Operation Manual

97
Press keys:
Connecting the base station to a PABX
Gigaset 4015 Comfort, IM, A31008-G4015-J102-1-7619
ANLAGEN.FM
16.5.02
Connecting the base station to
a PABX
Some telephone systems do not support the CLIP
function and therefore also do not allow SMS messag-
es to be sent or received.
See the operating instructions for the telephone
system.
Dialling mode and flash time
Step 1: Changing the dialling mode
You only need to change the dialling mode if your PABX
does not operate with preset tone dialling (DTMF dual-
tone multifrequency). Please refer to the operating
instructions for your PABX.
Options:
– Tone dialling (DTMF)
– Dial pulsing (DP)
©
Open the menu.
åååååååååååååååååååååååååååååååå
D
Base Settings
[
Select the menu item and confirm.
åååååååååååååååååååååååååååååååå
D
Add. Features
[
Select the menu item and confirm.
åååååååååååååååååååååååååååååååå
Dialling Mode
[
Select the menu item and confirm.
DE [
Select dialling mode you want and confirm.
Step 2: Setting the flash time
Prerequisite: your PABX requires a flash time other
than the preset flash time (to set up a connection to the
telephone network.
Please refer to the operating instructions for your
PABX.
©
Open the menu.
åååååååååååååååååååååååååååååååå
D
Base Settings
[
Select the menu item and confirm.
åååååååååååååååååååååååååååååååå
D
Add. Features
[
Select the menu item and confirm.
åååååååååååååååååååååååååååååååå
D
TBR
[
Select the menu item and confirm.
DE [
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.