s *LJDVHW 3070/75 L V G Q Published by Information and Communication Mobile Group Hofmannstr. 51 D-81359 München © Siemens AG 2001 All rights reserved. Subject to availability. Right of modification reserved. Printed in Germany (01/01). Siemens Aktiengesellschaft http://www.siemens.com/gigaset Order. no.
Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Sicherheitshinweise 09.01.01 Safety precautions Step by Safety precautions Step ● Install only in covered areas with a temperature range of +5°C to +45°C. ● Do not install in bathrooms or shower rooms. ● Sensitive electronic equipment may be affected. ● When disposing of the base station, the relevant environmental protection guidelines must be observed.
Übersicht_U3.fm Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 09.01.01 Brief overview - Gigaset 3000 Comfort handset display is protected by a plastic film. £The This protective film should be removed before use.
Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Übersicht_U3.fm 09.01.01 Softkeys and symbols of the Gigaset 3000 Comfort and Gigaset 3000 Classic Softkeys Symbols + - Make an internal call - Hold call µ Battery run down + warning tone [ Open redial list Battery charged to 1/3. Flashes during the charging process. , 1. This symbol appears if the missed calls list contains new messages or entries. 2. Press the softkey to call up new messages or the missed calls list.
Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Contents giga3070IVZ.fm 09.01.01 Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . II Brief overview - Gigaset 3000 Comfort handset . . . . . . . . . . . . . 3 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting the base station . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 giga3070IVZ.fm 09.01.01 Contents System settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Configuring music-on-hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Entering long-distance codes . . . . . . . . . . . . . . . . . . . . . . . . . . Restoring the factory setting . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 giga3070IVZ.fm 09.01.01 Contents Recording memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Listening to messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Listening to memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting messages and memos . . . . . . . . . . . . . . . . . . . . . . . . Modifying settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 giga3070IVZ.fm 09.01.01 Contents Menu Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Comfort handset menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Getting started Getting started Step by Step Connecting the base station 21 22 4. 1. 5. 3. 2. 1. V socket: insert in the ISDN connection cable until the plug locks into place. 2. Insert in the ISDN connection cable in the ISDN socket until the plug locks into place. 3. In the case of NTBA with self-assembly, insert the cable between the NTBA and the TAE (old telephone socket) until both plugs lock into place. 4.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Getting started Connecting supplementary devices Step by Step 21 22 Connection for the corded terminal with the internal number 21 Connection for the corded terminal with the internal number 22 The connections are designed for use with most commercial terminals. Schematic diagram Registering handsets Press this green illuminated key Registering the new Gigaset 3000 Comfort handset or 1.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Getting started Registering the Gigaset 3000 Classic handset Step by Step 1. Switch on the handset with a long press on the¯ key. 2. Press ® x { in sequence. Enter the base station number, generally 1, and confirm with 1. symbol initially flashes, but then remains steadily lit when the connecThe tion to the base station has been established. 3. 4. 5. 6.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Step Connecting a PC to the base station Gigaset talk&surf is a driver software which prepares your PC for Internet access via Gigaset 3070/75isdn. More information is contained on the CD provided with the program. Gigaset talk&surf requires Windows 98 or higher as its operating system.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step Under Diagnosis you can view the driver assignment to the COM port.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Via the "General" tab and Properties, you can view the default settings for the COM port. Step USB function To connect a PC via the USB interface, you will need Windows 98 or later or Windows ME. Windows 95 and Windows NT 4.0 do not support USB.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Step Representation of file names in Windows Explorer In Explorer you can define the format for displaying files under > View > Options. In these operating instructions it is assumed that a full path name is used, i.e. with a different configuration, the extension after the dot is not included: update.exe becomes update.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Updating Gigaset 3070/3075isdn Step by This section tells you how to download a new version of the firmware for your Gigaset 3070/75isdn from the Internet and then how to install it in the base station. You can use this function to install new features on your base station as soon as they become available in the Internet.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Step Assigning the COM ports to the devices A PC is equipped with a number of different ports to enable it to communicate with other devices. The most common ports are the following: The USB port COM 1 - 2, on the hardware side COM 3 - etc. virtual, i.e.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Step Operating Gigaset talk&surf with Windows 98, Win ME Registering Gigaset M105 Data at Gigaset 3070/3075isdn Proceed as follows: 1. Install Gigaset M105 Data 2. Start the Gigaset M105 Data configuration program via > Start > Programs > Gigaset M100 Data > Gigaset Setup. 3. Select the window "Local adapter“, a free registration location is selected. 4.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Step * You can find out which is the virtual COM port for Gigaset M105 Data either by starting the program Gigaset Setup and view the COM port in the Connection tab. (It may take a few seconds for this to be displayed correctly) or you could select > Start > Settings > Control Panel > System, then click on the Device Manager tab and select the ports there (COM and LPT).
