Operation Manual

20
Ring delay per incoming MSN
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
isdn.fm
21.2.02
Step
by
Step
You can use the MSN next call feature by allocating two MSNs to the handsets
11 and 12 and switch to the MSN 22222 for this dialling procedure in the
process. This is not possible for handsets 13 and 14 as an alternative MSN was
not set up.
Answering machine (AM) 1 was allocated to business use and AM 2 to
personal use.
Ring delay per incoming MSN
Using the ring delay feature you can configure a handset for each individual
incoming MSN to delay response to the call signal. However, during this ring
delay time the Comfort handset can accept the call using the "call pickup"
function without a call signal queuing. When this feature is being configured,
the time allowed by the answering machine for recording a message (default:
Automatic 2/4) must be taken into account. When the ring delay that has been
set is higher than the setting on the active AM, there is no call signal as the
answering machine accepts the call beforehand. Setting ring delay see
page 32.
Personal 44444 13, 92 2 44444 ---
55555 14, 92 2 55555 ---
Use Incoming
MSN
Where
does it
ring?
Answering
machine
Outgoing
MSN
Set MSN for
next call