Technical data

ManualsBrandsSiemens ManualsConsumer electronicsGigaset 1054

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-76191054ITIT.FM

10.06.1999

User Instructions

8 mobile units

can be connected.

2 corded terminals

can be connected.

Multicell capability

Direct dialing in

Cordless Digital DECT Telephone System

for EURO-ISDN Basic Connections

Gigaset 1054isdn

Attention:

Please read these User Instructions and

safety instructions before using this equipment!

Summary of content (191 pages)

PAGE 1
0.06.1999 1054ITIT.FM Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 s Gigaset 1054isdn Cordless Digital DECT Telephone System for EURO-ISDN Basic Connections 8 mobile units can be connected. 2 corded terminals can be connected.
PAGE 2
10.06.1999 1054ITIT.FM Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Guide for Quick installation Installation steps for the Gigaset 1054isdn 1. Please read the Safety Instructions before starting (page 7). 2. Install the base station first (page 11). 3. Insert the battery in the mobile unit and charge as needed (page 15). 4. Register the mobile unit on base station (page 20 or 24). Your Gigaset 1054isdn is now ready for use. Preparation for using the ISDN-Functions 1.
PAGE 3
10.06.1999 1054ITIT.
PAGE 4
10.06.1999 1054ITIT.
PAGE 5
10.06.1999 1054ISD.IVZ Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Table of Contents Guide for quick installation Overview figures Safety Instruction Installation The Equipment ............................................................................................................................ 8 System Code ............................................................................................................................... 8 Important Information for the Euro-ISDN Connection .......
PAGE 6
10.06.1999 1054ISD.IVZ Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Inhaltsverzeichnis Operating the Standard Mobile Unit Basic Settings Enter / Change System Code .................................................................................................... 29 Entering / Changing Mobile Unit PIN ......................................................................................... 30 Connecting and Starting Operation of the System: Multiple Device Connection ......................
PAGE 7
10.06.1999 1054ISD.IVZ Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Table of Contents Cost, Call Duration Activate / Deactivate the Call Duration Display .......................................................................... 60 Activate / Deactivate the Call Cost or Call Time Unit Display .................................................... 61 Activate / Deactivate Cost Display for Previous Call .................................................................. 62 Set or Control Cost Factor .....
PAGE 8
10.06.1999 1054ISD.IVZ Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Inhaltsverzeichnis Basic Settings Enter / Change System Code .................................................................................................... 89 Enter / Change Mobile Unit PIN ................................................................................................ 90 Connection / Operation Type of System: Setting Multiple Device Connection ..........................
PAGE 9
10.06.1999 1054ISD.IVZ Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Table of Contents Cost,Call Duration Cost Display / Call Duration Display ..........................................................................................124 Activate / Deactivate Call Duration and Cost Display and Cost Factor ......................................125 Locking Lock for Outgoing Call (System Lock) / /Emergency Numbers .................................................
PAGE 10
.06.1999 1054ISD.IVZ Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Inhaltsverzeichnis Multicell System Step by Step Procedure ...........................................................................................................152 General Overview .....................................................................................................................153 Possible Combinations ...........................................................................................................
PAGE 11
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Safety Instructions Warning For your personal safety and protection you should never use the base station or any mobile units in the bath or other wet environment. The devices are not water proof. ● Use only Nickel Cadmium batteries (NiCd batteries) (see “Important Information for Using Batteries“, (page 16). ● Never use other chargeable batteries or normal (non chargeable) batteries.
PAGE 12
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation The Equipment With the Gigaset 1054isdn, you have purchased a cordless Euro-ISDN system that offers the advantage of “mobile telephoning“ with the comfort of a high quality ISDN telecommunication installation. The device has been designed using modern digital technology and conforms to the European standard for cordless telephones (DECT) and the Euro-ISDN standard.
PAGE 13
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Important Information for the Euro-ISDN Connection Before you connect your Gigaset 1054isdn to the Euro-ISDN network you will need to acquire a Euro-ISDN basic connection from your telecommunications company. You will receive detailed information from your telecommunications company.
PAGE 14
1054I-02.FM 10.06.
PAGE 15
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Base Station Tips for Setting up your Base Station If you are using a telephone connected by a cord in addition to your cordless telephone, we recommend that you keep the largest possible distance between the base station and the telephone. This will help to avoid any possible sound distortions (for technical reasons) in the telephone.
PAGE 16
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Base Station Operational Range Depending on the surrounding conditions, the operational range is about 300 meters in the open. In buildings, the operating distance is about 50 meters depending on the room layout and construction methods. If you leave the operational area, you will lose contact with the base station and the ON symbol will blink in the display.
PAGE 17
1054I-02.FM 10.06.
PAGE 18
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Base Station Connection Options at the Base Station Mobile units Extern 0221731550 Stumm Rückfr. Extern F 0221731550 Stumm 1 2 3 4 5 6 7 8 9 * 0 # IN T Rückfr.
PAGE 19
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Mobile Units The standard mobile unit can be operated within a temperature range between 10° C and 55° C. The comfort mobile unit in a range between 0° C and 45° C. Keep them away from water.
PAGE 20
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Mobile Unit Assembling the Carry Clip on the Mobile Unit If needed, you can attach the carry clip. Hold the mobile unit with the key pad against the palm of your hand. On the side at the same level as the display you will see small holes. Insert the clip in one of the holes and then attach it to the hole on the other side.
PAGE 21
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Standard Mobile Unit Display uUzAH -888888888 A BCD E F G H In the top portion all numbers and character are displayed, and in the lower portion the symbols for the various operation conditions are displayed. Symbol Explanation u Display after pushing the signal key, ekey. U Display of calling forwarding, if programmed z Memory empty. A Display of blocking of unwanted calls, if programmed.
PAGE 22
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Standard Mobile Unit ON- OFF-, LOCK modes You can set the mobile unit to three different modes. 1 OFF You cannot make a call and an incoming call will not be signaled. 2 ON You can place and receive calls. If you wish to answer a call you need only remove the mobile unit from the charger or If the mobile unit was not in the charger then you need only press the g key.
PAGE 23
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Standard Mobile Unit Changing Modes Switching from ON mode: u ● ● to the OFF mode: Press the key until the display symbols disappear. Key acknowledgement tone sounds. to the LOCKmode: Press the key briefly until the display has updated itself. Key acknowledgement tone sounds. C zzzz C Switching from OFF mode: u ● to the ON mode: Press the key until the symbols are displayed. Key acknowledgement tone sounds.
PAGE 24
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Standard Mobile Unit Registrating a Standard Mobile Unit at a Base Station Each mobile unit must be registrated at the base station. In doing this, please note the following: 1. The mobile unit must be switched off. If necessary, turn it off by pressing the u key until the display is clear. 2. Press the registration key on the base station.
PAGE 25