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Connecting a PC to the base station Step by Step Updating Gigaset M101 Data for operation with Gigaset 3070/3075 Before you begin, make sure Gigaset M101 is already connected to the PC, the configuration program is loaded, and the COM port is set correctly. The firmware version must be ≥ 2.048. This software can be downloaded from http://www.ic.siemens.com/mySiemens/full/.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Getting into the ISDN world is easy Step by Step Getting into the ISDN world is easy Programming the various MSNs (your telephone numbers) for your Gigaset 3070/3075isdn is easy. What is an MSN MSN stands for multiple subscriber number. You can apply for a maximum of ten different telephone numbers for the ISDN multiple device connection.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Getting into the ISDN world is easy Step by Step You can use the MSN next call feature by allocating two MSNs to the handsets 11 and 12 and switch to the MSN 22222 for this dialling procedure in the process. This is not possible for handsets 13 and 14 as an alternative MSN was not set up. Answering machine (AM) 1 was allocated to business use and AM 2 to personal use.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 The Installation Assistant (Comfort handsets only) The Installation Assistant (Comfort handsets only) Step by Step The Installation Assistant can be called up any time to help you set the most important functions. The following settings can be completed in sequence: ● Date and time ● Own call number (MSN) ● Device type (e.g.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 The Installation Assistant (Comfort handsets only) Setting the device type Step by [ Telephone ] is preset for the analog connections Internal 21 and Internal 22. You can make and receive calls once a telephone is connected. If you connect an additional corded device (e.g. fax), the device type must be modified again accordingly.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Configuring ISDN call numbers (MSNs) Configuring ISDN call numbers (MSNs) Step by Step You can configure up to 10 own call numbers (MSNs) at your base station. In this way callers can dial internal subscribers directly. As the costs for each call number are recorded individually, telephone charges for outgoing connections can also be calculated separately.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Configuring ISDN call numbers (MSNs) Assigning an outgoing MSN Step by Step 1. Press for selection menus. 2. Select using [] and [OK]: Service Set up → Settings → Set up user → Set up device. Select using [] and [ ]: (required internal subscriber). Select using [] and [OK]: Send MSN → (required MSN). 3. 4.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Locking/unlocking ISDN features Locking/unlocking ISDN features Step by Step Conducting a call externally or via a second B-channel 1. 2. With this setting you can define whether enquiry calls are held via the provider (externally), or in the base station (via a second B-channel)*. Press for selection menus. Select using [] and [OK]: Service Set up → Settings → ISDN settings → Int. Enq. Call or Ext. Enq.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Locking/unlocking ISDN features Setting external/internal enquiry calls Step by Step 1. 2. or 2. 3.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 System settings System settings Step by Step Configuring music-on-hold The caller hears music-on-hold when put on hold by the base station rather than the exchange (e.g. in the case of internal transfer). The following settings can be selected: Internal Integrated default melody Off Music-on-hold via connection 21 or 22. This menu item only appears if "Ext.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 System settings Entering long-distance codes Step by In order to display national and international calls correctly and return them without problems, you must ensure that long-distance codes are set properly. By default: Step ● national = 0 ● international = 00 1. 2. 3. 4. 5. 6. Press for selection menus. Select using [] and [OK]: Service Set up → Settings → ISDN settings → Lg.-dist.digits.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Making comfort calls Step by Step The abbreviations in brackets after the titles stand for the corresponding ISDN feature. Some features can only be used if enabled by the provider (additional charge). Making internal calls free of charge If you have several handsets or supplementary devices, you can make internal calls free of charge. 1. Press [INT]. Your internal call number is displayed. 2.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Ring delay Step by Using the ring delay feature you can configure a handset for each individual MSN to delay the response to the call signal. However, during this ring delay time the handset can accept the call using the "Accept?" function without a call signal queuing.