User guide

67
Connecting the base to the PABX
Gigaset C590/C595 / GBR / A31008-M2101-L101-1-7619 / pabx.fm / 29.04.2009
Version 4, 16.09.2005
Connecting the base to
the PABX
The following settings are only necessary
if your PABX requires them; see the PABX
user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Dialling modes and recall
The current setting is indicated by Ø.
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Dial pulsing (DP)
v ¢
Ï
¢ Telephony ¢ Dialling Mode
s Select dialling mode and press
§Select§ (Ø =selected).
Setting recall
Your phone is preset at the factory for
operation on the main connection.
For operation on a PABX, you may have
to change this value. Please refer to the
user guide for your PABX.
v
¢
Ï
¢ Telephony ¢ Recall
s Select recall and press §Select§
(
Ø = set value).
Possible values are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
400 ms, 600 ms, 800 ms.
Saving an access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
v
¢
Ï
¢ Telephony ¢ Access Code
~ Enter or change access code,
max. 3 digits.
§Save§ Press the display key.
If an access code has been saved:
u The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
calls list or answering machine list.
u The access code must be entered when
dialling manually and when manually
entering directory, emergency/shortcut
numbers and SMS centre numbers.
u If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u An existing access code is deleted
using Ñ.
•
•