Specifications

19
Making settings for VoIP telephony on the base station phone First steps
CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / starting.fm / 02.03.2007
Version 2, 21.12.2006
After changing the display:
q Select your VoIP provider and press §OK§.
The necessary data for your VoIP provider is downloaded and saved on the phone.
Entering user data for your first VoIP account
Enter the VoIP user data for the first VoIP account. This data can be obtained from your VoIP
provider.
Username:
Is only displayed when your provider requires a user name.
Enter name and press
§OK§.
Authentication Name:
Enter name and press
§OK§.
Authentication Password:
Enter password and press
§OK§.
If you have made all the necessary entries, the Gigaset.net assistant is started. You have
the option of entering yourself in the Gigaset.net online directory with your own choice
of name.
Please note:
If the data for your VoIP provider is not offered for download, you must make the necessary settings
with the Web configurator at a later stage (page 90).
Press the display key §Back§ twice. You can then conduct the following steps with the connection
assistant (see "Entering user data for your first VoIP account").
You can enter five additional VoIP accounts (VoIP phone numbers) via the Web configurator at a later
stage (page 90). Your phone can then be reached via up to six different phone numbers. You can
assign the phone numbers to the individual handsets that are registered with the base station as
sending and receiving numbers (page 100).
Please note:
When making these entries, please remember the VoIP user data is case sensitive. If necessary, press
and hold the
# key to switch between upper and lower case and digits.
This step is only carried out when the device is first put into service (when the connection assistant
is started up for the first time). You can create the entry via the Gigaset.net directory (page 34).