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Toggle Step by With the toggle feature, you can switch between an active and inactive connection. The active connection is put on hold. Step 1. 1. 2. You can switch between called parties with [] and []. Ending an enquiry call/toggle Press for the menu. Select using [] and [OK]: End. You are reconnected with the subscriber on hold.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Entering numbers in the telephone directory Step by During a call, you can enter the number of the other party in the telephone directory, or add his/her name and then call them from the telephone directory. Step 1. 2. 3. Press for the menu. Select using [] and [OK]: Directories → Copy to Dir. Press [OK].
giga3070KAP.fm Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 09.01.01 Making comfort calls Missed calls Step by Calls which are not answered are automatically entered in the list. This can contain up to 40 entries. Calls which do not include a calling number are not entered in the list. An entry (for each MSN) is displayed to all handsets with the same MSN assignment and is updated on request.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Internal call forwarding Step by Step Configuring a forwarding destination 1. Press for selection menus. 2. Select using [] and [OK]: Service Set up → Int.forwarding → Forward. dest. → (required internal subscriber). Only one forwarding destination can be selected for internal call forwarding.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Modifying entries Step by Step 1. Press for selection menus. 2. 3. Select using [] and [OK]: Service Set up → Ext. Call Forw. Select using [] and [ ]: (required call forwarding). 4. 5. Enter the required destination call number and confirm with [ 6. or 7. 7. 9 Select using [] and [OK]: Edit entry → Immediately, On busy or On no reply. 9]. Select using [] and [OK]: Save entry.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Automatic external callback on busy CCBS Step by You set up an external call. The number you have dialled is busy or the subscriber does not answer and the softkey [CALLBCK] is shown on the display. Step Activating callback 1. To activate callback confirm the softkey [CALLBCK]. 2. Wait for confirmation from the exchange and press ¯.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Holding calls Step by Step Putting external subscribers on hold You are conducting an external call. or 1. Press [INT]: The external subscriber is put on hold. The waiting external subscriber hears music-on-hold. You can conduct an internal enquiry call. 2. As soon as the internal subscriber ends the enquiry call, [BACK] appears on the display for 10 seconds.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Calling line identification restriction (CLIR) Step by If you withhold your number from other parties, you can activate the calling line identification restriction. This can be set on a temporary or permanent basis. Step Temporary calling line identification restriction 1. Press for selection menus. 2. Select using [] and [OK]: Service Set up → Call preparat. → Temp. withhold.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Making comfort calls Tracing switch Step by If you find yourself the target of malicious callers, it is possible to trace the caller ID from the central office. Step This service can only be used if it has been activated for your connection. Further information can be obtained from your network provider. During or immediately after the call You have received a malicious call from an anonymous caller.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 System functions System functions Step by Step These descriptions apply to the Gigaset 3000 Comfort handset. See the abbreviated description "Registering a Gigaset 3000 Classic handset" on page 57. Missed calls list The missed calls list contains the telephone numbers (max. 32 digits) of unanswered calls together with the date, time and number of call attempts.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 System functions Copying telephone directory entries Step by If you have registered two or more Gigaset 2000C/3000 Comfort devices (with telephone directory entries), you can copy all or part of the telephone directory from one handset to another. Please refer to the operating instructions for your Gigaset 2000C/3000 Comfort. Step Configuring an external destination call number for the room monitor 1. 2. 3. 4.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 System functions Entering an automatic start/end time for night service Step by Step 1. 2. 3. 4. Press for selection menus. Select using [] and [OK]: Service Set up → Night Service → (required MSN) → Start time or End time. Enter start time or end time (4 digits) and confirm with [ ]. Select using [] and [OK]: Save entry. 9 Activating/deactivating all-day night service for Saturday/Sunday 1. 2.
