Specifications

Configuring the Local Network

Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_tcpip.fm / 21.07.2005

Schablone 2005_05_02

Synchronising the TCP/IP Settings with the Gigaset SX541 WLAN dsl

You have now configured your PC so that it is ready to be connected to the Gigaset

SX541 WLAN dsl. You now have to release the old TCP/IP settings and synchronise them

with the settings of your Gigaset SX541 WLAN dsl.

ì Click Start – Run.

ì Type WINIPCFG and click OK.

There may be a slight delay before the IP Configuration window appears.

ì Select your network adapter from the selection list.

ì Click Release and then on Update.

If the default IP address (192.168.2.1) of the Gigaset SX541 WLAN dsl was not

changed, the IP address should now read 192.168.2.x (with x being a number

between 2 and 255). The Subnet Mask must always be 255.255.255.0 and the

Standard Gateway must have the IP address of the Gigaset SX541 WLAN dsl

(192.168.2.1). These values confirm that your Gigaset SX541 WLAN dsl is working.

ì Click OK to close the IP Configuration window.