Operation Manual

51
Writing, saving and sending SMS messages
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
sms.fm
21.2.02
Step
by
Step
Press [OK] to select: Send Text
Enter recipient’s number (destination number). Even for the local network, the
number must always include the area code (prefix). In the case of numbers
with an international prefix, "00" must be entered. Entering "+" is not permitted.
or Press [
©
] to open the menu and then press [
Á
] and [OK] to select: No.from
dir..
Select the required entry and press [OK] to confirm. The number is accepted.
If you have stored this number with a prefix in your telephone book, it must be
deleted to send an SMS.
Press [
©
] to open the menu.
Press [OK] to select: Press Send and
a
.
SMS is transmitted, the SMS centre automatically inserts your connection
number as the source address.
●
If you receive a phone call or an SMS message while you are writing or send-
ing an SMS message, your message will be saved in the outgoing messages
list. You can pick up the call and write or send your SMS message later on.
●
SMS messages which cannot be sent after several attempts are marked
with an error code and saved in the list of incoming messages (see your net-
work provider's error code list).
●
You can find out from the SMS service of your network provider whether an
SMS message has been delivered or not.
●
If there is a power cut, all settings and saved SMS messages are preserved.
2.
3.
3.
4.
5.
Info