User manual

C675 User manual system English
18
Base Setting under PABX
Only if your Base connected to PABX, the following settings shall effect
Tone/Pulse
Press 菜单 v ▲ ▼ TONE / PULSE OK
v ▲ ▼ Select (TONE ,PULSE) OK
Flash Time
Press 菜单 v ▲ ▼ FLASH TIME OK
v ▲ ▼ Select (100， 300， 600) OK
PABX PREFIX
Normally the prefix number, such as “0”, is need to be added when you want to
dial an external number if you phone is under PABX. This number can be
automatically added if you set it in the Prefix.
Press 菜单 v ▲ ▼ PABX PREFIX OK
v Input a PREFIX number (2 digits at most) OK
Net Work Setting
Press 菜单 v ▲ ▼ NET WORK OK
v ▲ ▼ Select (PUBLIC NET or PRIVATE NET) OK
Dial an external number
Precondition: Set Network to PRIVATE NET and set a PABX PREFIX number.
Enter the phone number then press c or d
e.g.
Set PABX PREFIX number to 9
Enter 1234，Press c or d，number dialled out is 1234
Enter 12345，Press c or d，number dialled out is 9P12345
Caution:
PABX PREFIX will not implement if you press c or d and then enter number.
Quick Index
TONE/PULSE
FLASH TIME
PABX/PREFIX
NET WORK