Operation Manual

83
Connecting/using other devices
Gigaset DL500A analog / IM-NORD EN / A31008-N3103-R201-2-7619 / HS_and_other_Devices.fm / 20.01.11
Version 4, 16.09.2005
Bluetooth is activated on the base. The base
connects to the mobile.
Defining the GSM connection as a
send connection
Prerequisite: At least one mobile is in the list
of known devices or a mobile is temporarily
connected to the base.
v
¢
Ï
Settings
¢ Telephony
¢ Send Connections
A list of internal parties is displayed (base,
handsets).
q Select the internal parties that
should be assigned a new GSM
connection and press the
§OK§
display key.
r Choose Select at each call or
the GSM connection as the send
connection. The Bluetooth
name of the activated mobile is
shown for the GSM connection.
§Save Press the display key to save the
changes.
Select at each call: This allows you to choose
whether to use the fixed line connection or
the GSM connection for each call:
~c Enter the number, including the
area code, and pick up the
receiver. Fixed Line and the
name of the GSM connection
are available for selection.
q Select a connection.
§Dial§ / w Press the display key or the mid-
dle of the control key.
Defining the GSM connection as a
receive connection
Prerequisite: At least one mobile is in the list
of known devices or a mobile is temporarily
connected to the base.
v
¢
Ï
Settings
¢ Telephony
¢ Receive Connections
A list of internal parties is displayed (base,
handsets, answering machine).
q Select the internal party to be
assigned to the GSM connec-
tion as a receive connection and
press the display key
§OK§.
r Select Yes if the fixed line con-
nection should continue to be
the receive connection for the
internal party. Select No if it
should not be the receive con-
nection.
s Switch to the GSM connection.
r Select Yes if the GSM connec-
tion should be the receive con-
nection for the internal party.
§Save§ Press the display key to save the
changes.
Simultaneous Bluetooth
connections
Your base can connect to both a headset and
a data device/mobile via Bluetooth at the
same time.
However, please note the following:
Please note
u You can also assign this function to a
function key on the base,
¢ Connect Mobile on page 85.
u If the mobile is taken beyond the
Bluetooth range of the base, you
should re-establish the connection
between the two as soon as the
mobile is within range again. This will
ensure that a GSM call either to the
base or from the base using the GSM
connection is transferred.
Establishing a manual connection:
¤ Select the mobile from the list of
known devices.
¤ Select §Options§ ¢ Connect Mobile
and press
§OK§.
Or:
¤ Press the function key Connect
Mobile.