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Comfort Mobile Unit Display External 0123456 CONSLT.. The graphic display of the comfort mobile unit is flexible. When dialing, the call number is displayed oversized using two display lines. In the last line you will see the display fields for the dialogue keys.All displays are in clear, easy to understand text. Some displays include graphics for easier understanding. These are explained in the following table.
PAGE 26
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Comfort Mobile Unit ON-OFF-LOCK Mode You can set the mobile unit to three different modes. 1. OFF You cannot place a call and incoming calls will not be signalled. 2. ON You can place calls. If a call comes in, then you must only lift the mobile unit from the charger. Station 1 TEL.BOOK or REDIAL If the mobile unit was not in the charger, then the g key must be pressed. 3.
PAGE 27
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Comfort Mobile Unit Changing the Mode Switching from the ON mode: Station 1 u ● to the OFF mode: Press this key until the display is cleared. You will hear the acknowledgement tone. u ● To the LOCK mode: Press this key briefly until the display updates itself. You will hear the acknowledgement tone. TEL.
PAGE 28
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Comfort Mobile Unit Registrating the Comfort Mobile Unit at a Base Station Each mobile unit must be registrated at a base station. Please note the following: 1. Press the registration key on the base station. Use a pointed object for this, for example, a pencil or a pen. The registration key will start blinking. Registration key 2.
PAGE 29
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Comfort Mobile Unit o Enter the 4 digit system code. (The default setting is “0000“). If necessary use. to correct it. NO Press if you just wish to verify, but do not want to registrate. Enter System Code: * * - OK Registrated at Station 1 NO OK or This confirms whether you wish to registrate the comfort mobile unit at the base station using this number. OK 1 ...
PAGE 30
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Non-Cordless Devices Connector Socket The base station Gigaset 1054isdn has two telephone sockets (B and C) that are available for non-cordless end user devices. The connection sockets are automatically assigned internal call numbers: ● Socket B (top) has the internal call number 0 ● Socket C (bottom) has the internal call number 9 The connectors for the accessory equipment must have TAE plugs.
PAGE 31
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Cord Connected Devices Connection Examples for Intercoms TFE The following example will show you how the Gigaset 1054isdn can be connected to different intercom types using the Siemens intercom adapter (TFE) with an intercom interface. A door intercom adapter can be acquired through a qualified retailer. Door intercoms RITTO 5760.
PAGE 32
1054I-02.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Installation Non-Cordless Devices Connection Examples for Intercoms Using TFE The following example shows how different types of door intercoms can be connected to Gigaset 1054isdn using the Siemens door intercom adapter (TFE/V).
PAGE 33
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Enter / Change System Code For your security you can enter a new system code for your system. This protects your system settings from modifications and the registrating of additional mobile units. All entries are made from a mobile unit. The default system code is 0 0 0 0. w #( * Press the displayed keys one after another 8 A CD o Enter the previous system code.
PAGE 34
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Entering / Changing Mobile Unit PIN In addition to the system code, you can also enter a PIN for each mobile unit. This protects your saved personal information from unauthorized access.
PAGE 35
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Connecting and Starting Operation of the System: Multiple Device Connection In addition to setting the connection type “Multiple Device Connection“ (see also page 9) you can also set the operational mode, either local (one cell) or multiple cell operation (see also page 153). The default setting is multiple device connection and one cell operation.
PAGE 36
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Connection / Operation Type of the System: Setting System Connection In addition to the connection type “System Connection“ (see also page 9) the dialing prefix and system call number are also entered during this process. When using this setting your Gigaset 1054isdn can only be operated with a system connection that was installed by the German Telekom AG.
PAGE 37
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Saving / Assigning Multiple Subscriber Numbers When you contract a multiple device connection for either a standard or a comfort connection from your telecommunications company, you will receive 3 multiple subscriber numbers (MSN) (see also page 9 and the Glossary after page 171). You can store these settings in your Gigaset 1054isdn using the following procedure.
PAGE 38
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Setting the Ringer for the Mobile Unit Volume The ringer volume for the mobile unit can be set at one of six different levels. The range is: Level 1 = quiet, level 6 = loud (default setting). w % o w Press save key. Press the 5 key. The mobile unit ringer rings at the set volume and the volume setting is displayed; here 2. Press any key (1 through 6). New settings; here 6.
PAGE 39
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Activate/Deactivate the Automatic Line Assignment When you press the phone key you will receive an outside line immediately (default setting). If this function is not active, then you will need to dial a “0“ to place a call on an external line. w#!o Press the displayed keys one after another and the system code (default setting 0000).
PAGE 40
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Activate / Deactivate Call Pickup In order to use call pickup (see page 39) this must be active (default setting). When you activate or deactivate the call pickup function, it applies for the entire system. w#!o Press the displayed keys one after another and then enter the system code (default setting 0000).
PAGE 41
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Basic Settings Set Call Number Display You can use a number of different display functions with the ISDN basic connection: ● Display call number of caller ● Display the call number of the called communications partner ● Suppress the display of the caller’s call number for the communications partner.
PAGE 42
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Incoming Calls Answering / Completing Calls An incoming call (internal and external) is signaled by a ring and the display of a mobile unit. The display before answering a call: An incoming external call: The display will blink. An incoming internal call (here from mobile unit 2): The display will blink.
PAGE 43
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Incoming Calls Call Pick-Up You can accept external calls within your call group (page 75) even when the call was not signaled on your mobile unit (for example, with Call Forwarding, page 56). The prerequisite is that the Call Pickup option is activated (see page 36). g we Press the phone key.
PAGE 44
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Incoming Calls Answering Call Waiting during an Internal Call The call waiting tone signals an external call during an existing call (Activate / Deactivate Call Waiting, page 36). If you answer the external call during the internal call, then the internal call will be terminated. b You are in the middle of an internal call and you hear the call waiting tone.
PAGE 45
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Outgoing Calls Using the Key Pad for External Calls After installing your Gigaset 1054isdn and the standard mobile unit you will generally be able to make a call to a mobile unit that is switched to ON. g o Press the phone key. You will hear the dial tone and the symbol in the display will blink. Enter the desired call number.
PAGE 46
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Outgoing Calls Redialing Using redial allows you to automatically redial the last dialed external number from that phone. g Press the phone key. You will hear the dial tone. The line is busy z Press the redial key. The call number will be displayed; here 1 2 3 4 5 6 7 8 and will then be dialed.
PAGE 47
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Outgoing Calls Internal Dialing to Another Mobile Unit or Auxiliary Device ü o Press internal key. Your subscriber number is displayed; here, for example, 1. Enter the desired subscriber number, i.e. a number key between 0 and 9; here 2, for example. The subscriber number of the selected mobile unit is displayed; here, for example, 2. You hear the internal ring tone.
PAGE 48
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Outgoing Calls Dialing Speed Dial Numbers You can save up to 10 often used call numbers as speed dial numbers. The storing of speed dial numbers is described on page 49. g ö CD -- - F CD F Press the speed dial number until the desired speed dial number with the call number is displayed (here. for example, speed dial number 8).
PAGE 49
