Operation Manual

49
Entering, changing or deleting SMS centre numbers.
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
sms.fm
21.2.02
Step
by
Step
Before you can send an SMS message to register and deregister with any other
SMS centre, you must first enter and activate the call number of this SMS cen-
tre (see next section).
After registering or deregistering do not forget to reactivate the call number of
the SMS centre you want to use for sending SMS messages (see pa ge49).
Entering, changing or deleting SMS centre numbers.
You can enter up to 10 SMS centres.
Before making or changing an entry, make sure you are fully informed about
special conditions and services offered by the SMS service provider.
Press
G
for selection menus.
Select using [
Á
] and [OK]: Base Settings
→
Settings
→
Service centres (the list
of call numbers appears).
Select using [
Á
] and [
W
]: <empty> or existing call number.
Select using [
Á
] and [OK]: Edit entry.
Enter call number and confirm with [
W
] .
Select using [
Á
] and [OK]: Save entry.
or Press [
Á
] and [OK] to select: Delete entry SMS centre is deleted.
If you are running your Gigaset 4170/4175isdn on a telephone system, you may
have to enter a prefix (exchange code
*
) before the number, depending on the
configuration of your telephone system.
In this case, you should contact the vendor to find out whether your telephone
system places the prefix before the number when transmitting the number
(CLIP) to the Gigaset 4170/4175isdn. If you cannot obtain any information, you
can find out whether or not you need to add a prefix by trial and error, (sending
an SMS see page 50).
Activating/de-activating an outgoing SMS centre
The required SMS centre must be activated in order to send SMS messages. In
this way, you specify the SMS centre through which the SMS messages are to be
sent. SMS messages may be received through all the SMS centres registered pro-
vided you have identified yourself as a connection with SMS capability beforehand
by following the appropriate registration procedure (see next chapter).
Press
G
for selection menus.
Select using [
Á
] and [OK]: Base Settings
→
Settings
→
Service centres (the list
of call numbers appears).
Select using [
Á
] and [
W
]: desired call number.
Select using [
Á
] and [OK]: Serv.centre on? The display changes to Send off?
The SMS centre is activated. The call number of the sending centre is marked
with
9
.
or Select using [
Á
] and [OK]: Send off? SMS centre is deactivated.
If you have not activated an outgoing SMS centre, you cannot send any SMS
messages, but you can receive SMS messages from all the registered SMS
centres.
1.
2.
3.
4.
5.
6.
4.
Info
* The number you use to seize a trunk line, generally "0".
1.
2.
3.
4.
4.
Info