User guide

ManualsBrandsSiemens ManualsConsumer electronicsGigaset 3070 isdn

Connecting a PC to the base station

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Step

Operating Gigaset talk&surf with Windows 98, Win ME

Registering Gigaset M105 Data at Gigaset 3070/3075isdn

Proceed as follows:

1. Install Gigaset M105 Data

2. Start the Gigaset M105 Data configuration program via

> Start > Programs

>Gigaset M100 Data >Gigaset Setup

3. Select the window "

Local adapter

“, a free registration location is selected.

4. Check that your Gigaset M105 Data has been set to the type

Portable part

(default).

5. Set the Gigaset 3070/3075isdn to registration mode (press LED).

6. Click the

button and enter the PIN of the partner station (default

0000).

7. Click

. The registration procedure starts and the message "

If the re-

quired base is ready for registration, the local adapter logs on. Check that

the base is ready for registration.

" appears on the screen.

The two devices are automatically synchronised. An entry now appears in

the

Registered adapter

list.

8. Close the program with

9. Restart your computer.

Once Gigaset M105 Data has been installed, the telephony driver for

your Gigaset 3070/3075isdn has to be updated. You have three op-

tions here:

1. You have not yet operated your Gigaset 3070/3075isdn on your PC via

the USB cable:

You must follow the instructions in the sections "PC connection via

USB" and "Installing Talk&surf Software" in the PC installation instruc-

tions provided with Gigaset 3070/3075isdn. When asked which port

is to be used for accessing Gigaset 3070/3075isdn, specify the virtual

COM port for Gigaset M105 Data.

2. You have operated Gigaset 3070/3075isdn on your PC via the USB ca-

ble before:

Install the talk&surf software again. Start the installation procedure for

the talk&surf software and when asked which port is to be used for

accessing Gigaset 3070/3075isdn, specify the virtual COM port for Gi-

gaset M105 Data

and continue with the installation.

3. You have operated your Gigaset 3070/3075 isdn on your PC via the

USB cable before and you are an experienced PC user:

Reset the telephony driver by selecting the following:

> Start > Set-

tings > Control Panel > Telephony

. Select the

Telephony Drivers

tab

here. Then select the

DECT/ISDN TAPI Service Provider

and click on

Configure

. Click on

Port

, then on

Serial

and select the virtual COM

port for Gigaset M105 Data (see footnote on page 15). Confirm twice

with

and then