station) Park (Unpark) a Call You want to briefly interrupt a call (the connection remains) because, for example, you - are leaving your workstation - want to continue the call from another telephone within the same multicell connection The call cannot be parked for more than 3 minutes.
PAGE 158
28.10.96 1054K10.SIX Gigaset 1054, GBR: A30852-X954-B101-1-7619 Index A Acoustic signalling .................................... 145 Advisory tones ............................ 74, 122, 145 Alarm display, rechargeable batteries ........ 16 Alarm tones ................................ 75, 122, 145 Automatic backlight ............................................. 85 line seizure ................................... 33, 84 selection of base .............................. 136 Auxiliary device ................
PAGE 159
28.10.96 1054K10.SIX Gigaset 1054, GBR: A30852-X954-B101-1-7619 Index G General information .................................. 146 Glossary ........................................... 150, 151 Group call ........................................... 70, 119 H Handset volume ................................... 44, 97 Hearing aid ................................................. 14 Hold .............................................. 43, 95, 127 Hotline ........................................
PAGE 160
28.10.96 1054K10.SIX Gigaset 1054, GBR: A30852-X954-B101-1-7619 Index Register mobile unit .....................19, 24, 131, 134 on multiple base stations ..........131, 134 Registration key ....................19, 24, 131, 134 Reset to initialization status base station .................................73, 117 mobile unit .....................................76, 85 Ring allocation ....................................68, 118 collective call .....................................119 door interphone .......
PAGE 161
1054K11.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Standard Mobile Unit This section describes the most important operating procedures in a quick reference form. For more detailed descriptions and for information on the functions not mentioned here, see the other chapters of these operating instructions. After every heading, you will find in parentheses a reference to the page where a more detailed description of the function is found.
PAGE 162
28.10.96 1054K11.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Standard Mobile Unit Setting Tone Ring Pitch (page 32) w & o w Push these keys in sequence Select pitch, using the keys 1 ... 6.
PAGE 163
28.10.96 1054K11.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Standard Mobile Unit Internal Consultation during an External Call (page 48) ü Push the internal key o e Dial the internal telephone number. Carry on the consultation call. Push the signal key. You are reconnected to the original external call. External Consultation during an External Call (page 49) 0e Dial 0 as line code. Push the signal key o e Dial the external telephone number.
PAGE 164
28.10.96 1054K11.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Comfort Mobile Unit This section describes the most important operating procedures in a quick reference form. For more detailed descriptions and for information on the functions not mentioned here, see the other chapters of these operating instructions. After every heading, you will find in parentheses a reference to the page where a more detailed description of the function is found.
PAGE 165
1054K11.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Comfort Mobile Unit Setting the Tone Ring Volume (page 81) ß Push menu key Settings OK Tone ringing OK Select in sequence and confirm OK Tonering.
PAGE 166
1054K11.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Comfort Mobile Unit Storing the Telephone Number and Name in the Telephone Book (page 99) ß OK Phone book Push the menu key Select and confirm. Follow the directions on the display. Dialing the Telephone Number from the Telephone Book (page 94) TEL.BOOK NEXT Push dialog key Find name DIAL Push dialog key. Telephone number is dialed automatically.
PAGE 167
1054K11.FM 28.10.96 Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Auxiliary Device This section describes the most important operating procedures in a quick reference form. For more detailed descriptions and for information on the functions not mentioned here, see the other chapters of these operating instructions. After every heading, you will find in parentheses a reference to the page where a more detailed description of the function is found.
PAGE 168
28.10.96 1054K11.FM Gigaset 1054, GBR: A30852-X954-B101-1-7619 Quick Reference Operating Instructions - Auxiliary Device Accepting a “Call Waiting” Call (page 125) 78 R If a call arrives while you are engaged in another call, push these keys in sequence to pick up the call waiting call. Toggle (page 128): Telephone with Pulse Dialing 5 ... 5 To toggle between two ongoing calls, push this key -- if necessary, it can be pushed repeatedly.
PAGE 169
1054TIT.FM Issued by the Division of Private Communication Systems Manufacturing Plant for Telephone Devices Kaiser-Wilhelm-Straße 56 46395 Bocholt Siemens Aktiengesellschaft Gigaset 1054: A30852-X954-B101-1-7619 © Siemens AG 1996 Terms of delivery and the right to make technical changes reserved. Document No. A30852-X954-B101-1-7619 Printed in Germany (10/96) Printed on environmentally-friendly paper 50% recycled 50% chlorine-free, bleached 28.10.