Operation Manual

27
Making calls
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / telephony.fm / 20.01.11
Version 4, 16.09.2005
Making calls via your mobile
connection (Link2mobile)
You can make calls from the base via the
GSM mobile connection on your Bluetooth
mobile.
Prerequisites:
Ending a call
& Replace the receiver or press the
red end key T.
Or if you are making the call with a headset:
¤ Press the Headset function key or red
end key Ton the base.
Accepting a call
An incoming call is signalled in three ways:
by ringing, by a display on the screen and by
the flashing handsfree key d.
Accept the call by:
¤ Picking up the receiver.
¤ Pressing the handsfree key d.
¤ Pressing the display key §Accept§.
¤ Pressing the display key Ô to divert
the call to the answering machine.
– Press the display key Ô to divert
the call to the answering machine.
To deactivate the ringer, press the
§Silence§
display key. You can accept the call as long as
it is displayed on the screen.
u Your GSM mobile is registered to the base
(
¢ page 82).
u The mobile is within range of the base
(less than 10 m) and has a Bluetooth con-
nection to the base.
u The mobile connection is assigned to the
base as the send connection or the base
can select the GSM connection as the
send connection (
¢ page 82).
The GSM connection is set as send
connection:
~c Enter the number, including the
area code, and pick up the
receiver. The number is dialled.
"Select at each call" is set instead of a
send connection
~c Enter the number, including the
area code, and pick up the
receiver. You are offered a
choice between a fixed line and
a GSM connection.
q Select the GSM connection.
§Dial§ / w Press the display key or the mid-
dle of the control key.
GSM connection/line selection via a
function key
Prerequisite: You have assigned the GSM
connection or line selection to a display key
or function key (
¢ page 85).
§Sel. Line§ Press the display or function
key.
q Select GSM connection if neces-
sary.
c /
§Dial§ Pick up the receiver or press the
display key.
Press
§Dial§ to activate handsfree
mode on the base (open listen-
ing;
¢ page 30).
~ Enter the number with the area
code. The number is dialled
approximately 3.5 seconds after
the last digit is entered.
Please note
A call is cancelled as soon as the mobile is
outside the range of the base (about
10 m) or Bluetooth is deactivated.