Operation Manual

26
Making calls
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / telephony.fm / 20.01.11
Version 4, 16.09.2005
Making calls
If the display backlight is deactivated
(
¢ page 87), it can be reactivated by press-
ing any key.
Making an external call
External calls are calls made via the public
telephone network (fixed line, mobile net-
work).
~c Enter the number and pick up
the receiver. The number is
dialled after approximately
3.5 seconds.
Or:
c~ Pick up the receiver and enter
the number.
Instead of picking up the receiver, you can
also press the handsfree key dor the
Headset (
¢ page 85) function key to make
a call using the handsfree function or head-
set.
In this user guide, each of these variants is
indicated by "c Pick up receiver".
Continuing a call on a headset
Prerequisite: You have assigned the Head-
set function to a function key on the base
before connecting the headset
(
¢ page 85).
Bluetooth headset:
Prerequisite: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the base
(
¢ page 78).
¤ Press the Headset function key on the
base.
It can take up to five seconds to establish a
connection between the base and a head-
set.
For further information about Bluetooth
headsets see page 81.
Wire-bound headsets:
Prerequisite: The headset is connected to
the base (
¢ page 11).
¤ Press the Headset function key on the
base.
For more information about wire-bound
headsets see page 84.
Please note
u You can use the red end key T to
cancel the dialling operation.
u You are shown the duration of the call
while the call is in progress.
u Dialling with the directory (page 39)
or call and redial list (page 36) saves
you from repeatedly keying in phone
numbers.
u If you have handsets registered to the
base, you can make internal calls free
of charge (page 75).
Recommendation
We recommend you assign the Headset
function to a function key on the
base (
¢ page 85) and use this function
key to accept/transfer calls – even if your
headset has a push-to-talk key.
Please note
If both a Bluetooth headset and a wire-
bound headset are connected to
the base, the call is transferred to the
Bluetooth headset.