Specifications

121
Administration and Status Information
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / admin_router.fm / 21.07.2005
Schablone 2005_05_02
Setting Idle time before log off:
ì Enter the period in minutes after which the configuration program is to be aborted
if no entry is made. The default setting is 10 minutes. If you enter the value 0, the
program will never be aborted automatically.
ì Click OK to accept the settings.
Setting up Remote Management
Remote Management enables a PC that is not in your local network to be used to con-
figure the Gigaset SX541 WLAN dsl with a standard Web browser. You can permit
Remote Management for one particular PC or for any PCs.
For security reasons, this function is only available if you have previously changed the
system password for your device (see page 120).
ì In the Administration menu, select Remote Management.
ì Select the On option for Remote Management if you wish to permit Remote Man-
agement.
You can start remote management by entering the public IP address in your Internet
browser. As Internet providers often change this each time you dial in, it is worth using
dynamic DNS (see page 90) in addition.
ì You can change the Port via which you can access the configuration program from
the Internet, for example in order to hide and protect the configuration program
against unauthorised access.
Please remember:
If you ever forget your System Password, you will have to reset your Gigaset SX541
WLAN dsl (see page 18). Please bear in mind that this will restore all the settings to
the factory configuration. No System Password will be active either.