Operating instructions

30
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96
1054K06.FM
Operation with Standard Mobile Unit Standard Settings
For your own protection, you can enter a new system code for the system. This protects your
system settings and prevents registration of additional mobile units without the code. All entries
are carried out from a mobile unit. The system code at the time of initialization is 0 0 0 0.
w#(
*
Press these keys in sequence
.
o
Enter the previously-set system code.
Every digit entered replaces one dash;
thereafter, 8 dashes appear.
o
Enter the new system code
(be sure to note this).
Every digit entered replaces one of the
first 4 dashes.
o
Enter the new system code again.
Every digit entered replaces one of the
last 4 dashes.
w
Push the enter key to complete
the procedure.
Note:
If you have entered an erroneous system code, a negative acknowledgment tone is sig-
nalled and the display will blink.
A procedure can be terminated by pushing the connect key.
If you forget your system code, it will be necessary to disassemble your device. Forgetting
your system code is like losing a key. If this happens, please contact your system vendor.
Saving / Changing the System Code
A
C
D
8
--- - - -
n
A
C
D
8
-- -
n
A
C
D
8
- - -- - - - -
n
A
D
8
- - --
n