Specifications

95
Configuring telephone connections
CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / web_server.fm / 02.03.2007
Version 2, 21.12.2006
Outbound proxy
Enter the (fully qualified) DNS name or the IP address of your provider's outbound proxy.
Outbound proxy port
Enter the number of the communication port used by the outbound proxy.
The default port is 5060.
Saving settings on the phone
¤ Click Set to save the changes.
The Connections list will be shown after saving (see Figure 3 on page 89).
If you want to reject the changes that have been made, click Cancel. The Web page is re-
loaded with the data saved on the phone.
Please note: If you do not make any entries for a lengthy period, the connection to the Web
configurator is automatically terminated. Unsaved entries are lost. If necessary, implement
temporary security measures. You can subsequently continue the entry and make changes
if necessary.
Activating a new connection
If you have configured a new VoIP connection, you must also activate it.
In the Connections list:
¤ Activate the relevant option in the Active column ( = activated).
Your phone will register itself with the VoIP provider using the relevant access data. If the
registration is successful, after a short period the Status column will show registered for the
connection. You can now be reached on this VoIP phone number.
Please note:
With many providers, the outbound proxy is identical to the SIP proxy.
Please note:
Once the new entry has been made, the VoIP phone number for each handset is assigned as a receiv-
ing number. For how to adjust the assignment, see page 100.