Operation Manual

18
Grep-eng_2-0.fm
20.10.15
Gigaset Repeater 2.0, IM: A31008-N602-R101-2-SU19
Miscellaneous
Troubleshooting
Technical data
Problem Cause Action
Left LED flashes continuously
when the registration procedure
has been concluded
No radio connection to the base
station
Repeat registration
Left LED flashes continuously at a
selected location
No radio connection to the base
station
Select a new location
Left LED does not light up at all Power supply off Check the power point
No reception of the handset in
the area of the repeater
Repeater not registered
No radio connection to the base
station
Handset cannot find the repeater
Repeat registration
Select a new location
Switch handset on and off
Right LED lit constantly Base station has not been
prepared for repeater operation
Check the preconditions and pre-
paratory steps required by your
base station for registering a re-
peater. Then repeat these steps to
register the repeater.
No registration of additional
repeaters possible with encryp-
tion activated
Maximum number of repeaters
that can be connected to the base
station has been reached
De-register repeaters that are no
longer required using the repeater
de-registration procedure de-
scribed in the user guide or system
menu of your phone.
If you need more repeaters to relay
the base station, please note that
you can run up to 6 repeaters, if en-
cryption is deactivated.
To deactivate encryption, all regis-
tered repeaters 2.0 must first be de-
registered. You can then deactivate
encryption and register your re-
peaters again.
Standards: Compatible with DECT, GAP
Radio frequency range: 1880 MHz - 1900 MHz
Transmit power: 10 mW average power per channel
Range: max. 300 m outdoors
max. 50 m in buildings
Power supply: 230 V, 50 Hz (plug-in power unit)
Power consumption: Standby: 0.7 W
During call: 0.9 W
Acceptable environmental conditions: 0 °C to + 45°C
Dimensions (mm): 131 x 111 x 50 (LxWxH)
Weight: 154 g
Power cable length: approx. 1.8 m