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Outgoing Calls Setting “Anonymous Calling“ for the Current Call You can suppress the display of your call number for your communication partner only for the current call. Your call number will not be displayed on your communications partner’s telephone. Your call is anonymous. In order to use this function, you will need to contract the “case-by-case suppression of the call number transmission“.
PAGE 50
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit During a Call Placing a Call on Hold You can “hold“ an active call, for example, to have a brief conversation away from the phone . Holding an internal call: b ü e You are making an internal call. 3 CD G Press the internal key. Call number of the internal subscriber and INT will blink. 3 CD G Press the signal key to stop the hold and return to the call.
PAGE 51
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit During a Call Controlling the Answering Machine / Using Telephone Services When you have an established connection you can use the mobile unit key pad, for example, to use an answering machine, access a voice mail box or to use one of the services of the German Telekom, such as “Cityruf“ , “Scall“, etc.
PAGE 52
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit During the Call Changing the Handset Volume You can set the handset volume in your mobile unit to one of three levels (1=normal to 3=loud). This setting can only be set during a call or when the component is in the ON mode. b w = !...§ w You are making a call... Press these keys one after another. CD F The previous setting will be displayed (default setting) 01 A CD F Press the (1...
PAGE 53
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Speed Dial Changing,Verifying and Storing Speed Dial Numbers You can store the 10 most frequently dialed numbers. Dialing the speed dial numbers is described on page 44. Note book function: It is possible to store a call number as a speed dial number during a call. w Press the save key. ö Press the speed dial number. 0 ...
PAGE 54
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Speed Dial Delete All Speed Dial Numbers w (“ o w 50 Press the save key. A C Press the 8 and 2 key. 8 - --- 2 A C Enter the mobile unit PIN (default setting 0000) Each entered number replaces a dash in the display. 8 -- 2 Press the save key. Delete all speed dial numbers.
PAGE 55
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions Consultation / Call Transfer With your ISDN system you have the ability, to execute both internal and external consultation functions. Start consultation with: ü for an internal consultation call to another subscriber on Gigaset 1054isdn. e for an external consultation call. Internal Consultation b ü o You are connected externally.
PAGE 56
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions External Consultation b You are connected externally. e Press the signal key. o 12345678 CD F -- - CD F Enter the desired external call number. 34567890 CD F You will hear the ring tone, the subscriber answers. You can conduct a consultation call with the external subscriber.
PAGE 57
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions Toggling When making a consultation call you can switch between the two connected calls as often as you wish. Toggling between an internal and external subscriber: b You have an external connection. ü Press the internal key. Your internal number is displayed; here 1. o ,* ü# ü# 123456 FG Press these keys one after another to switch back to the internal call.
PAGE 58
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions Three Way Conference During a consultation call you can bring both communications partners together in a three way conference. Three way conference from an internal consultation call: b ü o ,* we You are connected externally. Press the internal key. The external call will be placed on hold. CD F CD FG Enter the desired subscriber number; here 3. Subscriber 3 answers.
PAGE 59
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Swtiching Functions Parking an External Call You can park a call using a “park number“ (interrupt a call without breaking the connection) and then pick it up at any another telephone, for example, a mobile unit, using the same park number (unpark). The maximum parking duration is 3 minutes. The parking function is only possible on the same multiple device connection.
PAGE 60
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions External Call Forwarding You can forward an external call to another external subscriber. There are three types of external call forwarding (see also “Glossary“, page 171) ● immediate, ● when busy, ● delayed (after 5 rings). The external call forwarding function can only be used on a multiple device connection together with multiple subscriber numbers.
PAGE 61
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions Delete External Call Forwarding You can delete call forwarding definitions individually or all at once. Delete individual external call forwarding definitions: w#$ = z 40 Press these keys one after another.
PAGE 62
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions Activate Internal Call Forwarding You can forward an external call to another internal subscriber. The call can only be forwarded to those subscribers that have not set any call forwarding definitions. 91 A CD Use the number key pad to enter the number for the internal subscriber to whom the call should be forwarded.
PAGE 63
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Switching Functions Activate / Deactivate External Automatic Callback If you call someone externally whose line is busy, you can activate the “automatic call back“ function. As soon as the desired connection is free, you will be called back automatically.
PAGE 64
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Cost, Call Duration Activate / Deactivate the Call Duration Display The call duration display will start when the last digit has been dialed. Following the completion of the call it will remain in the display for 4 seconds. w#!o z )& 1 or = w 1____ Press the displayed keys one after another and then enter the system code (default setting 0000).
PAGE 65
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Cost, Call Duration Activate / Deactivate the Call Cost or Call Time Unit Display Your Gigaset 1054isdn can display either the telephone time units, the costs or the call duration in the display. The default setting has the call duration in the display.
PAGE 66
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Cost, Call Duration Activate / Deactivate Cost Display for Previous Call If this function is set (the cost display must also be set), then the cost for the previous call will be displayed before the next outgoing call. This makes sense, for example, in hotels and restaurants, to be able to see the call costs for the individual guests.
PAGE 67
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Cost, Call Duration Verify / Delete Cost Sums for Each Internal Subscriber w#(§o Press the displayed keys one after another and enter the system code (default setting 0000). Each entry replaces a dash. The registrated internal subscribers will be displayed. Check cost sum 0...) Enter the desired internal subscriber number. The cost sum and the costs for this subscriber are displayed.
PAGE 68
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Cost, Call Duration Verify / Delete Cost Sums for each Multiple Subscriber Number w#(§o Press the displayed numbers one after another and enter the system code (default setting 0000). Each entry replaces a dash. The registrated internal subscribers will be displayed.
PAGE 69
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Activate / Deactivate the Lock for Outgoing Calls (System Lock) With the system lock you can lock your base station. It is then not possible to place any calls. Exception: Calls with emergency numbers are possible, provided that they are stored. Four 16 digit emergency numbers can be stored (page 66). Incoming calls can be accepted in the locked mode.
PAGE 70
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Verify / Save Emergency Numbers In an emergency it is important that you are able to dial emergency number in spite of the active system lock. You can store up to four 16 digit emergency numbers. w#“%o Press these keys one after another and enter the system code (default setting 0000). z 0...) w A CD Each entered number replaces a dash in the display.
PAGE 71
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Storing Restricted Numbers By storing restricted numbers, you can prevent numbers from being dialed that begin with one of the restricted numbers. For example, if you set “00“ as a restricted number, then it will no longer be possible to make calls to foreign countries. For each mobile unit you can store up to 3 separate restricted numbers (each from 1 to 8 digits).
PAGE 72
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Activate / Deactivate Restricted Numbers You will find explanations for restricted numbers on page 67. w#($o Press the displayed numbers one after another and then enter the system code (default setting 0000). Each entered number replaces a dash in the display. =...) 1or = w 8 ____4 A 8 A CD __4 CD A list of the registrated subscribers will be displayed.