giga3070KAP.fm Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 09.01.01 System functions Activating/deactivating charge display for the previous call Step by With Gigaset Comfort/Classic telephones, pressing the D key lets you display the costs/units accumulated for the previous call at the telephone. Step 1. 2. 3. 4. Press for selection menus. Select using [] and [OK]: Service Set up → Settings → System settings → Cost/duration. Enter the base PIN and confirm with [OK].
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 System functions Step by Step 1. 2. 3. 4. 5. 6. Setting units Press for selection menus. Select using [] and [OK]: Service Set up → Settings → System settings → Cost/duration. Enter the PIN and confirm with [OK]. Select using [] and [OK]: Access type. Select using [] and [OK]: Units/Costs. If the calculation type "Price per unit:" was active when the units were set, a prompt is displayed.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Answering machine (3075isdn only) Step by Step Gigaset 3075isdn includes an answering machine (AM) which can be used for three call numbers. Up to three MSNs can be assigned to the answering machine. This means you can avail of three separate answering machines. However, an individual MSN cannot be assigned to more than one answering machine at a time.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Recording/modifying announcements Step by Step 1. 2. 3. 4. A total of 4 announcements can be recorded: ● Announcement 1 ● Announcement 2 ● Announcem. only ● Concl.Announcem Press for selection menus. Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Announcements. 9 Select using [] and [ ]: (required announcement). Select using [] and [OK]: Record. 5. 6.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Listening to messages Step by You can access new messages directly using the letter symbol [ handset. Step ,] on the You can call up all saved messages as follows: 1. Press for selection menus. 2. Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Messages → New Messages or All Messages. Select using [] and [OK]: Playback begins immediately.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Modifying settings Step by Step Defining the number of rings 1. 2. Factory setting: automatic 2/4. In this case the answering machine operates as follows: if there are no messages, the announcement is activated after 4 ring cycles; if messages have already been left, the announcement is activated after 2 cycles.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Modifying the answering machine PIN Step by Step Your Gigaset 3075isdn is delivered with the answering machine PIN 0000. 2. Press for selection menus. Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Settings → Change AM-PIN. 3. Enter the new AM PIN (max. 8 digits) and confirm with [OK]. 4. Repeat the new AM PIN and confirm with [OK].
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Setting a timer Step by You can control your answering machine with a timer function. A start time can be defined for each announcement. You can also implement timed announcement control for weekends and/or weekdays, and select a specific announcement in each case. Step Example: A company has an emergency service outside of regular business hours.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Remote control of the answering machine Step by You can access and control your Gigaset 3075isdn answering machine from any external telephone or registered handset. The same procedures apply for both remote control functions (local and remote), the only difference is the way in which remote control is activated.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Answering machine (3075isdn only) Step by Step Key sequences for remote control Once you have commenced remote control for the answering machine, each key has the same function, regardless of the telephone model. Spec.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Security settings Security settings Step by Step Change system PIN The base PIN (Personal Identification Number) protects all your system settings against unauthorized modifications. You Gigaset 3070isdn/3075isdn is delivered with the PIN 0000. 1. Press for selection menus. 2. 3. Select using [] and [OK]: Service Set up → Settings → Security. Enter the base PIN (factory setting:0000) and confirm with [OK]. 4. 5.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Security settings Emergency numbers Step by Two or three emergency numbers (country-specific) are entered at the base station. Five additional emergency numbers can be added to the following positions. The first position in the list is assigned the Siemens Hotline for your Gigaset 3070isdn/3075isdn as standard. This preset can be overwritten. Step Configuring new emergency numbers 1. 2. 3. 4. 5. 6. 7. 8.