Operation Manual

13
Connecting the base station
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
inbetriebnahme.fm
21.2.02
Step
by
Step
Connecting the base station
V
S
0
socket: insert in the ISDN connection cable until the plug locks into place.
Insert in the ISDN connection cable in the ISDN socket until the plug locks into
place.
In the case of NTBA with self-assembly, insert the cable between the NTBA
and the Mini-Western socket until both plugs lock into place.
$
socket: Insert mains connection cable until the plug locks into place, and
insert in the socket.
For PC connection only:
Insert the USB connection cable into the base station, but do not connect to
the PC yet. Do not connect the USB connection cable until prompted to do so
by the PC program’s talk&surf Assistant on the PC.
Power failure:
In the event of a power failure, your base station, the handsets which are
registered at it and any corded terminals are not operational. All settings and
saved information (messages, directory entries) are retained for an unlimited
period.
Profiset talk&surf:
It is not possible to install Profiset talk&surf and Gigaset talk&surf
simultaneously on the same PC. Otherwise, problems will occur as both
programs attempt to access the same interface. You must therefore choose
either Gigaset talk&surf or Profiset talk&surf. When upgrading, the old
program version must first be uninstalled.
1.
2.
3.
4.
5.
Device front
Figure schematically
1.
2.
3.
4.
Only the plug-in power supply unit provided should be used (see
underside of base station).
5.
Info