PAGE 73
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Blocking Undesired Calls By entering up to three 16 digit call numbers you can stipulate which subscribers can call you. The calls of all subscribers that have different call numbers will not be put through to you. If the block is active, then it will be displayed on the mobile unit.
PAGE 74
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Set Authorization for Subscribers By defining authorizations for each registrated mobile unit you can determine which internal subscriber is permitted to make external, toll calls. When delivered the device is capable of being used freely on outside lines. 1. Full external authorization(= default setting) The phone can be used for incoming and outgoing external calls. 2.
PAGE 75
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Lock Mobile Unit / Activate Direct Dial You can lock your mobile unit and thus prevent its unauthorized or unwanted use. If you have stored and activated a direct dial number, then only this direct dial number can be dialed (page 73). If you haven’t stored a direct dial number, then you can only receive incoming calls. Deactivating the block on a mobile unit page 73. .
PAGE 76
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking View, Delete, Store a Direct Dial Number You can lock your telephone for outgoing calls, yet permit the dialing of one direct dial number. Only this stored call number can be dialed (page 73). This number can be, for example, the number where you can be reached while on holiday. w Press the save key. ( Press the 8 key. ( Press the 8 key.
PAGE 77
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Locking Dialing a Direct Dial Number o Mobile component is locked. 0123 C Press any key. The direct dial number is dialed. 0123 CD Press the phone key. Mobile component remains locked. 0123 C H 0123 A C H 8 C To finish the call: g H F H Removing a Lock on Mobile Unit Mobile component is locked. w ( 0 o w Press the save key. The memory is opened.
PAGE 78
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Setting the Connection Configuration for the Internal Subscriber You can define which types of devices can be served on the subscriber connections in the system.
PAGE 79
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Ring Allocation on a Multiple Device Connection The setting of ring allocatioin determines: 1. On which mobile units or other devices using which multiple subscriber number external call number) an external call should be signaled. 2.
PAGE 80
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Ring Allocation : Enter / Change Collective Call Group Before creating a collective call group, you must store external call numbers (multiple subscriber numbers, MSN) for a multiple device connection (see „Saving / Assigning Multiple Subscriber Numbers“ on page 33).
PAGE 81
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Ring Allocation: Enter / Change Group Call Before you define forwarding with group subscriber lists, you must store external call numbers (multiple subscriber numbers, MSN) for a multiple device connection (see „Saving / Assigning Multiple Subscriber Numbers“ on page 33).
PAGE 82
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Ring Allocation: Set / Change Ring Count for Group Call Using the ring count, you can define the number of rings used to signal the first call group before the second call group is signaled. The default setting is three ring cycles. You can choose from 1 to 9 rings. w#!o Press the displayed keys one after another and then enter the system code (default setting 0000).
PAGE 83
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Setting Ring Allocation on a System Connection On a system connection the ring allocation is automatic based on the assignment of the internal subscriber numbers from the system number. You do not need to make any additional setting. In cases when you cannot be reached, e.g.
PAGE 84
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Ring Allocation for Entrance Telephone If you want to install an entrance telephone, you can define which internal subscriber should be called from the entrance telephone. This internal subscriber is then able to operate the door opener. w#!o Press the displayed keys one after another and then enter the system code (default setting 0000).
PAGE 85
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Deactivating a Mobile Unit Each mobile unit can be deactivated using either that mobile unit or any other mobile unit. w#/"o Press the displayed keys one after another and then enter the system code (default setting 0000). Each entered number replaces a dash in the display . 0...
PAGE 86
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit System Settings Restoring the Default Settings on the Base Station You can restore all of the default settings on the base station, for example, if you have lost track of the current settings. To minimize the level of effort not all of the settings will be restored.
PAGE 87
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Mobile Unit Settings Activate / Deactivate Advisory and Warning Tones Upon delivery the mobile units are set for optimal use. You can modify the settings for each of the mobile units. Activate / Deactivate Key Touch Tones If this tone is active, the pressing of the keys will be confirmed with a tone. w§! Press the save and the 3 and 1keys. The previous settings are displayed.
PAGE 88
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Mobile Unit Settings Activate / Deactivate Battery Warning Tone If this tone is active, a tone will sound to warn you to change batteries. w§" Press the save and the 3 and 2 keys. The previous settings are displayed. = or 1 w 32 1 A C To activate press the 1 key (default setting) To deactivate press the 0 key. C Press the save key. The setting is stored.
PAGE 89
1054I-06.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Standard Mobile Unit Mobile Unit Settings Restoring the Mobile Unit’s Settings to Initialization Status This procedure does the following a) Restored to default settings: • • • • • • • Ringer volume Ringer color Battery warning tone Range warning tone Synchronisation tone Automatic call answering Acknowledgement tones b) Deleted: • Redial memory • Speed dial memory C The mobile unit is in the ON mode.
PAGE 90
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Using the Menu Using the Dialog Keys External 0123456 CONSLT. The comfort mobile unit has two dark, reserved fields in the bottom line of the display in which appropriate functions are displayed based on the current mode. You can use these functions as needed by using the dialog keys below them.
PAGE 91
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Incoming Calls Menu Structure for System Settings The menus for the system settings use a hierachical structure. Generally, the settings are started from the non-active mode. Additional setting options are also offered for other operational modes (see ““Mode Dependent Menus“). You can move step-by-step though the desired settings.
PAGE 92
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Incoming Calls Mode Dependent Menus With the ß key you can access the appropriate menus in different operational modes when using the phone, for example, dialing mode, internal call, external mode or consultation mode. Example 1 “During an internal call“ b You have an internal connection... Internal call with 2 MUTE ß Handset volume Phone book Ext. consultation Temp.
PAGE 93
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Enter / Change System Code For your protection you can enter a new four digit system code for the system. This protects your settings and guards against the registrating of additional mobile units. All entries are made from a mobile unit. The default system code is „0000“ . a ß The comfort mobile unit is in the non-active mode. Press and the main menu is displayed. Scroll with NEXT.
PAGE 94
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Enter / Change Mobile Unit PIN For your protection you can enter a new four digit PIN for each mobile unit. This protects your settings and blocks your mobile units. The default mobile unit PIN is “0000“ a ß The comfort mobile unit is in the non-active mode. Press and the main menu is displayed. Scroll with NEXT... until “Telephone lock“ is in the 1st line of the main menu and...
PAGE 95
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Connection / Operation Type of System: Setting Multiple Device Connection The Gigaset 1054isdn can be operated both on a multiple device connection and an installation connection (see also page 9).
PAGE 96
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Connection / Operation Type of System: : Setting System Connection The Gigaset 1054isdn can be operated both on a multiple device connection and a system connection (see also page 9). Using the following procedure you can setup operation on a system connection. Using this setting your Gigaset 1054isdn can only be operated on a system connection that 1.
PAGE 97
