Operation Manual

65
Automatic notification via SMS
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
Anrufbeantwort-
21.2.02
Step
by
Step
Automatic notification via SMS
Your Gigaset 4175isdn can automatically send you an SMS message to an ex-
ternal call number when a new message is recorded on the answering ma-
chine. This SMS message will say, for example:
"New message: 01712205625 for office 78581312 at 18:27 hours on THUR,
19.07. You have a total of 2 new AM messages".
Entering, changing destination number
Select using
G
and [OK]: Voice mail
→
(desired AM)
→
Settings
→
SMS notificat.
Press display button [
W
]: Go into additional menu.
Select using [
Á
] and [OK]: Change number.
Press display buttons:
X < >
and enter digits to change number.
Press display button [
W
]
→
Save entry and [OK].
Deleting destination number
Select using
G
and [OK]: Voice mail
→
(desired AM)
→
Settings
→
SMS notificat.
Press display button [
W
]: Go into additional menu.
Select using [
Á
] and [OK]: Delete number.
Activate/deactivate SMS notification
Select using
G
and [OK]: Voice mail
→
(desired AM)
→
Settings
→
SMS notificat.
Press display button [
W
]: Go into additional menu.
Select using [
Á
] and [OK]: Activate?
or Select using [
Á
] and [OK]: Deactivate?
Remote control of the answering machine
You can control your answering machine from any registered handset or exter-
nally, e.g. listening to and deleting messages. The same procedures apply for
both remote control functions, the only difference is the way in which remote
control is activated. For remote operation you need to modify the answering
machine PIN (factory setting: 0000) to ensure maximum security. To ensure
full functionality for this type of operation, remote control and remote delete
must be enabled.
Modifying the answering machine PIN
Your Gigaset 4175isdn is delivered with the answering machine PIN 0000.
Select using
G
and [OK]: Voice mail
→
(desired AM)
→
Settings
→
Change AM-PIN.
Enter the new AM PIN (ma x . 8digits) and confirm with [OK].
Repeat the new AM PIN and confirm with [OK].
If you make a mistake when entering the PIN, you can delete the entry
using the
X
key and enter the correct PIN.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
3.
1.
2.
3.
Info