Operation Manual

30
Restoring the factory setting
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
System.fm
21.2.02
Step
by
Step
Restoring the factory setting
You can choose the settings that are to be restored:
●
Operational – All MSNs and prefixes (exchange codes) are deleted and the
AM PIN (for Gigaset 4175isdn only) is set to 0000.
●
Reset all – All functions are reset to the default settings. The system PIN is
reset to "0000". All entries (missed calls list, costs) are deleted.
For both functions: Before resetting, you must deactivate all active call for-
warding settings. Remote control of the answering machine is disabled. The
handsets remain registered.
Press
G
for selection menus.
Select using [
Á
] and [OK]: Base Settings
→ Settings →
System settings
→
Spec. function
→
Factory setting.
Confirm with [OK].
Enter the system PIN and confirm with
[OK].
Operational is displayed. Confirm with [OK].
Acknowledge the message
Settings
reset
and wait for the confirmation tone.
or Select using [
Á
] Reset all and confirm with [OK].
Answer [YES] to the question
Reset
factory
defaults?
Confirm the message Reset all and wait for the confirmation tone.
Querying the status
You can query the status of the following settings:
●
Callback
●
Withhold no.
●
Call forwarding
●
Ext.occupations
●
AB1, AB2, AB3
Press
G
for selection menus.
Select using [
Á
] and [OK]: Base Settings
→
Status
Press [OK] to open the status list
(
9
before an item = system function active).
Info
1.
2.
3.
4.
5.
5.
6.
1.
2.
3.