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Storing / Assigning Multiple Subscriber Numbers If you have contracted a multiple device connection from the Telekom in either the standard or the comfort package, then you will receive 3 multiple subscriber numbers (MSN) (see also page 9 and Glossary page 171). Use the following procedure to store these number in your Gigaset 1054isdn.
PAGE 98
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Setting Dialog Language If you would like the display text to appear in a language other than the default setting (German), then you can select from any of the following languages German, English, French, Spanish, and Italian. a ß The comfort mobile unit is in the non-active mode. Press the F key and the main menu is displayed: Use NEXT to scroll through the main menu.
PAGE 99
1054I-7A.FM 10.06.
PAGE 100
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Activate / Deactivate Call Pickup To use the call pickup function (see page 99), it must be active (default setting). The activation or deactivation of the call pickup function applies to the entire system. 1. In the non-active mode press the ß key and select “Service“ from the main menu. 2.
PAGE 101
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Basic Settings Activate / Deactivate Automatic Line Seizure By pressing the phone key you will receive an outside line immediately (default setting). If this function is not active, then you will need to dial a 0 to receive an outside line. 1. In the non-active mode press the ß key and select “Service“ from the main menu. 2.
PAGE 102
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Incoming Call Answering / Terminating a Call An incoming call (external, internal) is signaled through the ringer and the mobile unit display. Display before answering call RING OFF Incoming external call: Call..01234567 Should be pressed to turn ringer off. You can still answer the call as long as it is still visible in the display.
PAGE 103
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Incoming Call Call Pickup You can pick-up a call within your call group (page 136) even when the call wasn’t directed to your telephone (e.g., using call forwarding, page 120). The requirement is that the call pickup function is active (see page 96). You are called from an external line... Call ..0123456 PICKUP PICKUP Should be pressed to answer the call. External External call CONSLT.
PAGE 104
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Incoming Call Answering Call Waiting during an Internal Call The call waiting tone will signal you that an external call is coming in during an internal call. If you want to answer the external call during the internal call, then the internal call will be completed. The call waiting function can be turned on or off (page 96). b You have an internal connection and you hear the call waiting tone.
PAGE 105
4I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Outgoing Call External Dialing from the Key Pad After installing the base station and comfort mobile unit you can generally start making calls with a mobile unit in the ON mode. a The comfort mobile unit is in the non-active mode. Station 1 TEL.BOOK g o Press phone key. You hear the dial tone. Press the number keys to dial an external number.
PAGE 106
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Outgoing Call Dialing Externally with the Key Pad as En-Bloc Dialing En-bloc dialing allows you to review the entered external call number in the display before dialing. a The comfort mobile unit is in the non-active mode. Station 1 TEL.BOOK o Enter external call number. It will be displayed oversized, here 1234567. if necessary, correct with . g Press the phone key within 30 seconds.
PAGE 107
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Outgoing Call Redial The redial function allows you to dial the most recently dialed external call number again. g REDIAL. Press the phone key. You hear the dial tone. Should be pressed to use the redial function. The call number is displayed; here 12345678. The call number is dialed The subscriber answers. You conduct the call. External Please dial TEL.
PAGE 108
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Outgoing Call Dial Internally to Another Mobile Unit or Other Device a The comfort mobile unit is in the non-active mode. ü Press the internal key. Your subscriber number is displayed; here 1. Station 1 REDIAL TEL.BOOK Internal: Own no.: 1 COLL.CALL @...9 Enter the desired subscriber number, e.g. one of the number keys between 0 and 9 here 2.
PAGE 109
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Outgoing Call Dialing from the Telephone Book You can enter up to 100 names with telephone numbers in the telephone book (this depends on the length of the name and call number). The storing and managing of the entries is described on page 112. You can access the stored names either by scrolling through the telephone book, or by entering letters using the alpha key pad.
PAGE 110
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Outgoing Call Setting the „Anonymous Call“ for the Current Call With this function you can prevent the display of your call number on your partner’s telephone (known as the “case-by-case suppression of call number“ by the Telekom). a ß The comfort mobile unit is in the non-active mode. Press the F key; main menu is displayed. In the main menu, scroll with NEXT ...
PAGE 111
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit During a Call Holding a Call You can”hold“ a call, for example, to examine a document away from the phone. Holding an internal call: b You have an internal connection. Internal Connection with 5 MUTE ü RESUME Press this. The call with internal subscriber 5 is placed on hold. Press this to release the hold. e or CONSLT. Internal Int.
PAGE 112
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit During a Call Accessing the Answering Machine / Using Telephone Services When a connection has been established you can use the key pad of the mobile unit to, for example, access an answering machine or voice mail box, or use one of the services of the German Telekom AG, such as “Cityruf“, “Scall“, etc. The required functional switch of the key pad (to “temp.
PAGE 113
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit During a Call Changing the Handset Volume You can adjust the handset volume of your mobile unit during a call. There are three levels available (1=normal to 3=loud). External b You have an external connection. ß Press the F key and the menu is displayed. OK Press OK to select “Handset volume“ . The display shows the current setting, here level 1 (normal). CONSLT.
PAGE 114
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit During a Call Mute Function If you do not want you communications partner to hear you (for example, you have a brief discussion in your room), then you can temporarily silence the mobile unit. External b You have an external connection. ß Press the F key and the menu is displayed. 12345678 CONSLT.
PAGE 115
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Telephone Book Entering Letters and Numbers This section explains to you, how you can enter letters and numbers to manage the telephone book. Entering numbers: 1, 2 to @ You enter numbers (not on 1st place) by entering the respective number key on the key pad 4 or 5 times. Entering letters: The key pad (number keys) can be used as an alpha key pad for entering names in the telephone book.
PAGE 116
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Telephone Book Comfort Dialing with the Telephone Book The comfort mobile unit contains a telephone book that can store up to 100 entries (58 when all spaces are used: Names up to 16 places, call numbers up to 20 places). Before you use the “Telephone Book“ menu, please read the chapter „Entering Letters and Numbers“ on page 111.
PAGE 117
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Change entry Telephone Book Change or check entries. Scroll for the names that you want to change with NEXT and select with OK . BAIER BRUNNER C˜SAR NEXT The call number will be offered for change first. (if needed, delete with back space ) BAIER 01234567_ Phone No.? OK ... then the name. OK BAIER_ 01234567 Name? SAVE Finish with SAVE. Delete entry Delete individual entries.
PAGE 118
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Internal Consultation Call / Call Transfer With your system you have the capability of conducting an internal consultation call and transferring external calls to other internal subscribers. Starting internal consultation: b You have an external connection. ü Press; The external call is placed on old. 1...9 Enter the desired internal number; here 3.
PAGE 119
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions External Consultation With your ISDN system you have the ability to make external consultation calls, for example, to an external business associate. Starting an external consultation call: b You have an external connection. External 00:00:39 CONSLT. CONSLT. or e o Press, to start an external consultation call External Please dial TEL.
PAGE 120
