Operation Manual

68
Using the network mailbox
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / Net-AB.fm / 20.01.11
Version 4, 16.09.2005
Using the network
mailbox
Some providers offer answering machines
on the network – network mailboxes.
You must have requested the network mail-
box from your network provider. You can
store the number of the network mailbox on
the base.
Network mailbox: entering
numbers
v ¢
Ì
Answering Machine
¢ Network Mailbox
~ Enter or change the phone
number for the network mail-
box if necessary.
§Save§ Press the display key.
To activate/deactivate the network mailbox,
please refer to information from the network
provider.
Configuring an answering
machine for quick dial
You can use quick dial to make direct calls to
the network mailbox or the integrated base
answering machine.
Assigning key 1, changing
assignment
Quick dial settings are device-specific.
You can assign a different answering
machine to key  on the base and each
registered handset.
No answering machine is preconfigured for
quick dial in the default settings.
 Press and hold key .
Or:
v
¢
Ì
Answering Machine
¢ Set Key 1
Network Mailbox / Answering Machine
Select entry and press
§OK§
(Ø =on).
You have selected the local Answering
Machine:
Quick dial is immediately activated for the
local answering machine on the base.
T Press and hold red end key (idle
status).
You have selected the network
mailbox:
If a number is already stored for the network
mailbox, quick dial is activated immediately.
T Press and hold red end key (idle
status).
If no number is saved for the network mail-
box, you are asked to enter the number of
the network mailbox.
~ Enter the number for the net-
work mailbox.
§Save§ Press the display key.
T Press and hold red end key (idle
status).
Quick dial is activated.
Please note
You can only assign quick dial to one
answering machine.
You can also call the network mailbox for
directly via the message key
(
¢ page 69).