Operation Manual

28
Making calls
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / telephony.fm / 20.01.11
Version 4, 16.09.2005
Accepting a call on a headset
Prerequisite: You have assigned the Head-
set function to a function key on the base
before connecting the headset
(
¢ page 85).
Bluetooth headset:
Prerequisite: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the handset
(
¢ page 78).
¤ Press the Headset function key on the
base.
Wire-bound headsets:
Prerequisite: The headset is connected to
the base (
¢ page 11).
¤ Press the Headset function key on the
base.
For more information about wire-bound
headsets see page 84.
Accepting calls to your mobile
connection (Link2mobile)
You can register your GSM mobile with the
base via Bluetooth and accept calls to the
mobile on the base (or a registered handset)
(
¢ page 82).
Prerequisites:
Calls to the mobile (to the mobile number)
are signalled on the base. The Bluetooth
name of the mobile is shown as the receive
connection in the display (e.g., for mobile)
¤ On the base: Pick up the receiver.
Calling Line Identification
When you receive a call, the caller's number
is displayed on the screen if the following
prerequisites are met.
u Your network provider supports CLIP, CLI.
– CLI (Calling Line Identification): The
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): The caller's number is dis-
played.
u You have requested CLIP from your net-
work provider.
u The caller has arranged CLI with the
network provider.
Recommendation
We recommend you assign the Headset
function to a function key on the
base (
¢ page 85) and use this function
key to accept calls – even if your headset
has a push-to-talk key.
Please note
If both a Bluetooth headset and a wire-
bound headset are connected to the
base, the call will be accepted on the
Bluetooth headset.
u The mobile is within range of the base
(< 10 m) and has a connection to
the base.
u The GSM connection is assigned to the
base (or handset) as receive connection
(
¢ page 82).
Please note
A call is cancelled as soon as the mobile is
outside the range of the base (about
10 m) or Bluetooth is deactivated.