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Toggle With a consultation call you can switch back and forth between the two active calls. Toggle between internal and external subscribers: b TOGGLE You have an internal consultation call., The external partner is placed on hold. You switch back to the original call . Consultation partner 5 is waiting. TOGGLE Press to return to the consultation call, etc...
PAGE 121
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Three Way Conference During a consultation call you can initiate a three way conference with the other two communications partners. For this function costs and duration displays will not be visible. For a three way conference with only external subscribers you must contract the ISDN service feature “Three Way Conference“ from the German Telekom AG.
PAGE 122
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Parking an External Call You can park a call using a “park number“ (interrupt a call without breaking the connection) and then pick it up at any another telephone, for example, a mobile unit, using the same park number (unpark). The maximum parking duration is 3 minutes. The parking function is only possible on the same multiple device connection.
PAGE 123
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions External Call Forwarding You can forward an external call to another external subscriber. There are three types of external call forwarding (see also “Glossary“, page 171): immediate, ● ● when busy, ● delayed (after 5 rings). The external call forwarding function can only be used on multiple device connections together with multiple subscriber numbers.
PAGE 124
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Deactivate External Call Forwarding for Individual Multiple Subscriber Number a g ß The mobile unit is in the non-active mode. Press the phone key. “fnct. set. act.“ means that a system function has been set, for example an external call forwarding. Press. Menu for the setting of system functions is displayed. Systemfunct. set Use OK to select “Systemfunct. set“ Int.
PAGE 125
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Activate Internal Call Forwarding You can forward an external call to another internal subscriber. The call can only be forwarded to those subscribers that haven’t set any call forwarding definitions. a ß Service The mobile unit is in the non-active mode. Press the F key; Main menu is displayed. Scroll the main menu with NEXT...
PAGE 126
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Activate Automatic External Call Back If you call someone externally whose line is busy, you can activate the “automatic call back“ function. As soon as the desired connection is free, you will be called back automatically.
PAGE 127
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Switching Functions Connection with Door Intercom The door intercom can only be connected with an accessory connection with the internal number 9. This function can only be used by subscribers that are entered for the door intercom in the ring allocation settings (page 135). A ring from the door intercom (3 short rings). g Press the phone key. You are connected to the door intercom.
PAGE 128
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Cost,Call Duration Cost Display / Call Duration Display You can manage the accumulated cost sums and the cost for the most recent calls for each mobile unit. The cost sums include only the costs that were accumulated by the specific mobile unit. Setting the cost factor is described on page 125.
PAGE 129
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Cost, Call Duration Activate / Deactivate Call Duration and Cost Display and Cost Factor Your Gigaset 1054isdn can display either the telephone time units, the costs or the call duration in the display. The default setting has the call duration in the display.
PAGE 130
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Charge factor -.-- Charge factor --- Define cost factor with decimal point. Each time you change the cost factor the cost sums will be set to zero! Therefore, you should change the cost factor only at the end of a billing period. Define cost factor without a decimal point.
PAGE 131
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Locking Lock for Outgoing Call (System Lock) / /Emergency Numbers With the system lock you can block your base station for outgoing calls. Incoming calls can still be answered. Exception: Calls with emergency numbers are possible, provided that they are saved. Four 16 digit emergency number can be saved. 1. In the non-active mode press the ß key and select “Service“ from the main menu. 2.
PAGE 132
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Locking Edit Restricted Numbers / Activate, Deactivate Lock By storing the restricted number you can prevent numbers from being dialed that begin with one of the blocked numbers. For example, if you set “00“ as a restricted number, then it will no longer be possible to make calls to foreign countries. For each mobile unit you can store up to 3 separate restricted numbers (each from 1 to 8 digits).
PAGE 133
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Locking Delete All Lock Numbers With this function all lock numbers are deleted. 1. In the non-active mode press the ß key and select “Service“ from the main menu. 2. In the service menu select “System settings“ and enter the system code (default setting 0000) (see also page 133).
PAGE 134
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Locking Blocking Unwanted Calls By entering up to three 16 digit call numbers you can determine, which subscribers you want to reach you. The calls of all subscribers that have different call numbers will not be put through to you. If the block is active, then it will be displayed on the mobile unit.
PAGE 135
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Locking Set Authorization for Subscribers By defining authorization for each registrated mobile unit you determine which internal subscriber is permitted to make external, toll calls. When delivered the device is capable of being used freely on outside lines. 1. Full external authorization(= default setting) The phone can be used for incoming and outgoing external calls. 2.
PAGE 136
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Locking Lock Mobile Unit / Hotline Number / Changing the Mobile PIN Using the menu “Telephone lock“ you can make additional settings for hotline numbers or mobile unit PIN numbers that will take affect with the mobile unit lock. a ß Telephone lock o Lock on Hotline No. Del.hotline No. Change PIN - - - - - - - - The mobile unit is in the non-active mode. Press. Main menu is displayed.
PAGE 137
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Introduction to Procedure for System Settings The following procedural schema represents the procedures for most system settings. After completing these procedures you will select the desired system setting from the menu. a The comfort mobile unit is in the non-active mode Station 2 TEL.
PAGE 138
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Setting the Connection Configuration for Internal Subscribers You can define which types of devices can be served on the subscriber connections in the system.
PAGE 139
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Ring Allocation for Door Intercom If you want to install a door intercom, you can define which internal subscriber should be called from the door intercom. This internal subscriber is then able to operate the door opener. 1. In the non-active mode press the ß key and select ”Service“ from the main menu. 2.
PAGE 140
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Ring Allocation on a Multiple Device Connection The setting of ring allocation stipulates: 1. On which mobile units or other devices using which multiple subscriber number external call number) an external call should be signal. 2.
PAGE 141
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Set / Change a Ring Allocation on a Multiple Device Connection Before you set the ring allocation, you need to store external call numbers on the multiple device connection (multiple subscriber number, MSN) (see also „Storing / Assigning Multiple Subscriber Numbers“ on page 93).
PAGE 142
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Ring Allocation: Set / Change Ring Count for Group Ring Using the ring count you can define the number of rings used to signal the first call group before the second call group is signaled. The default setting is three ring cycles. You can choose from 1 to 9 rings. After selecting ”MSN X“ (see above) the following menu is displayed: MSN X Use NEXT to scroll... No.
PAGE 143
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Setting Ring Allocation on a System Connection On a system connection the call assignment is automatic based on the assignment of the internal subscriber numbers from the system number. You do not need to make any additional setting.
PAGE 144
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit System Settings Deactivating Mobile Units Each mobile unit can be deactivated using any other mobile unit. a ß The comfort mobile unit is in the non-active mode. Press the F key; Main menu is displayed. Use NEXT to scroll the main menu... Service Phone Book Number redial Telephone lock NEXT OK until “Service“ is in the 1st line and then select “Service“ with OK. Scroll the next menu with NEXT.
