Operation Manual

33
Making calls using network services
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / netservices.fm / 20.01.11
Version 4, 16.09.2005
Activating/deactivating call waiting
v ¢ Ç Select Services ¢Call Waiting
Status Select On / Off to activate/deac-
tivate call waiting.
¤ Press the display key §Save§.
The base establishes a connection to the
exchange to send a corresponding code.
¤ After confirmation from the fixed line,
press the red end key T.
Configuring settings during
an external call
Initiating ringback when busy/no
answer
If the person you are calling does not answer
or their line is busy, you can initiate ringback.
Ringback when busy: The ringback will take
place as soon as the party in question termi-
nates the current call.
Ringback when no answer: The ringback will
take place as soon as the party in question
has made a call.
Initiate ringback:
§Ringback§ Press the display key.
If ringback has been successfully activated,
the message Ringback activated is dis-
played. The call is ended. The base returns to
idle status.
If ringback has not been successfully acti-
vated in the exchange, Ringback not possi-
ble! appears in the display.
& / T Replace the receiver or press the
red end key.
Initiating ringback during an external
consultation call:
You wish to initiate an external consultation
call during an external call. The line is busy or
there is no answer.
§Options§ ¢Ringback
Select and press
§OK§.
§End§ Press the display key to return to
the party on hold.
Accepting a waiting call
You are making an external call and hear the
call waiting tone.
§Accept§ Press the display key.
Once you have accepted the waiting call,
you can switch between the two callers
("Call swapping"
¢ page 34).
Rejecting a waiting call
You can hear the call waiting tone but do not
want to speak to the caller.
§Options§ ¢Reject Waiting call
The caller hears the busy tone.
Please note
A ringback display key/menu function
for activating ringback only appears on
the base if the exchange supports this
feature.
Please note
u You can only activate one ringback at
a time. If you activate a second ring-
back, the first one is automatically
deleted.
u The ringback can only be received on
the device that activated the ring-
back.
Please note
u Without CLIP, a waiting call is only
announced with a signal tone.
u An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u For instructions on accepting a wait-
ing external call during an internal
call,
¢ page 76.