Specifications

112
Symbols and typographical conventions used
CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / appendix.fm / 02.03.2007
Version 2, 21.12.2006
Appendix
Symbols and typographical conventions used
This section explains the meaning of certain symbols and typographical conventions that
are used in this user guide.
~ Enter digits or letters.
§Menu§ The display functions currently in the bottom display line are shown in reversed
highlights. Press the relevant display key to launch the function.
q Press up or down on the control key, e.g. when scrolling.
c / Q / P etc.
Press the matching key on the handset.
External Calls / Internal Calls (example)
Select one of the menu functions (External Calls or Internal Calls) from the list
and press
§OK§.
§Menu§ ¢ Audio Settings ¢ Ringer Melody (example)
Press
§Menu§. Select Audio Settings using q and press §OK§. Select Ringer Melody
using q and press
§OK§.
Care
¤ Wipe down the base station and handset with a damp cloth (no solvents) or an anti-
static cloth.
Never use a dry cloth. This can cause a build up of static.
Contact with liquid
If the handset has come into contact with liquid:
¤ Switch the handset off and remove the batteries immediately.
¤ Allow the liquid to drain from the handset.
¤ Pat all parts dry, then with the battery compartment open and the keypad facing down
place the handset in a dry, warm place for at least 72 hours (not in a microwave, oven
etc.).
¤ Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
!