IP Phone User's Manual
Table Of Contents
- The handset at a glance
- Base station at a glance
- Contents
- Safety precautions
- Gigaset C450 IP - more than just making calls
- VoIP - Making calls via the Internet
- First Steps
- Menu tree
- Making calls with VoIP and the fixed network
- Operating the handset
- VoIP telephony via the Gigaset.net
- Using the directory and lists
- SMS (text messages)
- Setting handset/base station
- Adjusting the loudspeaker volume
- Setting the ringer volume
- Activating/deactivating advisory tones
- Using the handset as an alarm clock
- Changing the base station system PIN
- Restoring the handset default settings
- Restoring the base station to factory settings
- Setting the default connection
- Assigning the phone a fixed IP address
- Web configurator
- Appendix
28
Appendix
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / appendix.fm / 15.02.2007
Version 4, 16.09.2005
Appendix
Care
¤ Wipe the base station and handset with
a damp cloth (do not use solvent) or an
antistatic cloth.
Never use a dry cloth. This can cause
static.
Contact with liquid
If the handset has come into contact with
liquid:
¤ Switch the handset off and remove
the batteries immediately.
¤ Allow the liquid to drain from the hand-
set.
¤ Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven etc.).
¤ Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.
Questions and answers
If you have any queries about the use of
your phone, you can contact us any time
at
www.siemens.com/gigasetcustomercare
.
You can also find information on common
problems and possible solutions in the full
user guide.
!