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Appendix Appendix Step by Step Centrex features CENTREX (CTX) is the name of the virtual ISDN PABX. To allow the full range of features to be used, you can also activate the keypad protocol for switching, in addition to the standard dialling procedures. CENTREX features can only be utilised by subscribers in a CENTREX group.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Appendix Activating automatic ECT (Explicit Call Transfer) Step by With some ISDN systems, the original caller and the party called for enquiry purposes cannot be connected simply by hanging up. Step In this case, you must activating this function. Please refer also to the operating instructions for your PABX. 1. Press for selection menus. 2.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Appendix Using the keypad protocol Step by Under CENTREX, the keypad protocol enables additional services from other providers to be used, e.g voicemail or announcement services. Step Contact your provider for more information on keypad control. Activating/deactivating automatic keypad switchover Pressing ’*’ and ’#’ automatically switches the system over to the keypad protocol.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Operation with other devices Step by Step For information on operation and call number assignment, please refer to ”Registering other devices“ on page 7. Registering a Gigaset 3000 Classic handset ® x { [OK][OK] ,
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Registering cordless Gigaset 1000TAE Step by The cordless Gigaset 1000TAE allows analog terminals e.g. telephones, fax machines or answering machines to be operated cordlessly from your base station. Step 1. 2. The base station system PIN must be set to "0000" before the device is put into operation, see "Change system PIN" on page 52. Press the green illuminated key on the base station.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Defining device authorizations Step by It is possible to set different authorizations for all registered devices: Step 1. 8QUHVWULFWHG (Default setting) All devices can accept incoming calls and make outgoing external/internal calls. 2. ,QFRPLQJ RQO\ The devices can only accept incoming calls. External calls cannot be made, apart from those to emergency numbers. 1. 2. 3. 4. 3.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Making calls Step by Activating/deactivating automatic line seizure Step With automatic line seizure, the trunk line is seized immediately when the handset is lifted. Normal internal dialling is thus no longer possible. By pressing the [ ] key, however, an internal call can be made by means of an internal enquiry. This call is conducted via the trunk.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Step Making calls with a corded telephone at the TAE connection by Step Dialling internal and external numbers Dialling internal numbers Lift the handset and dial the internal number. This is possible only if automatic line seizure is deactivated (see page 60). The procedure for calling all internal subscribers simultaneously by means of a collective call is described on page 63.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Step by Step Internal collective call If there are several internal subscribers registered at the base station, you can call all of them simultaneously by means of a collective call. This is possible only if automatic line seizure is deactivated (see page 60). / Lift the handset. All registered handsets are called. # You are connected to the first subscriber that answers the collective call.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Toggling between two callers Step by Step # While engaged in an external call, you receive a second external call. 4 Press this key to toggle between the two callers. Ending the call ; Hang up to end the current call. You are then recalled to the first call. Call transfer This function allows you to transfer an external call to an internal subscriber. # You are engaged in a call.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with other devices Automatic call pickup deactivated Automatic line seizure must be deactivated Step by Step Info / Lift the handset. | Press this key to listen to the caller. 4 Press this key to answer the call. # Speak to the caller.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with the entrance telephone Operation with the entrance telephone Step by Step Configuring the entrance telephone 1. 2. 3. 4. Press for selection menus. Select using [] and [OK]: Service Set up → Settings → Set up user → Set up device. 9 Select using [] and [ ]: (required internal subscriber 21 or 22). Select using [] and [OK]: Device select. → Door*.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 Operation with the entrance telephone Step by Step 1. 2. 3. 4. 5. 6. Activating/deactivating call forwarding Press for selection menus. Select using [] and [OK]: Service Set up → Settings → Set up user → Set up device. Select using [] and [ ]: (required internal subscriber). Select using [] and [OK]: Forw.entr.tel.. Select using [ ]: (destination call number).