PAGE 145
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Mobile Settings Settings a The mobile unit is in the non-active mode. ß Press the F key; Main menu is displayed. Scroll the main menu with NEXT... Settings Handset volume Tone ringing Display contrast Registrate Language Autom. backlight Multicell config Initialisation - - - - - - - Speaker volume until “Settings“ is in the 1st line and then select with OK.
PAGE 146
1054I-7A.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating the Comfort Mobile Unit Mobile Settings Activate / Deactivate Advisory and Warning Tones ß Press the F key; Main menu is displayed. Scroll the main menu with NEXT until... Tones Key click Batt.warn. tone Range tone Acknowledg tone Error tone Sync.tone ------------- Key click “Tones“ is in the 1st line and then select with OK. The menu for setting the tones is displayed (complete menu left).
PAGE 147
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Outgoing Calls Overview The operation procedures described below apply to installed non-cordless telephones. Other accessory device types, such as fax machines, BTX, or modems, can be operated in the same manner, provided they have a hand set or a phone key and key pad for dialing.
PAGE 148
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Incoming Calls Setting “Anonymous Call“ for the Current Call You can suppress the display of your call number for your communication partner only for the current call. (You will need to contract the “case-by-case suppression of the call number transmission“ from the Telekom). c 7467 0 o Lift hand set. Press these keys one after another. The suppression of the call number display is active for this call.
PAGE 149
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Incoming Calls Call Pick-Up You can answer external calls even when thy are not directed to your telephone. This situation can occur, for example, when an internal call forwarding function has been set, after a call has been forwarded internally. The requirement is that your telephone is assigned to a group and the call transferring function is active (default setting).
PAGE 150
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Switching Functions Set Internal Call Forwarding You can forward an external call, that was directed to you, to another internal subscriber. The call can only be forwarded to those subscribers that haven’t set any call forwarding definitions. c 79 1 o 1... 9 a Lift hand set. Press these keys one after another to forward the call internally.
PAGE 151
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Exchange Functions Consultation Call / Call Transfer With your ISDN system you have the ability to make both internal and external consultation calls, for example, to an external business associate. In general, the internal consultation call is made with the external consultation call with R 90 . R 99 keys and the Initiating an internall consultation call: b You have an external connection.
PAGE 152
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Exchange Functions Initiating externall consultation call: b 9 0 R o You have an external connection. Press these keys to place the call on hold. Press 0 to obtain an ISDN line. Enter the external call number. You hear the external ring, the subscriber answers. You speak with the subscriber. Completing the external consultation call, transferring the call: R 8 .
PAGE 153
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Exchange Functions Toggle When making a consultation call you can switch between the two connected calls as often as you wish. Toggle with a telephone using pulse dialing b 5 5 a You have a consultation call. Press the 5 to return to the original call. Press the 5 to return to the consultation call, etc. Replace the hand set to hang up on the consultation call partner. You will be called automatically.
PAGE 154
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Exchange Functions Activate External, Automatic Callback If you call someone externally whose line is busy, you can activate the “automatic callback“ function. As soon as the desired connection is free, you will be called back automatically. To use the automatic callback function, you must have contracted the ISDN service feature “automatic callback“ from the German Telekom AG.
PAGE 155
1054I-08.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operating Other Devices Exchange Functions Unparking a Parked External Call You can only unpark the parked external call on the same multiple device connection on which it was parked earlier. c 743 Lift hand set. Press these keys one after another to start the unparking function. o Press the number key to enter the park number. 7 Press the 7 key to unpark the call You can continue the call.
PAGE 156
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Step by Step Procedure In order to use Gigaset 1054isdn as a multicell system with no difficulty you should follow the following steps in the order that they are displayed below: 1 Read general overview Page 153 2 Install additional basw station on the same multiple device connection Pages 10 - 14 3 Registrate the mobile unit on the other base stations using the same internal number Standard Mobile Pg.
PAGE 157
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System General Overview Using the multicell system on Gigaset 1054isdn, you can make calls with mobile phones from multiple base stations. By positioning the Gigaset 1054isdn strategically you can also expand the area in which you can use your mobile unit. ● You can registrate and use your mobile unit on up to 4 base stations in Gigaset 1054isdn.
PAGE 158
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Possible Combinations You can install the base station in a number of different spatial combinations, depending on the number and desired operational range. You must take into consideration that when using a multiple device connection the maximum distance between the first and last base station is 150 meters. In the multicell system on Gigaset 1054isdn you can use a mobile unit on multiple base stations.
PAGE 159
1054I-09.FM 10.06.
PAGE 160
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Standard Mobile Unit Registrating a Standard Mobile Unit on Multiple Base Stations You can registrate up to 8 mobile phones on one base station. 1. The mobile unit must be turned off if needed, turn it off by pressing the u until the display goes blank. 2. On the base station on which you want to registrate: Press the registration key with a pointed object (for example, pencil, pen, etc.).
PAGE 161
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Standard Mobile Unit Base Station Selection Automatic / Manual / Combined When you operate multiple base stations, then you can define on which base station you want to operate your mobile phones. You have the choice between automatic, manual, or combined. The setting is made when the mobile unit is not active. 1.
PAGE 162
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Standard Mobile Unit Activate / Deactivate Base Station Number Display If the display is active, then the current base station number will be displayed. w§& Press these keys one after another. The previous setting will be displayed. 0or ! w 36 1 A C To activate press the 1 key, to deactivate press the 0 key. (default setting) Press the save key again. Display of base station number; here 1.
PAGE 163
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Standard Mobile Unit Allow / Suppress Change of Base Station during a Call You can registrate and operate the mobile phones on different base stations of the Siemens Gigaset-family. This includes non ISDN base stations. To prevent the switch of an active call to a non ISDN base station, you must define to which base station may be switched.
PAGE 164
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Standard Mobile Unit Switching to Another Base Station during a Call If you have installed a multicell system with at least two ISDN base stations, then you are able to switch the ISDN base station during an external call without having to interrupt the external call.
PAGE 165
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Comfort Mobile Unit Registrating the Comfort Mobile Unit on Multiple Base Station 1. On the base station: Press the registration key on the base station with a pointed object (e.g. pencil, pen), The registration key starts to blink. Registration key 2. After this, on the mobile component (within 1 minute): ß Settings Registrate NEXT Press the F key; Main menu is displayed.
PAGE 166
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System OK Comfort Mobile Unit Press OK to confirm the internal number. Current INT no.: 4 OK If needed, correct with OK Complete the registration procedure. The comfort mobile unit will display with which internal number it was registrated. Registrated with internal no. 4 Note: ● You can registrate your comfort mobile unit on up to 4 base stations. ● You can registrate up to 8 mobile phones on a base station.
PAGE 167
