Operation Manual

78
Connecting/using other devices
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / HS_and_other_Devices.fm / 20.01.11
Version 4, 16.09.2005
Using Bluetooth devices
Your base can use Bluetooth™ to communi-
cate wirelessly with other Bluetooth devices.
You can use Bluetooth to register the follow-
ing devices on your base:
u One Bluetooth headset
u Up to five Bluetooth GSM mobiles or data
devices (PC, PDA).
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the base.
To use the phone numbers, dialling codes
(country and area code) must be stored on
the base (page 92).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Activating/deactivating Bluetooth
mode
v ¢ ò Bluetooth
Activation Select and press §Change§ to acti-
vate or deactivate Bluetooth
mode (³ = activated).
When the base is in idle status, the ò icon in
the header indicates that Bluetooth mode is
activated (
¢ page 4).
As soon as Bluetooth is activated, your base
is visible to all Bluetooth devices in the
receiving range (maximum 10 m) and can
communicate with all of the devices
included in the "known devices" list.
Alternatively, you can assign Bluetooth inter-
face activation to a display or function key
on the base (
¢ page 85). This then allows
you to activate/deactivate Bluetooth at the
push of a button.
Registering Bluetooth devices
To register a Bluetooth device, you need to
search for it and then add it to the list of
known devices.
The list of known devices can hold a maxi-
mum of one headset and five data devices/
mobiles.
Searching for Bluetooth devices
The distance between the base in Bluetooth
mode and the activated Bluetooth device
(headset, mobile or data device) should be
no more than 10 m.
Any incoming calls are ignored during the
search.
v
¢ ò Bluetooth ¢ Search for Headset
/ Search for Mobile /
Search for Data Device
Bluetooth mode is activated automatically
on the base if it is not already active. The
search is started. This can take up to
30 seconds.
The Bluetooth names of the devices found
are displayed in a list (abbreviated if neces-
sary). If no name has been assigned to a
device, the device address is shown.
Please note
u If you register a headset, any headset
that is already registered will be over-
written.
u If you would like to use a headset
already registered to another device
(e.g., a mobile) with your base, please
deactivate this connection before
you start the registration process.
u Depending on the Bluetooth profiles
supported by your mobile, it can be
registered as a data device and a
mobile.
Please note
The Search for Data Device function will
list all Bluetooth devices found with the
exception of headsets (list includes
multi-service devices).