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 About your system Step by About your system Step Care Clean the base station with an antistatic wipe. Never use a dry cloth as this could cause a build-up of static electricity! Ambient conditions ● Do not install the base in a damp location, e.g. bathroom or shower. ● Avoid direct contact with heat sources (e.g radiators). ● Do not expose the base to direct sunlight.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 About your system Troubleshooting Step by Step Making calls: / - Handset "dead"? Charge the batteries (➔ see handset operating instructions). / - Message: "Network section busy"? Public network is overloaded. Try again later. / - Message: "External lines seized"? / - Message: "No Trunk Access"? Both ISDN lines are already in use. Activate line reservation, see -> page 55.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01 About your system Contact Step by Should faults develop with the device, contact the Siemens Hotline: Step 먛__ Ireland: +49 1850777277 So that repairs may be carried out under the guarantee, the guarantee card (completed and stamped at the point of sale) must be provided along with the faulty device. If a defect occurs, contact the point of sale responsible for returning faulty devices to the manufacturer.
menue.fm Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 09.01.01 Menu Displays Step by Step Menu Displays Overview of displays when is pressed Comfort handset menu Settings Step 1 Audio Security Step 2 Ringer Volume Ringer Melody Short ring tone Handset Volume Loudspeaker Key beeps Batt.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 menue.fm 09.01.01 Menu Displays Step by Step Device user options (short cuts) > Selecting Step 1 Step 2 Select device user D V options 9 Step 3 Start user options Handset user options (short cuts) > Programming Step 1 9 Step 2 New entry Edit entry Step 3 Name < Contents 9 see below Handset user options (short cuts) > Contents Step 4 Step 5 User options ready Save entry Step 6 Step 7 9 Net Provider Insert function 9 Select no.
menue.fm Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 09.01.01 Menu Displays Step by Step Service Set up > Missed calls Step 1 Missed calls Step 2 = Step 3 Phone Number 9 Step 4 Dial Number Net Provider Copy to Dir. Change number Delete entry Display entry Service Set up > Call preparat. Step 1 Temp.withhold Step 2 Step 3 = * MSN next call = Temp. Keypad Cancel CallPark = * = MSN ** Park No. This feature is only available if supported by the net provider.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 menue.fm 09.01.01 Menu Displays Step by Step Service Set up > Night Service Step 1 etc. Step 2 Forward. dest.? Step 3 External Internal Answ. Machine Start time: HH:MM End time: HH:MM Sat/Sun all day = Step 4 Dest.Call No. INT11:IInternal11 * AM1: AM1 NO.91 AM2: AM2 NO.92 AM3: Internal 93 Save entry Cancel Save entry Cancel Service Set up > Settings > Security Step 1 Enter PIN: Step 2 Change PIN Base Lock Accesses Emergency Nos.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 menue.fm 09.01.01 Menu Displays Step by Step Service Set up > Settings > System settings Step 1 Music on Hold Date/time Cost/duration (Request base PIN) Access Code AM Auto. Pickup Spec. function Step 2 Internal OFF Set time 24 hours 12 hours Date DD.MM Datum MM.TT Cost overview Access type Step 4 < = Day: Month: Year: Hour: Minute: Save entry Cancel = = = = Total Amount Units Centr.Off. Costs Cent.Off. No Rate Rate --.
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 menue.fm 09.01.01 Menu Displays Step by Step Service Set up > Settings > ISDN settings Step 1 Set up MSN Anonymous Call Forward. Dest. 76 Step 2 MSN x Step 3 Edit entry Ringer Melody Delete entry Display entry Step 4 9 Ringer Melody: x = Name = Lg.-dist. Code National: 0 International: 00 Int. Enq. Call Ext. Enq. Call Transition(ECT) Int. Call Forw. Ext. Call Forw. Reject All Busy on Busy Auto.
giga3070SIX.fm Gigaset 3070isdn, GB, A31008-G3070-B100-2-7619 09.01.
Gigaset 3070isdn, GB, A31008-G3070-B100-2-7619 giga3070SIX.fm 09.01.
giga3070SIX.fm Gigaset 3070isdn, GB, A31008-G3070-B100-2-7619 09.01.