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Comfort Mobile Unit Base Station Select Automatic / Manual / Combined When you operate multiple base station, then you can define on which base station you want to operate your mobile phones. You have the choice between automatic, manual, or combined. The setting is made when the mobile unit is not active. 1.
PAGE 168
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Multicell System Comfort Mobile Unit Allow / Suppress Base Station Switch during a Call You can registrate and operate the mobile phones on different base stations of the Siemens Gigaset family. This includes non ISDN base stations. To prevent the switch of an active call to a non ISDN base station, then you must define to which base station may be switched.
PAGE 169
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operation with a Telephone System General Overview The Gigaset 1054isdn can be connected to and operated on Euro-ISDN subscriber connections using the DSS1 protocol. Generally, the multiple device connection is offered on the subscriber connection of the telephone system. Before installing Gigaset 1054isdn you should establish which installation features and which ISDN features can be used.
PAGE 170
1054I-09.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Operation Behind a Telephone System Example: Initiate consultation call with comfort mobile unit During a call you can establish a consultation call to another subscriber in the telephone system. Please observe the User Instructions of your telephone system. b You have a call... External 34567 CONSLT. CONSLT. Press the dialog key. You hear the dial tone. External Please dial TEL.
PAGE 171
1054I-10.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Acoustic Signals Advisory and Warning Tones External call beep beep 0.8s Tone Internal call 2s Pause beep beep 0.5s Tone 0.5s Tone 0.8s Pause Call from the door intercom tüüt beep beep beep 4.2s Pause beep tüüt beep 3 x 0.2s Tone and 0.3s Pause Call back/ Call return 0.8s Tone Internal dial tone beep beep 0.8s Pause beep beep beep 3 x 0.2s Tone and 0.3s Pause, repeats after 0.
PAGE 172
1054I-10.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 General Overview Maintaining the System To clean your base station and mobile component simply wipe it with a damp towel or antistatic cloth. Never use a dry towel (danger of static electric build-up).
PAGE 173
1054I-10.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 General Overview Trouble Shooting Not every problem is caused by a technical defect. You can save time and money if you can solve some of the simpler problems yourself. The following tips will help you.
PAGE 174
1054I-10.FM 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 General Overview Warranty Siemens AG will guarantee the operation of this device for 6 months after the date of purchase. Please keep your receipt as proof of purchase. During the warranty period Siemens AG will repair any defects that are the result of faulty parts or assembly. Siemens AG will decide whether to repair or replace a defective device.
PAGE 175
10.06.1999 1054IGLO.FM Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Glossary ADPCM Adaptive Delta Pulse Code Modulation A digital transmission procedure to copy an analog signal as a digital value and then to transfer the difference of these values.
PAGE 176
10.06.1999 1054IGLO.FM Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Glossary DSS1 Digital Symbol System No. 1 for the Euro-ISDN protocol DTMF Dual-tone multiple frequency procedure; fast analog dialing procedure The individual digits are dialed with dual tones Emergency number You can store up to 4 emergency numbers in Gigaset 1054isdn. You can dial the emergency number even when Gigaset is blocked. En-Bloc DialingThe entered call number is not dialed until the phone key is pressed.
PAGE 177
10.06.1999 1054IGLO.
PAGE 178
1054ISD.SIX 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Index Index A Accessories ................................................ 10 Acknowledgement tone Negative ............................................. 83 Positive ............................................... 83 Acoustic signals ....................................... 167 Advisory tones .................................... 83, 142 Allow base station switch ................. 159, 164 Anonymous answering .........................
PAGE 179
10.06.1999 1054ISD.SIX Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Index E Emergency number .................................. 172 Emergency numbers ................................ 127 En-bloc dialing .................................... 42, 102 Entrance telephone ...................... 59, 80, 151 Euro-ISDN .................................................... 8 Important information ........................... 9 External call ..............................................
PAGE 180
1054ISD.SIX 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Index Operation range limitation warning tone ....................................... 84 Operation range limitation warning tone .. 167 Operation type ............................................ 14 Operational range .............................. 12, 168 Outgoing calls ............................................ 41 P Parking external call ........... 55, 118, 150, 172 Partial external authorization ..............
PAGE 181
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide- Standard Mobile Unit In this section the most important settings and procedures are described briefly. Please see the specific chapters for a more detailed description of these functions and those not mentioned here. You will find the page numbers for the more detailed descriptions with each brief description.
PAGE 182
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide- Standard Mobile Unit Set ringer pitch (page 34) w & o Press these keys one after another w Select tone pitch with the number keys (1 ...
PAGE 183
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide- Standard Mobile Unit Set external automatic callback (page 59) w # $ (w When the called partner is busy, press these keys in this order to activate automatic callback. Internal consultation call during external call (page 51) ü Press internal key o e Dial internal call number.
PAGE 184
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide - Comfort Mobile Unit In this section the most important settings and procedures are described briefly. Please see the specific chapters for a more detailed description of these functions and those not mentioned here. You will find the page numbers for the more detailed descriptions with each brief description.
PAGE 185
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide - Comfort Mobile Unit Set ringer volume (page 94) ß Press menu key Settings OK Tone ringing OK Select after another and confirm Tonering.volume OK Select and confirm NEXT SAVE Set and save Set ringer tone pitch (page 94) ß Press menu key Settings OK Tone ringing OK Select in sequence and confirm Tonering.
PAGE 186
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide - Comfort Mobile Unit Store call number and name in telephone book (page 111) ß OK Phone book Press menu key Select and confirm Follow instructions in the display Dial call number from telephone book (page 105) TEL.BOOK NEXT Press dialog key Search for name DIAL Press dialog key.
PAGE 187
10.06.1999 KB- Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide - Comfort Mobile Unit Three way conference (page 117) CONF. With two active calls press the dialog key to link both calls to a three way conference. „Anonymous call“ , (Suppress the display of your call number for your partner, Pg. 106) ß Before dialing call number press menu key Service Select and confirm OK Anonymous call OK Select and confirm.
PAGE 188
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide - Accessory Devices In this section the most important settings and procedures are described briefly. Please see the specific chapters for a more detailed description of these functions and those not mentioned here. You will find the page numbers for the more detailed descriptions with each brief description.
PAGE 189
KB- 10.06.1999 Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Quick Start Guide - Accessory Device Answer “call waiting” second call (page 145) R 78 During a current call press the dialogue key to answer the calll waiting. Toggle (page 149): Telephones with pulse dialing 5 ... 5 To switch back and forth between active calls press the 5 key. Toggle (page 149): Telephone with tone dialing R 5 R ... R Press these keys after another Press the “R“ key to switch back and forth between to calls.
PAGE 190
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 1054I-RU.FM Published by the division: Private Communication Systems Factory for Telephone Terminals Kaiser-Wilhelm-Straße 56 D-46395 Bocholt © Siemens AG 1997 Delivery options and technical changes possible. Order No. A30853-X200-B101-51-7619 Printed in Germany (03/97) Siemens Aktiengesellschaft U6 Besonders umweltfreundliches Papier 50% Recyclinganteil 50% chlorfrei gebleicht 10.06.
PAGE 191
10.06.1999 1054I-RU.FM Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619 Note Page Leerseite, die ggf.