Operation Manual

16
First steps
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / starting.fm / 20.01.11
Version 4, 16.09.2005
Setting the date and time
There are two methods of setting the date and time:
u By default, your base is configured so that the date and time are transferred from
a time server on the Internet, provided it is connected to the Internet.
You can activate/deactivate the synchronisation with a time server via the Web
configurator. Detailed information can be found in the Web configurator's user
guide on the enclosed CD.
u You can also set the date and time manually via the base menu or one of the reg-
istered handsets (see below).
To ensure you have the correct time for incoming calls and to use the alarm clock
and calendar, the date and time must be set.
Setting the date and time manually
If the date and time have not been set, the time will flash in the base's idle display
(00:00) and
§Time§ is displayed above the right display key.
¤ Press the key under §Time§ on the display screen.
Enter day, month and year as an 8-digit number via the keypad,
e.g., Q4QO2QQ for 04.09.2010. This overwrites the dis-
played date.
¤ Press down on control key s to scroll to the time entry line.
¤ Enter the hours and minutes in 4-digit format via the keypad,
e.g., QM5for 07:15 am.
¤ Press the display key §Save§ to save the settings.
Please note
To protect your phone and its system settings from unauthorised access, please
define a 4-digit number code (system PIN) known only to yourself. This code
must be entered before you can register/de-register handsets or alter your
phone's LAN settings.
The default system PIN is 0000 (4 x zero). For instructions on changing the PIN
(
¢ page 92).
Calls Time