Technical data

69
1054I-06.FM
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
10.06.1999
Operating the Standard Mobile Unit Locking
By entering up to three 16 digit call numbers you can stipulate which subscribers can call you. The calls
of all subscribers that have different call numbers will not be put through to you. If the block is active,
then it will be displayed on the mobile unit.
This block will not work, when the caller has suppressed the call number transmission to you (see Glos-
sary, beginning on page 171) or when the call is coming from a non ISDN subscriber.
If no call numbers are programmed, then no calls will be accepted.
For better control we recommend that you activate the call number display.
Store / verify the call numbers for blocking undesired calls
w#$%
Press these keys one after another.
z To search the call numbers, push the
redial key repeatedly.
Slot number 2 is empty here.
0...) Enter the call number for slot number
2 for the calls that will be accepted.
Enter additional call numbers:
z To scroll through press the redial key. All
call numbers can be defined and
entered as part of one process.
.
w Press the save key.
The call numbers are now stored.
Activate / deactivate the blocking of undesired calls
w#$$
Press these keys one after another
the actual settings are displayed
=
or
1
To activate press the 0 key,
To deactivate press the 1 key.
w Press the save key.
The defined block against undesired
calls will be displayed with an “A“ after
you press ü.
Blocking Undesired Calls
A
C
D
45
A
C
D
1 123456789012 3
A
C
D
2 z
A
C
D
2 78901234
A
C
D
3 z
C
A
C
D
44 0
C
D
G
A