Operation Manual

79
Operation with the entrance telephone
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
Tuersprechstelle.fm
21.2.02
Step
by
Step
Operation with the entrance
telephone
Configuring the entrance telephone
Press
G
for selection menus.
Select using [
Á
] and [OK]: Base Settings
→
Settings
→
Setup user
→
Setup device.
Select using [
Á
] and [
W
]: (desired internal subscriber 21 or 22).
Select using [
Á
] and [OK]: Device type
→
Door type1
*
.
or Select using [
Á
] and [OK]: Device type
→
Doortype2(DTMF)
**
.
Setting codes for entrance telephone "Door type 2 (DTMF)"
For entrance phones controlled by DTMF codes you can set various codes.
Please read the instructions for this entrance phone!
Press
G
for selection menus.
Select using [
Á
] and [OK]: Base Settings
→
Settings
→
Setup user
→
Setup device.
Select using [
Á
] and [
W
]: (desired internal user 21 or 22).
Setting door opener code
Select using [
Á
] and [OK]: Door code.
Enter code (factory setting = #9) and confirm [
W
].
Select using [
Á
] and [OK]: Save entry.
Setting collective call code
Select using [
Á
] and [OK]: Hunt group code.
Enter code (factory setting = 8) and confirm [
W
].
Select using [
Á
] and [OK]: Save entry.
Setting connect code
Select using [
Á
] and [OK]: Connection code.
Enter code (factory setting = 9) and confirm [
W
].
Select using [
Á
] and [OK]: Save entry.
Setting disconnect code
Select using [
Á
] and [OK]: Release code.
Enter code (factory setting = #0) and confirm [
W
].
Select using [
Á
] and [OK]: Save entry.
1.
2.
3.
4.
* This configuration is only applicable for entrance telephones in accordance with FTZ
(door opener via ring current).
4.
** E.g. Deutsche Telekom DoorLine products
1.
2.
3.
4.
5.
6.
4.
5.
6.
4.
5.
6.
4.
5.
6.