Operation Manual

32
Making calls using network services
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / netservices.fm / 20.01.11
Version 4, 16.09.2005
Making calls using
network services
Network services are functions that your
network provider makes available to you.
Please note:
u Some settings cannot be made simulta-
neously on the base and registered hand-
sets. If this is the case, you will hear a neg-
ative acknowledge tone.
u Some network services may only be used
if you have requested them from your
network provider (there may be an extra
charge).
¤ If you require assistance, please contact
your network provider.
Configuring general settings
for all calls
Anonymous calling – withholding
number
You can make anonymous calls (CLIR =
Calling Line Identification Restriction).
Your phone number will not be displayed
when you make outgoing calls. You are call-
ing anonymously.
Prerequisite: You may need to have
requested the relevant service (feature) from
your network provider in order to make
anonymous calls.
Activating/deactivating "anonymous
calling" for all calls
When the function is activated, the phone
number is withheld for all calls.
The withhold number function is activated
for the base and all registered handsets.
v
¢ Ç Select Services
Withhold # All Calls
Select and press
§OK§ (μ =on).
General call divert (CD)
With call divert the call is diverted to another
external connection.
v
¢ Ç Select Services ¢Call Divert
¤ You can enter data in the following fields:
Status
Activate/deactivate call divert.
Phone Number
Enter the number to which the call is to
be diverted.
When
Select All Calls / When Busy / No Answer.
All Calls: Calls are diverted immediately
i.e., no calls are signalled on your base.
No Answer: Calls are diverted if no one
accepts the call within several rings.
When Busy: Calls are diverted when your
line is busy.
§Save§ Press the display key.
A connection is established to the telephone
network to activate/deactivate call divert.
¤ After confirmation from the fixed line,
press the red end key T.
Activating/deactivating call
waiting for external calls
If the function is activated, during an exter-
nal call you will hear a call waiting tone to
signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display.
The caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call
Please note
Diverting calls to your phone number
can result in additional costs. Please con-
sult your provider.